Înregistrați-vă
Criterii de filtrare
  • Minimum Machining Diameter
  • Cutting Direction
  • Overall Length L1
  • Shank diameter
  • Protrusion length (L/D)
  • Dimensions f1(mm)
  • Est. zile de expediere
    • Toate
    • În 6 zile lucrătoare

Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER

Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER

Cod piesă:

S-au găsit. 3 candidați nedefiniți.
    Cantitate:

    Lista codurilor de piese

    Număr de articole

    Minimum Machining Diameter

    Cutting Direction

    Overall Length L1

    Shank diameter

    Protrusion length (L/D)

    Dimensions f1

    (mm)

    Blade Inclination Angle λs

    (°)

    Dimensions l4

    (mm)

    Cantitate minimă per comandă
    15
    Left-hand
    150
    10
    100
    9
    -3
    60
    1 bucăți
    15
    Right-hand
    150
    10
    60–100
    9
    -3
    60
    1 bucăți
    18
    Left-hand
    180
    12
    120
    11
    -1
    72
    1 bucăți
    Preț unitar (fără TVA)(preț unitar cu TVA incluse)
    Dată de expediere standard
    842.30 €
    ( 1,002.34 € )
    6 zile lucrătoare
    843.18 €
    ( 1,003.38 € )
    6 zile lucrătoare
    990.05 €
    ( 1,178.16 € )
    6 zile lucrătoare

    Informații detaliate

    Informații de bază

    [Features]
    A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
    The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
    The EasyFix sleeve allows for quick and accurate center height adjustment.
    For inner-diameter turning (bore cutting) operations with longer protrusions.
    For suppressing chattering.