Square End Mills (Carbide)（Type：Square Page 8）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Unequal Lead End Mill Regular 4-Flute for High Hardness Steel RF100H 3895
GUHRING
Capable of machining 52 HRC or harder high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 88.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Unequal Lead End Mill for High Efficiency Finishing, Long, 5-Flute RF100S / F 3897
GUHRING
Variable division blade allows stable machining without chattering.- Volume Discount
Configure nowStarting from∗ ： 101.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Unequal Lead End Mill Regular 4-Flute for Soft Steel RF100F 3629
GUHRING
It has a strong torsion angle and excellent sharpness, making it ideal for viscous materials.- Volume Discount
Configure nowStarting from∗ ： 74.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Unequal Lead End Mill Regular 4-Flute for Soft Steel with Oil Hole RF100F 3366
GUHRING
This type has an oil hole for unequal lead mild steel.- Volume Discount
Configure nowStarting from∗ ： 128.57 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
All Purpose Square End Mill Short 2-Flute 3633
GUHRING
Machining is possible with a wide range of materials, from raw materials to hardened materials.- Volume Discount
Configure nowStarting from∗ ： 42.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Short 3-Flute 3558
GUHRING
Machining is possible with a wide range of materials, from raw materials to hardened materials. Excellent cost performance. with the same price as 2-flute blades.- Volume Discount
Configure nowStarting from∗ ： 42.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Short 4-Flute 3637
GUHRING
Machining is possible with a wide range of materials, from raw materials to hardened materials.- Volume Discount
Configure nowStarting from∗ ： 51.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Stub 3-Flute 3684
GUHRING
The total length has been set short, making it ideal for use with automatic lathes. Machining is possible with a wide range of materials, from raw materials to hardened materials. Those with φ2 or more have flats on the shank.- Volume Discount
Configure nowStarting from∗ ： 25.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Regular 3-Flute 3560
GUHRING
Machining is possible with a wide range of materials, from raw materials to hardened materials. Excellent cost performance. with the same price as 2-flute blades.- Volume Discount
Configure nowStarting from∗ ： 44.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Regular 4-Flute 3649
GUHRING
Machining is possible with a wide range of materials, from raw materials to hardened materials. Suitable for side surface machining.- Volume Discount
Configure nowStarting from∗ ： 59.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Long 2-Flute 3021
GUHRING
Suitable for machining deep grooves or in deep locations.- Volume Discount
Configure nowStarting from∗ ： 67.13 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
All Purpose Square End Mill Long 3-Flute 3680
GUHRING
Suitable for machining deep grooves or in deep locations.- Volume Discount
Configure nowStarting from∗ ： 92.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Square End Mill Long 4-Flute 3023
GUHRING
Suitable for side wall machining at deep positions, as well as for wide side finishing.- Volume Discount
Configure nowStarting from∗ ： 80.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Unequal Lead End Mill Short 3-Flute RF100U 3893
GUHRING
Highly versatile 3-flute endmill.- Volume Discount
Configure nowStarting from∗ ： 55.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
All Purpose Unequal Lead End Mill Short 4-Flute RF100U 3731
GUHRING
With unequal lead (2 or more different torsion angles) reducing resonance, reduced vibration or noise during machining, good finish surface, and much longer product life are achieved. The shanks include flats.- Volume Discount
Configure nowStarting from∗ ： 74.46 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
All Purpose Unequal Lead End Mill Semi-Long 4-Flute RF100U 3839
GUHRING
A versatile unequal lead type which supports a wide range of materials from raw materials to hardened materials.- Volume Discount
Configure nowStarting from∗ ： 96.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Unequal Lead End Mill Regular 3-Flute RF100U 3891
GUHRING
Highly versatile 3-flute endmill.- Volume Discount
Configure nowStarting from∗ ： 57.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Unequal Lead End Mill Regular 4-Flute RF100U 3736
GUHRING
A versatile unequal lead type which supports a wide range of materials from raw materials to hardened materials.- Volume Discount
Configure nowStarting from∗ ： 67.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
All Purpose Unequal Lead End Mill Long 4-Flute RF100U 3627
GUHRING
High efficiency / high precision machining is possible in deep engraving.- Volume Discount
Configure nowStarting from∗ ： 192.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESS (Short)
KYOCERA
[Features]
A solid end mill suitable for general steel, high hardness steel, stainless steel and other workpieces.Short design, 2 cutting edges.
MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Features]
Suitable for finishing of general steel, stainless steel, aluminium, etc.- Volume Discount
Configure nowStarting from∗ ： 21.52 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
[Features]
A solid end mill suitable for general steels, high hardness steels, stainless steels and other work pieces, medium design, 2 cutting edges.
MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Features]
Suitable for finishing general steels, stainless steels, aluminium, etc.- Volume Discount
Configure nowStarting from∗ ： 17.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESL (Long)
KYOCERA
[Features]
A solid end mill suitable for general steel, high hardness steel, stainless steel and other work pieces, long design, 2 cutting edges.
MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Features]
Suitable for finishing general steel, stainless steel, aluminium, etc.Configure nowStarting from∗ ： 69.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKS (Short)
KYOCERA
MEGACOAT for excellent abrasion and heat resistance, a high-quality cutting edge and reduced burrs for high precision machining.- Volume Discount
Configure nowStarting from∗ ： 28.63 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKM (Medium)
KYOCERA
MEGACOAT for excellent abrasion and heat resistance, a high-quality cutting edge and reduced burrs for high precision machining.- Volume Discount
Configure nowStarting from∗ ： 28.63 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Focus on Accuracy / Finished Surface 4FESM
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel and other workpieces, 4 cutting edges.
The MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
It can be drilled and chamfered at the same time.
[Features]
Suitable for finishing general steel, stainless steel, aluminium, etc.- Volume Discount
Configure nowStarting from∗ ： 59.37 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW
KYOCERA
[Features]
A solid end mill suitable for general steel, stainless steel and other workpieces, 3 cutting edges.
The MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
The sharp edges can suppress burrs.
[Features]
Suitable for automatic turning of general steel, stainless steel, aluminium, etc.Configure nowStarting from∗ ： 45.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW
KYOCERA
[Features]
A solid end mill, suitable for general steel, stainless steel and other workpieces, 4 cutting edges.
The MEGACOAT coating and high quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
The sharp edges can suppress burrs.
[Features]
Suitable for automatic turning machining of general steel, stainless steel, aluminium, etc.Configure nowStarting from∗ ： 132.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type)
KYOCERA
Unique variable distribution and lead allow excellent chatter resistance.- Volume Discount
Configure nowStarting from∗ ： 133.50 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type)
KYOCERA
Unique variable distribution and lead allow excellent chatter resistance.Configure nowStarting from∗ ： 115.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
For Counterbore Processing 2ZDK
KYOCERA
This is dedicated thrust machining equipment, so it cannot be used for lateral feed machining.- Volume Discount
Configure nowStarting from∗ ： 78.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill with Blades OCEB
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.- Volume Discount
Configure nowStarting from∗ ： 142.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
PCD 2-Flute Spiral Square End Mill DSE-2
KYOWA SEIKO
The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.Configure nowStarting from∗ ： 575.41 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide End Mill with 2 Flutes for Resin Processing PSE-2
KYOWA SEIKO
[Features]
An end mill with medium cutting edge length for machining plastics, 2 cutting edges.
This product can be used alone for edge milling a workpiece due to its square shape.
[Features]
Suitable for plate milling, side milling, slot milling, plunging (Z-feed), ramp milling and facing.- Volume Discount
Configure nowStarting from∗ ： 52.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide End Mill for Rib for Resin Processing PRE-2
KYOWA SEIKO
Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.- Volume Discount
Configure nowStarting from∗ ： 63.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
KYOWA SEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / CountersinkingConfigure nowStarting from∗ ： 70.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Flutes and Corner C Face KSC-2
KYOWA SEIKO
[Features] It can be used for flat surface machining, side machining, grooving, and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 77.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cutting, and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 75.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
End Mill with 2 Carbide Solid Blades KSEA-2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cut and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 77.02 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Miniature End Mill with 4 Flutes KMSEA-4
KYOWA SEIKO
[Features]
A miniature carbide end mill suitable for general steel, stainless steel and other workpieces, 4 cutting edges.
The AlTiN-based coating provides high durability and abrasion resistance.
The high cutting speed and high production efficiency lead to a reduction in overall production costs.- Volume Discount
Configure nowStarting from∗ ： 110.86 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Miniature End Mill KMSE‐2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cutting, and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel, and cast iron.- Volume Discount
Configure nowStarting from∗ ： 72.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Miniature End Mill KMSEA-2
KYOWA SEIKO
[Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cut and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.- Volume Discount
Configure nowStarting from∗ ： 87.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stream, Carbide Square End Mill CT-STE4
TAIYO-TOOL
[Features]
· The first two types available in the STREAM Series are "Carbide Square End Mill (Model Number: CT-STE4)" and "Carbide Radius End Mill (Model Number: CT-STE4R)", both adopting a unique anti-vibration blade (wave-type blade) that reduces chattering when cutting hard-to-cut materials or titanium. Coating with excellent heat and oxidation resistance.- Volume Discount
Configure nowStarting from∗ ： 169.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 615.93 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
End Mill For Roughing & Semi-Finishing (Double Fluted) Cylindrical Shank With Corner Radius
SANDVIK
- Volume Discount
Configure nowStarting from∗ ： 152.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill For Roughing & Semi-Finishing (Center Cut / Double Fluted) Hardness: 43 ≦ HRC ≦ 63
SANDVIK
[Features]
A solid end mill for maximum productivity with all types of work material and machining processes
The double-fluted shape ensures both rigidity and the effective handling of cutting chips
For end milling of all types of work material- Volume Discount
Configure nowStarting from∗ ： 121.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | DIJET | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | TAIYO-TOOL | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Unequal Lead End Mill Regular 4-Flute for High Hardness Steel RF100H 3895 | Unequal Lead End Mill for High Efficiency Finishing, Long, 5-Flute RF100S / F 3897 | Unequal Lead End Mill Regular 4-Flute for Soft Steel RF100F 3629 | Unequal Lead End Mill Regular 4-Flute for Soft Steel with Oil Hole RF100F 3366 | All Purpose Unequal Lead End Mill Semi-Long 4-Flute RF100U 3839 | All Purpose Unequal Lead End Mill Regular 3-Flute RF100U 3891 | All Purpose Unequal Lead End Mill Regular 4-Flute RF100U 3736 | Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESS (Short) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | Emphasis On Accuracy / Finished Surface 2-Blades Pin Card 2FESL (Long) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKS (Short) | Emphasis On Accuracy / Finished Surface 2-Blades Blade Edge Reinforced Type 2FEKM (Medium) | Focus on Accuracy / Finished Surface, for Automatic Lathes 3FESW | Focus on Accuracy / Finished Surface, for Automatic Lathes 4FESW | Axel Mill, High Feed High Efficiency Type, 4MFK (Square Type) | Axel Mill, High Feed High Efficiency Type, 4MFR (Radius Type) | Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC | End Mill For Roughing & Semi-Finishing (Double Fluted) Cylindrical Shank With Corner Radius | End Mill For Roughing & Semi-Finishing (Center Cut / Double Fluted) Hardness: 43 ≦ HRC ≦ 63 | ||||||||||||||||||||||||||
| Starting from∗ | 88.90 € *Unit price with basic configuration Volume Discount | 101.40 € *Unit price with basic configuration Volume Discount | 74.46 € *Unit price with basic configuration Volume Discount | 128.57 € *Unit price with basic configuration Volume Discount | 42.73 € *Unit price with basic configuration Volume Discount | 42.73 € *Unit price with basic configuration Volume Discount | 51.74 € *Unit price with basic configuration Volume Discount | 25.16 € *Unit price with basic configuration Volume Discount | 44.06 € *Unit price with basic configuration Volume Discount | 59.21 € *Unit price with basic configuration Volume Discount | 67.13 € *Unit price with basic configuration Volume Discount | 92.39 € *Unit price with basic configuration Volume Discount | 80.97 € *Unit price with basic configuration Volume Discount | 55.96 € *Unit price with basic configuration Volume Discount | 74.46 € *Unit price with basic configuration Volume Discount | 96.72 € *Unit price with basic configuration Volume Discount | 57.52 € *Unit price with basic configuration Volume Discount | 67.38 € *Unit price with basic configuration Volume Discount | 192.52 € *Unit price with basic configuration Volume Discount | 21.52 € *Unit price with basic configuration Volume Discount | 17.83 € *Unit price with basic configuration Volume Discount | 69.55 € *Unit price with basic configuration | 28.63 € *Unit price with basic configuration Volume Discount | 28.63 € *Unit price with basic configuration Volume Discount | 59.37 € *Unit price with basic configuration Volume Discount | 45.19 € *Unit price with basic configuration | 132.21 € *Unit price with basic configuration | 133.50 € *Unit price with basic configuration Volume Discount | 115.04 € *Unit price with basic configuration | 78.73 € *Unit price with basic configuration | 142.97 € *Unit price with basic configuration Volume Discount | 575.41 € *Unit price with basic configuration | 52.69 € *Unit price with basic configuration Volume Discount | 63.27 € *Unit price with basic configuration Volume Discount | 70.68 € *Unit price with basic configuration | 77.02 € *Unit price with basic configuration Volume Discount | 75.96 € *Unit price with basic configuration Volume Discount | 77.02 € *Unit price with basic configuration Volume Discount | 110.86 € *Unit price with basic configuration Volume Discount | 72.80 € *Unit price with basic configuration Volume Discount | 87.60 € *Unit price with basic configuration Volume Discount | 169.80 € *Unit price with basic configuration Volume Discount | 615.93 € *Unit price with basic configuration Volume Discount | 152.70 € *Unit price with basic configuration Volume Discount | 121.10 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 24 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 6 Days | 6 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days |
| Blade diameter (D)(φ) | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 2 ～ 20 | 2 ～ 20 | 2 ～ 20 | 0.5 ～ 20 | 2 ～ 20 | 2 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 10 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 4 ～ 25 | 10 ～ 25 | 1.5 ～ 3 | 0.5 ～ 2.5 | 4 | 3 | 3 | 3.5 ～ 10 | 4 | 12 | 10 | 8 | 4.2 ～ 4.5 | 10.5 ～ 60 | 0.2 ～ 6 | 0.2 ～ 6 | 0.3 ～ 5 | 1 ～ 16 | 1 ～ 6 | 3 ～ 6 | 1 ～ 4 | 0.5 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 6 ～ 25 | 16 ～ 25 | 4 ～ 20 | 2 ～ 20 |
| work material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Aluminum[◎] | Cast Iron[○] | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | - | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] |
| Blade length (ℓ)(mm) | 13 ～ 38 | 12 ～ 60 | 11 ～ 38 | 13 ～ 38 | - | - | - | - | - | - | - | - | - | 4 ～ 11 | 10 ～ 26 | 18 ～ 60 | 8 ～ 38 | 11 ～ 45 | 40 ～ 75 | 2.3 ～ 4.5 | 1 ～ 8 | 17 | 4.5 | 10 | 10 ～ 22 | 4 | 8 | 25 | 19 | 20 ～ 21 | 20 ～ 70 | 0.2 ～ 3 | 0.6 ～ 21 | 0.6 ～ 10 | 2 ～ 32 | 3 ～ 13 | 10 ～ 15 | 1 ～ 40 | 1 ～ 8 | 0.2 ～ 8 | 0.2 ～ 8 | 15 ～ 50 | 36 ～ 54 | 11 ～ 38 | 7 ～ 38 |
| Number of flutes(sheet) | 4 | 5 | 4 | 4 | 2 | 3 | 4 | 3 | 3 | 4 | 2 | 3 | 4 | 3 | 4 | 4 | 3 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 3 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 4 | 4 ～ 5 | 3 ～ 4 | 3 ～ 4 |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | TiAlN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | - | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | TiAlN | Non-Coated | TiCN | TiCN | TiCN |
| Shank diameter (d)(mm) | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 6 ～ 10 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 10 ～ 25 | 4 ～ 6 | 4 | 6 | 6 | 6 | 6 ～ 10 | 4 | 10 | 10 | 8 | 6 | 12 ～ 42 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 16 | 4 ～ 6 | 6 | 4 ～ 6 | 3 | 3 | 3 | 6 ～ 25 | 16 ～ 25 | 6 ～ 20 | 6 ～ 20 |
| Overall Length (L)(mm) | 57 ～ 104 | 65 ～ 126 | 57 ～ 104 | 57 ～ 104 | 50 ～ 92 | 50 ～ 92 | 50 ～ 92 | 35 ～ 75 | 57 ～ 104 | 57 ～ 104 | 75 ～ 150 | 75 ～ 150 | 75 ～ 150 | 57 ～ 72 | 54 ～ 92 | 65 ～ 126 | 57 ～ 104 | 57 ～ 121 | 100 ～ 150 | 45 ～ 50 | 45 | 50 | 50 | 50 | 50 ～ 70 | 45 | 45 | 80 | 70 | 60 | 80 ～ 170 | 50 ～ 60 | 45 ～ 100 | 45 ～ 100 | 45 ～ 100 | 40 ～ 50 | 50 | 50 ～ 80 | 60 | 40 | 50 | 70 ～ 130 | 104 ～ 156 | 57 ～ 125 | 57 ～ 125 |
| Underneck length (ℓ1)(mm) | 21 ～ 54 | 23 ～ 76 | 18 ～ 54 | 21 ～ 54 | - | - | - | - | - | - | - | - | - | 15 ～ 32 | 18 ～ 42 | 29 ～ 76 | 15 ～ 54 | 18 ～ 65 | 50 ～ 94 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 52 ～ 99 | - | - |
| Machining Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Countersinking | Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | - | Plane | Plane | Plane |
| Blade tip shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | - | C plane | - | Sharp Edge | Sharp Edge | - | C plane | Sharp Edge | - | Sharp Edge | Sharp Edge | Sharp Edge | - | - | - | - |
| Torsion Angle (θ) | Variable lead | High Helix (45˚ to 60˚) | Variable lead | Variable lead | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Variable lead | Variable lead | Variable lead | Variable lead | Variable lead | Variable lead | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | - | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
63
-
65
-
67
-
70～70.5
- 70
- 70.5
-
75
-
80
-
83
-
85
-
90
-
100
-
103
-
110
-
120
-
130
-
150
-
200
[4-60/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- NS TOOL (75)
- OSG (73)
- SANDVIK (44)
- GUHRING (38)
- NACHI(FUJIKOSHI) (26)
- DIJET (16)
- OKAZAKI SEIKO (16)
- ASAHI TOOLS (13)
- KYOWA SEIKO (13)
- 7 LEADERS (11)
- KYOCERA (11)
- EIKOSHA (6)
- TOYO DRILL (5)
- ATOM (5)
- THE CUT (3)
- GCT (2)
- SPEED TIGER (2)
- UNION TOOL (2)
- PROCHI (1)
- SANKO MFG (1)
- TAIYO-TOOL (1)
- VAN_HOORN (1)
- WIDIN (1)
CAD data type
-
- 2D
- 3D
Categories related to Square End Mills (Carbide)
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.