Carbide Square End Mills（Blade tip shape：Sharp Edge）
Search by sub-category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 11.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
[Features]
-Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-All-purpose cutter with 2 cutting edges for a wide range of applications
-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°
-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
Carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
The 2D flute length type with high versatility achieves high-precision processing including grooving- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series- Volume Discount
Configure nowStarting from∗ ： 11.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that produces high-quality finish supports a wide range of machining areas- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
Carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- L (Long)
Configure nowMin. Shipping Days ： 5 Days -
Configure now
Starting from∗ ： 35.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 11.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 64.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
[Features]
-The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)
-All-purpose cutter with 4 cutting edges for a wide range of applications
-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°
-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill for countersink, 3-flute / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-By leaving the round land width (the width of the cylindrical part without clearance angle at the circumferential groove), it is possible to achieve an effect similar to that of a reamer and improve the surface roughness of the machined surface
-The end cutting edge is almost flat, making it ideal for finishing counterbores.
-The 3-flute shape suppresses chatter that can occur during drilling and counterboring
-Optimal for machining in the low to medium speed range due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness, achieving long life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 53.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide long neck square end mill, 2-flute / long neck model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Can select the optimum body length for machining deep parts of the workpiece
-Optimal for machining in the low to medium rotation range due to the universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
MISUMI
[Features]
-When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model
MISUMI
Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- EXL (Extra Long)
Configure nowStarting from∗ ： 52.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Mill, Sharp Corner, 2-Flute 2DLCSC
NACHI(FUJIKOSHI)
End-mill for aluminum, copper alloy. Adopts a sharp corner.- Volume Discount
Configure nowStarting from∗ ： 54.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Configure nowStarting from∗ ： 25.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.- Volume Discount
Configure nowStarting from∗ ： 154.00 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
C-CES2000S UT Coat, 2-Flute Square (Sharp Corner)
UNION TOOL
[Features]
· C-CES: 2-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceConfigure nowStarting from∗ ： 25.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
CPR for Resin Processing, 2-Flute Long Neck Square
UNION TOOL
[Features]
· Long Neck End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck part- Volume Discount
Configure nowStarting from∗ ： 34.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Graphite Solid End Mill 2-Flute, Long Type
EIKOSHA
GEL2, carbide-graphite solid end mill (long 2NT) [machining application (machining form)]: Plane/face/groove/counter-operation, [tool material]: Carbide [Materials]: Aluminium/Copper/Graphite [Number of cutting edges (pcs.)] 2 [Spiral angle]: Standard twist (30 to 44°) [Corner shape]: Corner shape- Volume Discount
Configure nowStarting from∗ ： 158.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cutting, and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 75.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Miniature End Mill KMSE‐2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cutting, and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel, and cast iron.- Volume Discount
Configure nowStarting from∗ ： 72.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 9.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 9.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Features]
-Standard TiAlN Coating- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 14.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Features]
-Standard TiAlN coating- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 15.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 30.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flank shape, it is resistant to chatter,
-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- SR
Configure nowMin. Shipping Days ： 7 Days -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps
-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool
-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters
-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model
MISUMI
[Features]
-The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool
-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast
-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter
-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
MISUMI
[Features]
-The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-The tool's rigidity is highlighted by shortening the flute length and overall length for shrink fit
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The tool has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 15.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
-Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suitable for high-speed machining with flute length 1.5 times the cutting edge diameter
-Optimal for low to medium speed machining due to universal 30° helix angle
-it has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 12.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
MISUMI
The lineup of fine intermediate flute length between short and regular is available only in Misumi- Volume Discount
- TS
- General Steel
- 2 Flutes
- SR
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Regular 2-groove size that can be used for a wide range of applications
-Optimal for low to medium speed machining due to the universal 30° helix angle
-It is equipped with a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
MISUMI
Lineups of fine intermediate flute length between regular and long are available only in MISUMI.- Volume Discount
- TS
- General Steel
- 2 Flutes
- RL
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The 4D flute length supports deep cavity milling
-Optimal for low to medium rotation machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- L (Long)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model
MISUMI
[Features]
-The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)
-The rigidity of the tool is emphasized by shortening the flute length and overall length for shrink fit
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 19.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suitable for high-speed machining with 1.5 times groove length
-Optimal for low to medium speed machining due to universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 21.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
[Features]
-The coating shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-Optimal for low to medium speed machining due to universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill, 4-flute / 2.5D Flute Length model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Slot length is 2.5 times the cutting edge diameter between short and regular flutes
-Optimal for machining in low to medium rotation range due to universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- SR
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide square end mill, 4-flute / 3.5D Flute Length model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The flute length is 3.5 times the cutting diameter between the normal flute and the long flute
-Optimal for low to medium speed machining due to the universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- RL
Configure nowMin. Shipping Days ： 5 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | UNION TOOL | UNION TOOL | EIKOSHA | KYOWA SEIKO | KYOWA SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model | Carbide square end mill, 4-flute / 2D Flute Length (short) model | XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | Carbide square end mill, 2-flute / 3D Flute Length (regular) model | Carbide square end mill, 4-flute / 4D Flute Length (long) model | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide radius end mill for countersink, 3-flute / short model | Carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide long neck square end mill, 2-flute / long neck model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model | Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model | WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | XAL series carbide square end mill, 2-flute / 3D Flute Length model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model | TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 2.5D Flute Length model | TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model | TSC series carbide square end mill, 2-flute / 3.5D Flute Length model | TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model | TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model | TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model | TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC series carbide square end mill, 4-flute / 2.5D Flute Length model | TSC series carbide square end mill, 4-flute / 3.5D Flute Length model | |||||||||||
| Starting from∗ | 11.15 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 11.08 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 35.95 € *Unit price with basic configuration Volume Discount | 11.11 € *Unit price with basic configuration Volume Discount | 64.71 € *Unit price with basic configuration Volume Discount | - Volume Discount | 53.95 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 52.47 € *Unit price with basic configuration Volume Discount | 54.03 € *Unit price with basic configuration Volume Discount | 25.40 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 154.00 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 25.90 € *Unit price with basic configuration | 34.04 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 158.48 € *Unit price with basic configuration Volume Discount | 75.96 € *Unit price with basic configuration Volume Discount | 72.80 € *Unit price with basic configuration Volume Discount | 9.70 € *Unit price with basic configuration Volume Discount | 9.84 € *Unit price with basic configuration Volume Discount | 14.27 € *Unit price with basic configuration Volume Discount | 15.82 € *Unit price with basic configuration Volume Discount | 30.48 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 15.68 € *Unit price with basic configuration Volume Discount | 12.80 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 19.07 € *Unit price with basic configuration Volume Discount | 21.38 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | Same day | 6 Days | 7 Days | Same day | 6 Days | 8 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
| Blade diameter (D)(φ) | 1 ～ 20 | 0.1 ～ 20 | 1 ～ 20 | 0.1 ～ 6 | 0.4 ～ 12 | 1 ～ 12 | 2 ～ 12 | 1 ～ 20 | 2 ～ 22 | 1 ～ 20 | 3 ～ 16 | 3 ～ 20 | 0.1 ～ 6 | 1 ～ 20 | 3 ～ 12 | 1 ～ 20 | 0.1 ～ 30 | 6 ～ 12 | 0.2 ～ 12 | 0.5 ～ 2.5 | 1.2 ～ 25 | 3 ～ 6 | 0.1 ～ 3 | 0.2 ～ 20 | 0.1 ～ 20 | 1 ～ 20 | 2 ～ 20 | 3 ～ 12 | 1 ～ 20 | 6 ～ 16 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 2 ～ 20 | 0.5 ～ 11.98 | 0.5 ～ 20 | 0.5 ～ 12 | 0.2 ～ 20 | 0.5 ～ 12 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 1 ～ 20 | 1 ～ 16 | 1 ～ 16 |
| work material | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Blade length (ℓ)(mm) | 2 ～ 40 | 0.2 ～ 40 | 2 ～ 40 | 0.2 ～ 9 | 1.2 ～ 36 | 4 ～ 48 | 6 ～ 26 | 3 ～ 60 | 3.5 ～ 30 | 3 ～ 60 | 8 ～ 32 | 5 ～ 60 | 0.2 ～ 10 | 2.5 ～ 45 | 15 ～ 60 | 3 ～ 38 | 0.2 ～ 60 | 9 ～ 18 | 0.3 ～ 36 | 1 ～ 5 | 20 ～ 80 | 10 ～ 15 | 0.2 ～ 8 | 0.4 ～ 40 | 0.3 ～ 60 | 2.5 ～ 38 | 6 ～ 38 | 12 ～ 30 | 3 ～ 38 | 5 ～ 40 | 4 ～ 56 | 3 ～ 38 | 4 ～ 56 | 5 ～ 75 | 0.5 ～ 12 | 0.75 ～ 30 | 1.25 ～ 30 | 0.6 ～ 60 | 1.75 ～ 42 | 4 ～ 48 | 2 ～ 12 | 3 ～ 18 | 2 ～ 40 | 2.5 ～ 40 | 3.5 ～ 56 |
| Number of flutes(sheet) | 4 | 2 | 4 | 2 | 2 | 4 | 2 | 4 | 4 | 4 | 3 | 4 | 2 | 4 ～ 6 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 3 | 3 | 3 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 |
| Type | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | High Helical | Square | Square | Square | Long-Neck Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | DLC | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | Non-Coated | - | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Shank diameter (d)(mm) | 4 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 6 | 3 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 6 ～ 20 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 4 ～ 6 | 6 ～ 20 | 6 ～ 12 | 4 ～ 20 | 4 ～ 32 | 6 ～ 12 | 4 ～ 12 | 3 ～ 4 | 6 ～ 25 | 6 | 3 | 3 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 4 ～ 20 | 6 ～ 16 | 6 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 3 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 16 |
| Overall Length (L)(mm) | 40 ～ 110 | 35 ～ 110 | 40 ～ 110 | 50 ～ 100 | 40 ～ 85 | 45 ～ 100 | 40 ～ 75 | 45 ～ 130 | 80 ～ 200 | 45 ～ 130 | 50 ～ 110 | 45 ～ 130 | 40 ～ 100 | 60 ～ 130 | 60 ～ 130 | 40 ～ 100 | 45 ～ 140 | 80 ～ 140 | 45 ～ 90 | 38 ～ 70 | 120 ～ 250 | 50 | 40 | 40 ～ 110 | 40 ～ 110 | 40 ～ 105 | 40 ～ 105 | 50 ～ 90 | 60 ～ 110 | 60 ～ 110 | 60 ～ 130 | 60 ～ 110 | 60 ～ 130 | 60 ～ 150 | 40 ～ 65 | 40 ～ 105 | 45 ～ 85 | 40 ～ 130 | 45 ～ 95 | 45 ～ 100 | 40 ～ 65 | 40 ～ 75 | 40 ～ 110 | 45 ～ 105 | 45 ～ 120 |
| Underneck length (ℓ1)(mm) | - | 17 ～ 73 | 17 ～ 73 | 0.3 ～ 60 | 23 ～ 55 | 29 ～ 70 | - | - | 30 ～ 140 | 23 ～ 92 | - | 23 ～ 92 | 0.3 ～ 60 | 20 ～ 92 | - | - | - | 20 ～ 60 | - | 2 ～ 32 | - | - | - | - | - | - | - | - | 18 ～ 73 | 22 ～ 78 | 26 ～ 92 | 18 ～ 70 | 26 ～ 92 | 30 ～ 110 | - | - | 20 ～ 55 | 23 ～ 92 | 26 ～ 65 | 29 ～ 76 | - | - | 17 ～ 72 | 20 ～ 73 | 26 ～ 88 |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts |
| Blade tip shape | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.775
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.875
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.4
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.3688
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.5626
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9502
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.5438
- 7.6
- 7.7
- 7.8
- 7.9
- 7.9502
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.1186
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.525
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.3124
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.7188
- 10.8
- 10.9
-
11～11.9126
- 11
- 11.0998
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.5062
- 11.6
- 11.7
- 11.8
- 11.9
- 11.9126
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.8938
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.4874
- 13.5
- 13.6
- 13.7
- 13.8
- 13.8938
-
14～14.9
- 14
- 14.1
- 14.2
- 14.2748
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.875
- 15.88
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.4498
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.2626
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.05
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6502
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.4376
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.225
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.4188
- 23.5
- 23.6
- 23.7998
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.1874
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.0002
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7876
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.575
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9626
- 30
- 30.1752
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
- 30.9626
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.75
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.3502
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.4998
- 36.5
- 36.8
-
37～37.6936
- 37
- 37.2
- 37.5
- 37.6
- 37.6936
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.7002
- 39
- 39.2
- 39.5
- 39.6
- 39.7002
-
40～40.8
- 40
- 40.4
- 40.4876
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.28
- 41.5
- 41.6
-
42～42.8498
- 42
- 42.4
- 42.5
- 42.8
- 42.8498
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.4312
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.2252
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.1876
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.7502
- 58
- 58.5
- 58.7502
-
59～59.5376
- 59
- 59.5
- 59.5376
-
60～60.5
- 60
- 60.5
-
62
-
63～63.5
- 63
- 63.5
-
64
-
65
-
66
-
67
-
70～70.5
- 70
- 70.5
-
72
-
75
-
76
-
77.95
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
[5-75/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- DIJET (31)
- OKAZAKI SEIKO (27)
- OSG (23)
- NACHI(FUJIKOSHI) (20)
- NS TOOL (17)
- UNION TOOL (10)
- KYOWA SEIKO (8)
- KYOCERA (8)
- EIKOSHA (7)
- SANKO MFG (6)
- ASAHI TOOLS (5)
- ATOM (5)
- THE CUT (5)
- WIDIN (3)
- PROCHI (0)
- SANDVIK (0)
- TAIYO-TOOL (0)
- TOYO DRILL (0)
- 7 LEADERS (0)
- GCT (0)
- GUHRING (0)
- SPEED TIGER (0)
- VAN_HOORN (0)
CAD data type
-
- 2D
- 3D
Categories related to Carbide Square End Mills
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.