Square Connectors

?* Information on days to ship and prices

• • Promotional pricing

  

  57 Series Soldering / DIP-Type Connector

  FUJIKURA (DDK)

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-SUB plug 180 °

  CONNFLY

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.39 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  PCR Series

  HONDA TSUSHIN KOGYO

  Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  MR Series Case

  HONDA TSUSHIN KOGYO

  Case for the MR series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Half-Pitch I / O Connector (Original Type) DX Series

  HIROSE ELECTRONIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.21 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  57F Series Flat Cable Crimping Connector

  FUJIKURA (DDK)

  The 57F series is an all-plastic flat cable crimping connector.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  PCS Series Cases

  HONDA TSUSHIN KOGYO

  PCS series case.
  
  [Features]
  • Board-to-cable cases are available for 20 - 96 contacts: Pressure contact connection is standard for cables (AWG #28 or 30), reducing wiring labor.
  · A soldered type is also available.
  • FCC and other EMI shielding: Sturdy construction is well suited for interfaces.
  · Quick lock using metal lock spring.
  · Models supporting panel relays are also available.
  · Accessories for preventing incorrect insertion are also available.
  • Wide range (34 - 150 contacts) of board-to-board connections available: Design minimizes insertions and extractions, even with a high number of contacts.
  • Housings are structured so that all cleaning fluid drains out when cleaning away flux (mold-type male connectors).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.79 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  JN6 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These small servo motor connectors are all reversible by 180° and 4-pin versions are included for power supplies, 2-pin versions are included for brakes, and 7-pin versions are included for encoders.
  
  [Features]
  · The JN6 was developed as a small servo motor after the JN4 and JN5 series.
  · These connectors are all reversible by 180° and 4-pin versions are included for power supplies, 2-pin versions are included for brakes, and 7-pin versions are included for encoders.
  · All plastic - lightweight and low-cost.
  · Small and low-profile: 4-pin with overall plug length of 28 mm and plug height of 11.4 mm.
  · Receptacle attachment: 4-pin with mold-in attachment to motor body. 2-pin, 7-pin: press-fit to motor body.
  · Wire connection method: 4-pin receptacle utilizes a circuit board through hole. The 4-pin plugs as well as 2-pin and 7-pin versions are all crimped.
  · Robust fitting: secure fitting using four screws.
  · Waterproofing performance: IP67.
  · Cable extraction.
  · Two cable extraction directions are available (180°).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EPIC® H-A 3 MTGVB

  LAPP

  Benefits
  · The arrow is a new design element on the housing surface and makes it easy to find and easy to connect in tight spaces and possibly poorly visible areas of application
  · Meets protection class IP 65 when locked
  · The integrated brass SKINTOP® cable gland is used for sealing and strain relief cable entries Compared to housings where the cable gland is added separately, the overall size of the housing is more space-saving
  · The cable coupler hood can be connected to many of the most popular hoods on the market
  · The EPIC® H-A 3 series includes the smallest housings in heavy-duty industrial connectors and ensures secure connections in the smallest possible space
  · Locking takes place using a double latch
  
  Application
  · For protecting the connector insert against environmental influences
  · Suitable for outdoor use
  · For use with many EPIC® rectangular connector inserts
  · For connecting devices and machines to a power supply in various applications
  · Withstands high environmental and mechanical stress

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-SUB receptacles set

  TRU COMPONENTS

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  D-Sub Connector Plug Cases (EMI Shielded), CTH Series

  HIROSE ELECTRONIC

  These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
  
  [Features]
  · Because the lock mechanism is a screw type mechanism it is rugged and reliable.
  · Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
  · In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
  • Use screws to ground the drain wire of the cable with a clamp.
  • Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
  • For FD*D, however, wire a fused I/O cable when using the case.
  • CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX31 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
  
  [Features]
  [High-density implementation achieved with a large number of pins]
  · These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
  [Mechanical lock structure ensures secure fitting]
  · The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
  [Double locking structure reliably prevents loss of contact]
  · Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
  · The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
  [Low insertion force structure with easy insertion and extraction]
  · A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
  [Tin and gold plating are available for the contact finish]
  · The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
  [Misconfiguration-prevention types also available]
  · Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
  · Crimping enables easy connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-SUB bus connector SUBCON 15

  PHOENIX CONTACT

  Select to compare

  Configure now
  Starting from∗ ：	51.17 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  HDC HA Series

  WEIDMUELLER

  Insert for industrial plug-in connectors, consisting of contact element and insulating body.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Half-Pitch I / O Connector (for Fanuc Servo Amps), FI Series

  HIROSE ELECTRONIC

  This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
  
  [Features]
  ・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
  ・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
  ・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
  ・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
  ・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Solder Lug

  VOGT VERBINDUNGSTECHNIK

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  MR Series

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  PCR Series Case

  HONDA TSUSHIN KOGYO

  This is a PCR series case.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  DF11 Series 2‑mm Grid Double-Row Connector (UL / CSA Standard Certified Product)【1-500 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  IL-AG5 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · Mechanical lock structure for secure mating.
  · The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
  · Unique housing structure.
  · The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
  · The double locking structure securely prevents contact dropout.
  · The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
  · The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
  · Standard, and differently shaped incorrect insertion prevention types are available.
  · The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
  · Contact featuring highly reliable design.
  · Box type, which is resilient to external effects such as deformation due to external forces.
  · Two-ply spring structure with excellent contact element characteristics.
  · The primary lance is on the inside of the contact provides horizontal insertion prevention.
  · Structure prevents reverse, horizontal insertion during housing mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX34 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
  
  [Features]
  ・A small-type/high density connector with abundant variations.
  A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
  ・Single-row / two-row types are available supporting 3–40 pins.
  ・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
  ・Reliable mating due to mechanical locking structure.
  ・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
  ・Double-layered stop construction to prevent contact removal.
  ・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
  ・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
  ・The socket lock is protected by a unique housing structure.
  ・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
  ・High-reliability socket contact
  ・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
  ・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
  · Crimped type for easy wire connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.40 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han A Series Connector (Screw-Type Wire Connection)

  HARTING

  This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  D-Sub Connectors - XM2 / XM3

  OMRON

  [Features]
  ・ These are D-sub connectors that are ideal for OA equipment interfaces.
  ・ These are shielded connectors for EMI countermeasures.
  ・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
  ・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
  ・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
  ・ A compact, sturdy type with a metal shell.
  ・ Various fasteners and ground conductor fittings are available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  CP-3.3 3.30 mm Pitch Inertia Lock Wire-to-Wire System Plug (504694)

  MOLEX

  The Molex 3.30 mm pitch wire-to-wire connector family of products with inertia locks help to avoid incomplete coupling problems
  that may occur in wire-to-wire harnesses in white goods applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EPIC® H-A 3 AGSV

  LAPP

  Benefits
  · “Agsv” variant made of lightweight and chemically resistant thermoplastic housing for safe connectors
  · UL certification according to technical data enables the product to be used on the North American market
  · VDE-tested quality
  · Wide range of inserts available
  · MAgsv variant with robust die-cast zinc housing for reliable plug-in connections
  · The small design size make it suitable for use in limited spaces
  
  Application
  · For protecting the connector insert against environmental influences
  · For use with many EPIC® rectangular connector inserts
  · Suitable for outdoor use, subject to the temperature range
  · For connecting devices and machines to a power supply in various applications

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EPIC® H-B 10 AD-LB

  LAPP

  Benefits
  · The smallest housing with single and double lever The right housing is available for every application
  
  Application
  · Light & sound technology
  · Plant engineering
  · Plastics industry

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

  MISUMI

  [Features] MIAutomatic SteelI's original, low-cost, environmentally resistant and waterproof E-type plug. Thanks to the cable's screw connection, it can be easily connected with a slotted screwdriver without the need for special tools. The screw connection is equipped with a contact. Please confirm the type and plug or socket before ordering.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-10,000 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-Sub, D02, D02-M15 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
  
  [Features]
  ・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
  ・Interchangeable with different connector types and commonly used accessories.
  ・The shell joint shape has polarity, fully preventing accidental reverse insertion.
  ・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
  ・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
  ・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX23A Series, Contact

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  57GE Series Straight DIP Ribbon Receptacle.

  FUJIKURA (DDK)

  [Features]
  ・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
  ・Type 40 (receptacle for I/F).

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han-Modular Series: Various Modules【1-2 Pieces Per Package】

  HARTING

  It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Han Series Hood / Housing

  HARTING

  Han Series Hoods/Housings.
  [Features]
  · Shielded through various locking mechanisms to provide high reliability suitable for industrial use.
  · Superior nature of materials and design have been recognized in the past 10 years.
  · HanA and HanB products have become a standard in the industrial field.
  [Applications]
  · Ideal for industrial use.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

  ILME

  CK / CKS Small screw type / spring type, 10A / 250 V, Insert
  
  [Features]
  ・CK/CKS.
  ・Small screw type / spring type.
  ▪ 10A/250 V insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  EPIC® H-BE 24 Screw termination

  LAPP

  Benefits
  · Inserts from the EPIC® H-BE series are regarded as classics in industry and are ideal for use at higher voltages and currents
  · Wide variety of suitable housing variants
  · UL certification according to technical data enables the product to be used on the North American market
  · VDE-tested quality
  · Made of robust polycarbonate (flammability class V-0 according to the UL94 testing procedure for the flammability of plastics)
  · Available with or without wire protection The wire protection enables stranded wires without conductor end sleeves to be connected directly
  · In the EPIC® H-BE series, inserts of different connection types can be combined with one another (screw, crimp, cage clamp or push-in) within the same size
  · Easy to service screw connection enables assembly without special tools
  · Also certified according to UL 508 A/UL 2237 for applications in control cabinets
  · Compliant with standards for use in rail vehicles (fire behaviour test according to DIN EN 45545-2:2016-02, requirements sets R22 and R23, hazard levels HL1, HL2 and HL3)
  
  Application
  · For transmission of control signals to actuators
  · Suitable for wiring inside control cabinets
  · Typical applications include platform, lighting and lifting technology
  · For connecting devices and machines to a power supply in various applications

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-SUB pin strip set

  TRU COMPONENTS

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Pin Connector

  TRU COMPONENTS

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.44 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Printed-circuit board connector, PCB connector, FMCD

  PHOENIX CONTACT

  Select to compare

  Configure now
  Starting from∗ ：	22.11 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

• 

  Printed-circuit board connector, Power connector for ME-MAX housing, PCO

  PHOENIX CONTACT

  Select to compare

  Configure now
  Starting from∗ ：	5.04 €
  Min. Shipping Days ：	40 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  17JE Series Soldering Type Connector

  FUJIKURA (DDK)

  17 Series (Dsub type) soldering connection type square connector for cable equipment.
  [Features]
  · Square connector for solder wire connections, with solder cup type contact.
  · Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
  · The hood is metalized plastic, which provides weight reduction and a high shielding effect.
  · Either the pin connector or the socket connector can be selected.
  · There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
  · The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
  [Applications]
  · Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Han Q Series Connector (Crimp Wire Connection)

  HARTING

  This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.39 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  One-Touch Lock D-Sub Hood

  PROVERTHA

  One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  CNE / CSE / CCE Common Use Screw Type, Spring Type, Pressure Bonding Type 16A / 500V Insert

  ILME

  CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert
  
  [Features]
  ・CNE/CSE/CCE.
  ・General purpose screw type / spring type / crimped type.
  ▪ 16A / 500V.
  ▪ Insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.43 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Micro-Lock 1.25 mm Pitch System (504186)

  MOLEX

  The Micro-Lock 1.25 mm pitch system is available for 1-row and 2-row versions and as straight and right-angled types.
  The 1-row version is available for 2 to 16 pins, while the 2-row version is available for 16 to 40 pins. This system
  supports environmental standards by using low-halogen materials in the housings and harnesses.
  In addition to the natural color of the standard products, colored articles are also available to fit the (coupling) application.
  
  [Main Features]
  · The buckling prevention function prevents header pins from bending when coupling
  · Small and low-profile space-saving design
  · Despite being tin-plated, it realizes a low-insertion force and easy removal
  · Equipped with a positive lock for improved mechanical stability, coupling retention and a clicking sensation to inform the user when coupling has taken place
  · Despite its 1.25 mm pitch, it supports 26 AWG and realizes 1.5 A pins, providing greater design freedom.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...