Înregistrați-vă
Criterii de filtrare
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • Overall Length L(mm)
  • Type
  • Est. zile de expediere
    • Toate
    • În 6 zile lucrătoare
    • În 7 zile lucrătoare
    • În 9 zile lucrătoare

UTDF 2-Flute Flat Drill

Cod piesă:

S-au găsit. 8 candidați nedefiniți.
    Cantitate:

    Lista codurilor de piese

    Număr de articole

    Hole diameter (drill diameter) D

    (mm)

    Groove Length L

    (mm)

    Overall Length L

    (mm)

    Shank Diameter φd

    (mm)

    Cantitate minimă per comandă
    11
    22
    100
    12
    1 bucăți
    2.5
    10
    50
    4
    1 bucăți
    5.1
    20.4
    60
    6
    1 bucăți
    6.5
    13
    70
    8
    1 bucăți
    7
    28
    80
    8
    1 bucăți
    8.6
    34.4
    80
    10
    1 bucăți
    9
    36
    80
    10
    1 bucăți
    9.5
    19
    90
    10
    1 bucăți
    Preț unitar (fără TVA)(preț unitar cu TVA incluse)
    Dată de expediere standard
    160.80 €
    ( 191.35 € )
    6 zile lucrătoare
    67.54 €
    ( 80.37 € )
    7 zile lucrătoare
    80.95 €
    ( 96.33 € )
    7 zile lucrătoare
    100.77 €
    ( 119.92 € )
    7 zile lucrătoare
    100.77 €
    ( 119.92 € )
    9 zile lucrătoare
    119.53 €
    ( 142.24 € )
    9 zile lucrătoare
    139.89 €
    ( 166.47 € )
    9 zile lucrătoare
    139.89 €
    ( 166.47 € )
    9 zile lucrătoare

    Informații detaliate

    Informații de bază

    [Features]
    · The 180° tip angle design allows for hole drilling in various applications that are difficult with a normal drill.
    · Adopts a 30° torsion angle for stable and high efficiency hole drilling with excellent chip discharge.
    · Has a thinned shape for improved chip discharging and sharpness.
    · The guiding effect of the double margin to the inner wall of the hole ensures straightness during hole drilling, even for non-planar shapes.
    · Product lineup to accommodate various tap pilot hole diameter sizes.

    Atenție

    • Adjust the cutting conditions based on the machinery rigidity, the state of the workpiece clamp and the shape of the workpiece to be machined.
    • Water-soluble or oil-based machining oil is recommended. Perform step machining if it becomes clogged with cutting chips.