Square End Mills (Carbide)（work material：Quenched and tempered steel Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TSC series carbide radius end mill for countersink, 3-flute / short model
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-By leaving the round land width (the width of the cylindrical part without clearance angle at the circumferential groove), it is possible to achieve an effect similar to that of a reamer and improve the surface roughness of the machined surface
-The end cutting edge is almost flat, making it ideal for finishing counterbores.
-The 3-flute shape suppresses chatter that can occur during drilling and counterboring
-Optimal for machining in the low to medium speed range due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness, achieving long life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 53.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
The 2D flute length type with high versatility achieves high-precision processing including grooving- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
Carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC Series Carbide Roughing End Mill for Stainless Steel Machining
MISUMI
Ideal for the medium-finishing of difficult-to-cut SUS, etc.- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Configure nowStarting from∗ ： 81.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
MISUMI
An end mill for titanium machining that performs medium roughing and finish machining at the same time- Volume Discount
- TS
- Titanium
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 104.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 10.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 12.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 10.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 23.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Blade Neck Relief End Mill, 2-Flute / Short Model
MISUMI
A blade relief type that's not affected by the interference of tools- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 7 Days -
Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model
MISUMI
A blade relief type that's not affected by the interference of tools- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 7 Days -
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
MISUMI
[Features]
-Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.- Non-Coated
- General Steel
Configure nowMin. Shipping Days ： 7 Days -
Carbide Blade Neck Relief End Mill, 4-Flute / Short Model
MISUMI
Blade relief type with a 4-flute structure- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 7 Days -
Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model
MISUMI
Blade relief type with a 4-flute structure- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 7 Days -
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 33.17 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Available in MISUMI's extensive blade tip specifications- Volume Discount
Configure nowStarting from∗ ： 25.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)- Volume Discount
Configure nowStarting from∗ ： 45.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra-long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 36.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 39.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-All-purpose blade with regular 2-blade length
-Ultra-fine carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to general purpose helix angle of 30°
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 16.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
GS MILL 4-Flute Blade 4GS
NACHI(FUJIKOSHI)
Supports a wide variety of materials such as green wood and hardened steel. Suited for machining grooves / finishing side surface.- Volume Discount
Configure nowStarting from∗ ： 48.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials. Gash land type flute.- Volume Discount
Configure nowStarting from∗ ： 31.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 22.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 54.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 38.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 4-Flute Blade 3D GSX4C-3D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 38.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL VL 2.5D GSXVL4-2.5D
NACHI(FUJIKOSHI)
It suppresses the chatter that tends to occur at the time of high-speed, high-efficiency machining in the adoption of unequal lead, unequal division.- Volume Discount
Configure nowStarting from∗ ： 100.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X's Mill Geo Long Shank 4GEOLS
NACHI(FUJIKOSHI)
Can perform high precision machining even during deep carving.- Volume Discount
Configure nowStarting from∗ ： 112.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GS MILL 2-Flute Blade 2GS
NACHI(FUJIKOSHI)
Supports a wide variety of materials such as green wood and hardened steel. Suited for finishing work.- Volume Discount
Configure nowStarting from∗ ： 27.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 44.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 2-Flute Blade 3D GSX2C-3D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 37.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 2-Flute Blade 4D GSX2C-4D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 62.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 35.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 78.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X's Mill Geo 4XSGEO
NACHI(FUJIKOSHI)
By grooving enables high feed and high efficiency machining. Supports wide range from mold steel to difficult-to-cut materials.- Volume Discount
Configure nowStarting from∗ ： 90.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
GSX MILL 3-Flute Blade 2D GSX3C-2D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.- Volume Discount
Configure nowStarting from∗ ： 38.80 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
GSX MILL Slot 1.5D GSXSLT-1.5D
NACHI(FUJIKOSHI)
Can go from drilling holes to grooving in continuous high efficiency machining. Well suited for small machines and thin lamenates with weak clamping force.- Volume Discount
Configure nowStarting from∗ ： 63.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X's Mill Geo Slot GEOSLT
NACHI(FUJIKOSHI)
Capable of continuous high-performance drilling of holes and grooving with a wide range of materials, from raw materials to hardened materials.- Volume Discount
Configure nowStarting from∗ ： 100.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials. Gash land type flute.- Volume Discount
Configure nowStarting from∗ ： 22.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated 2-Flute 1.5D Flute Length Type WXL-1.5D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Configure nowStarting from∗ ： 25.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.- Volume Discount
Configure nowStarting from∗ ： 25.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
2-Flute 3D Type WXL-3D-DE
OSG
2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.- Volume Discount
Configure nowStarting from∗ ： 25.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
2-Flute 4D Type WXL-4D-DE
OSG
2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.- Volume Discount
Configure nowStarting from∗ ： 39.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Extra Long, FX-MG-EXDL
OSG
General-purpose 2-flute end-mill super long blade type with heat resistant FX coating.- Volume Discount
Configure nowStarting from∗ ： 67.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 63.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | TSC series carbide radius end mill for countersink, 3-flute / short model | Carbide square end mill, 4-flute / 2D Flute Length (short) model | Carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC Series Carbide Roughing End Mill for Stainless Steel Machining | TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model | XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | ||||||||||||||||||||||||||||||||
| Starting from∗ | 53.95 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 81.46 € *Unit price with basic configuration Volume Discount | 104.92 € *Unit price with basic configuration Volume Discount | 10.21 € *Unit price with basic configuration Volume Discount | 12.86 € *Unit price with basic configuration Volume Discount | 10.30 € *Unit price with basic configuration Volume Discount | 23.92 € *Unit price with basic configuration Volume Discount | - | - | - | - | - | 33.17 € *Unit price with basic configuration Volume Discount | 25.86 € *Unit price with basic configuration Volume Discount | 45.45 € *Unit price with basic configuration Volume Discount | 36.51 € *Unit price with basic configuration Volume Discount | 39.59 € *Unit price with basic configuration Volume Discount | 16.84 € *Unit price with basic configuration Volume Discount | 48.37 € *Unit price with basic configuration Volume Discount | 31.15 € *Unit price with basic configuration Volume Discount | 22.27 € *Unit price with basic configuration Volume Discount | 54.48 € *Unit price with basic configuration Volume Discount | 38.52 € *Unit price with basic configuration Volume Discount | 38.53 € *Unit price with basic configuration Volume Discount | 100.53 € *Unit price with basic configuration Volume Discount | 112.42 € *Unit price with basic configuration Volume Discount | 27.87 € *Unit price with basic configuration Volume Discount | 44.32 € *Unit price with basic configuration Volume Discount | 37.29 € *Unit price with basic configuration Volume Discount | 62.53 € *Unit price with basic configuration Volume Discount | 35.51 € *Unit price with basic configuration Volume Discount | 78.43 € *Unit price with basic configuration Volume Discount | 90.09 € *Unit price with basic configuration Volume Discount | 38.80 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 63.60 € *Unit price with basic configuration Volume Discount | 100.25 € *Unit price with basic configuration Volume Discount | 22.27 € *Unit price with basic configuration Volume Discount | 25.40 € *Unit price with basic configuration Volume Discount | 25.40 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 25.40 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 39.70 € *Unit price with basic configuration Volume Discount | 67.46 € *Unit price with basic configuration | 63.81 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 16 | 1 ～ 20 | 2 ～ 20 | 6 ～ 20 | 6 ～ 20 | 1 ～ 12 | 0.5 ～ 12 | 1.5 ～ 16 | 1 ～ 12 | 6 ～ 12 | 6 ～ 12 | 2 ～ 20 | 6 ～ 12 | 6 ～ 12 | 3.15 ～ 19.99 | 1 ～ 16 | 2 ～ 25 | 1 ～ 20 | 1.5 ～ 25 | 0.3 ～ 20 | 2 ～ 12 | 2 ～ 3.3 | 1 ～ 10 | 1.5 | 1.5 ～ 14 | 2.5 ～ 16 | 6 ～ 13 | 6 | 1 ～ 2.8 | 1.5 ～ 5 | 6 ～ 12 | 6 | 3 ～ 12 | 1 | 2.8 ～ 8 | 4 | 4 ～ 5 | 7 | 1 ～ 20 | 0.1 ～ 12 | 0.1 ～ 30 | 0.1 ～ 20 | 0.2 ～ 12 | 3 | 3 ～ 5 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○/◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] |
| Blade length (ℓ)(mm) | 8 ～ 32 | 2 ～ 40 | 5 ～ 60 | 15 ～ 50 | 14 ～ 42 | 2.5 ～ 30 | 2 ～ 48 | 3.75 ～ 40 | 4 ～ 48 | - | - | 3 ～ 60 | - | - | 3.5 ～ 48 | 2.5 ～ 40 | 4 ～ 50 | 4 ～ 80 | 6 ～ 120 | 0.6 ～ 45 | 5 ～ 26 | 5 ～ 8.3 | 2 ～ 20 | 2.3 | 3.8 ～ 35 | 7.5 ～ 48 | 15 ～ 32.5 | 9 | 2.5 ～ 7 | 2.3 ～ 7.5 | 18 ～ 36 | 24 | 6 ～ 24 | 4 | 8 ～ 19 | 11 | 6 ～ 7.5 | 16 | 1.5 ～ 30 | 0.15 ～ 18 | 0.2 ～ 60 | 0.3 ～ 60 | 0.8 ～ 48 | 20 | 20 ～ 40 |
| Number of flutes(sheet) | 3 | 4 | 4 | 3 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 2 ～ 4 | 4 | 4 | 2 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 4 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Type | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Coating | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | For High Hardness (Silicon Group) / Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | - | - | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated |
| Shank diameter (d)(mm) | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 16 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 3 ～ 16 | 6 ～ 25 | 6 ～ 20 | 4 ～ 25 | 4 ～ 20 | 3 ～ 12 | 4 ～ 6 | 4 ～ 10 | 4 | 4 ～ 16 | 4 ～ 16 | 6 ～ 12 | 6 | 3 ～ 4 | 4 ～ 6 | 6 ～ 12 | 6 | 6 ～ 12 | 4 | 4 ～ 8 | 6 | 6 | 8 | 4 ～ 20 | 4 ～ 12 | 4 ～ 32 | 4 ～ 20 | 4 ～ 12 | 6 | 6 |
| Overall Length (L)(mm) | 50 ～ 110 | 40 ～ 110 | 45 ～ 130 | 60 ～ 130 | 60 ～ 120 | 45 ～ 85 | 45 ～ 100 | 45 ～ 105 | 45 ～ 100 | 45 ～ 75 | 60 ～ 85 | 40 ～ 130 | 45 ～ 75 | 60 ～ 85 | 40 ～ 105 | 40 ～ 120 | 50 ～ 120 | 60 ～ 200 | 60 ～ 250 | 40 ～ 100 | 38 ～ 75 | 40 ～ 45 | 40 ～ 70 | 40 | 40 ～ 90 | 40 ～ 110 | 50 ～ 75 | 60 | 38 ～ 40 | 40 ～ 50 | 50 ～ 90 | 60 | 45 ～ 75 | 40 | 50 ～ 80 | 45 | 45 ～ 50 | 70 | 40 ～ 100 | 45 ～ 75 | 45 ～ 140 | 45 ～ 130 | 45 ～ 100 | 60 | 60 ～ 80 |
| Underneck length (ℓ1)(mm) | - | 17 ～ 73 | 23 ～ 92 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts |
| Blade tip shape | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | C plane | C plane | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | - | - | - | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | With Lead |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Variable lead | - | - | - | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
63
-
65
-
67
-
70～70.5
- 70
- 70.5
-
75
-
80
-
83
-
85
-
90
-
100
-
103
-
110
-
120
-
130
-
150
-
200
[4-60/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- NS TOOL (59)
- OSG (45)
- NACHI(FUJIKOSHI) (20)
- OKAZAKI SEIKO (14)
- ASAHI TOOLS (12)
- KYOCERA (11)
- KYOWA SEIKO (8)
- SANDVIK (8)
- ATOM (5)
- THE CUT (5)
- TOYO DRILL (4)
- 7 LEADERS (2)
- GCT (2)
- SPEED TIGER (2)
- UNION TOOL (2)
- DIJET (1)
- PROCHI (1)
- SANKO MFG (1)
- WIDIN (1)
- VAN_HOORN (0)
- TAIYO-TOOL (0)
- GUHRING (0)
- EIKOSHA (0)
CAD data type
-
- 2D
- 3D
Categories related to Square End Mills (Carbide)
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.