Diamond Cone Indenter for Rockwell Test, Standard Type
Mitutoyo indenters for Rockwell hardness test
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| Accreditation Body | DAkkS | Accreditation Standard | ISO 17025 | Calibration | with |
|---|---|---|---|---|---|
| Collar Diameter(mm) | 13 | Collar Thickness(mm) | 3 | Cone Angle(degree) | 120 |
| Function Test | without | Indenter Diameter(mm) | 10 | Material | diamond |
| Method | Rockwell | Product line | HR-100. HR-200. HR-300. HR-400. HR-500. HR-600. AR-10. AR-20ARK | Shaft Length(mm) | 11 |
| Shaft Diameter(mm) | 6.34 | Standard | ISO 6508-2, ASTM E18 Class B | Tip Radius | 0.2 |
| Total Length(mm) | 27 | Type | Diamond cone indenter | Usable Length(mm) | 16 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.