Square HSS End Mills（Base Blade Y/N：Available）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
AS Coated High-Speed Steel Square End Mill, 4-Flute / Long
MISUMI
[Features]
-Suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 26.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
αFS α Flat Nick Roughing Short Blade
SANKO MFG
A flat nick type roughing end mill. Semi-finishing is possible.Configure nowStarting from∗ ： 77.36 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model
MISUMI
[Features]
-Uncoated long flute 2 flute type of high speed steel powder square which can expect for durability
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Configure nowStarting from∗ ： 23.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
3S End Mill, 4-Flute Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy- Volume Discount
Configure nowStarting from∗ ： 48.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
[Features]
-High-speed steel powder square regular blade length 2-flute type, which can expect for durability
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Configure nowStarting from∗ ： 28.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
MISUMI
[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 7 Days -
- Promotional pricing ends 31/12/2024
3S End Mill, 2-Flute Extra Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes- Volume Discount
Configure nowStarting from∗ ： 43.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
3S End Mill, 4-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy- Volume Discount
Configure nowStarting from∗ ： 48.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
AL1T for 1-Flute Aluminum Sash
SANKO MFG
An end mill for machining aluminium wings.
Tool material: Cobalt high-speed steel, Working material: Aluminium
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of cutting edges (pcs.): 1
Rotation angle: Standard helix (30 to 44°).Configure nowStarting from∗ ： 46.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 48.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 54.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 72.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 59.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 45.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 54.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 71.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 56.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 31.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 41.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-High-speed steel powder roughing type with long flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 57.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-Long shank of high-speed steel powder expected to last a long time
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 54.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 30.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 39.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-High-speed steel roughing cutter that offers both good machining performance and reasonable price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 47.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 43.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
MISUMI
[Features]
-Uncoated short flutes of high-speed steel powder expected to last a long time
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 39.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]
-High speed steel powder roughers uncoated with normal flute length, expecting long life
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 50.19 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
MISUMI
[Features]
-High speed steel powder roughing, uncoated, with long flute length expected to last a long time
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 71.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
MISUMI
[Features]
-Uncoated long shank blade made of high-speed steel powder for roughing, which can be expected to have a long service life
-Suitable for milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 51.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
MISUMI
[Features]
-High-speed steel roughing, uncoated, short flute length with optimum pitch width for rough finishing
-Can be reground. Please refer to the "Regrinding Service" page for details of how to proceed, what services you can take advantage of, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 22.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]
-High-speed steel roughing cutter without coating with regular flute length and optimum pitch width for roughing
-Can be reground. Please refer to the "Regrinding Service" page to find out how to proceed, what services you can take advantage of, what the prices are, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 31.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
MISUMI
[Features]
-High speed steel roughing cutter with uncoated long flute with optimum pitch width for roughing
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 38.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
MISUMI
[Features]
-High speed steel roughing cutter with uncoated long shank and optimum pitch width for rough finishing
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 39.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
-Short flute high-speed steel roughing cutter with standard TiAlN coating
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- S (Short)
Configure nowStarting from∗ ： 27.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
MISUMI
[Features]
-High-spiral design with excellent machinability, therefore suitable for a wide range of applications from heavy machining to finishing
-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 35.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short
MISUMI
[Features]
-High flute design with excellent machinability, so it can be used for a wide range of applications from heavy machining to fine cutting
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 37.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
MISUMI
[Features]
-The cutting force is reduced as the notches on the peripheral edge dissipate chips
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
MISUMI
[Features]
-The cutting force is reduced as the notches on the peripheral edge divert chips
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]
-High speed steel powder square short blade length 2-flute type, which can expect for durability
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- AS
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 27.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long
MISUMI
[Features]
-High-speed steel powder with square long blade length, which is expected to last long
-Suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 2 Flutes
- L (Long)
Configure nowStarting from∗ ： 31.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 29.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
[Features]
-Achieves high resistance in a variety of materials, from raw materials to heat-treated steel
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 31.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long
MISUMI
[Features]
-Achieves high resistance in a wide range of materials, from raw materials to heat-treated steel
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 33.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
[Features]
-High-speed steel powder for roughing with short flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 23.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular
MISUMI
[Features]
-High speed steel powder for roughing with regular flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 2 Flutes
- R (Regular)
Configure nowStarting from∗ ： 25.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| work material |
| Blade shape type |
| Number of flutes(sheet) |
| Tool Material Type |
| Machining Application |
| Shank diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | SANKO MFG | MISUMI | FUKUDA | MISUMI | MISUMI | FUKUDA | FUKUDA | SANKO MFG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model | High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Long | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular | ||||||||
| Starting from∗ | 26.77 € *Unit price with basic configuration Volume Discount | 77.36 € *Unit price with basic configuration | 23.76 € *Unit price with basic configuration Volume Discount | 48.94 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 28.54 € *Unit price with basic configuration Volume Discount | - | 43.96 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 48.94 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 46.41 € *Unit price with basic configuration | 48.41 € *Unit price with basic configuration Volume Discount | 54.30 € *Unit price with basic configuration Volume Discount | 72.57 € *Unit price with basic configuration Volume Discount | 59.65 € *Unit price with basic configuration Volume Discount | 45.93 € *Unit price with basic configuration Volume Discount | 54.00 € *Unit price with basic configuration Volume Discount | 71.66 € *Unit price with basic configuration Volume Discount | 56.26 € *Unit price with basic configuration Volume Discount | 31.02 € *Unit price with basic configuration Volume Discount | 41.08 € *Unit price with basic configuration Volume Discount | 57.44 € *Unit price with basic configuration Volume Discount | 54.64 € *Unit price with basic configuration Volume Discount | 30.95 € *Unit price with basic configuration Volume Discount | 39.21 € *Unit price with basic configuration Volume Discount | 47.64 € *Unit price with basic configuration Volume Discount | 43.81 € *Unit price with basic configuration Volume Discount | 39.37 € *Unit price with basic configuration Volume Discount | 50.19 € *Unit price with basic configuration Volume Discount | 71.06 € *Unit price with basic configuration Volume Discount | 51.11 € *Unit price with basic configuration Volume Discount | 22.70 € *Unit price with basic configuration Volume Discount | 31.31 € *Unit price with basic configuration Volume Discount | 38.68 € *Unit price with basic configuration Volume Discount | 39.29 € *Unit price with basic configuration Volume Discount | 27.97 € *Unit price with basic configuration Volume Discount | 35.08 € *Unit price with basic configuration Volume Discount | 37.99 € *Unit price with basic configuration Volume Discount | 46.01 € *Unit price with basic configuration Volume Discount | 46.26 € *Unit price with basic configuration Volume Discount | 27.51 € *Unit price with basic configuration Volume Discount | 31.08 € *Unit price with basic configuration Volume Discount | 29.26 € *Unit price with basic configuration Volume Discount | 31.38 € *Unit price with basic configuration Volume Discount | 33.05 € *Unit price with basic configuration Volume Discount | 23.33 € *Unit price with basic configuration Volume Discount | 25.29 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 8 Days | 5 Days | Same day | 5 Days | 7 Days | Same day | Same day | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| Blade diameter (D)(φ) | 3 ～ 40 | 10 ～ 50 | 3 ～ 25 | 3 ～ 50 | 1 ～ 25 | 2.7 ～ 24.99 | 0.8 ～ 60 | 3 ～ 60 | 6 ～ 12 | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 32 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 6 ～ 32 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 30 | 6 ～ 30 | 10 ～ 25 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 30 | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 1 ～ 40 | 3 ～ 20 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 40 | 1 ～ 25 |
| Blade length (ℓ)(mm) | 15 ～ 110 | 25 ～ 80 | 15 ～ 90 | 20 ～ 125 | 3.5 ～ 60 | 10 ～ 60 | 2.5 ～ 300 | 30 ～ 300 | 18 ～ 45 | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 45 | 15 ～ 50 | 15 ～ 50 | 15 ～ 45 | 15 ～ 45 | 2.5 ～ 65 | 15 ～ 75 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 65 | 3.5 ～ 60 |
| work material | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Aluminum[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] |
| Blade shape type | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of flutes(sheet) | 4 | 4 ～ 6 | 2 | 4 | 2 | 2 | 2 | 4 | 1 | 3 ～ 5 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 5 | 3 ～ 5 | 4 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 6 | 3 | 4 | 3 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 2 |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Alloy HSS | Powder high-speed steel | Cobalt HSS | Alloy HSS | Alloy HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel |
| Machining Application | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove | Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking |
| Shank diameter (d)(mm) | 6 ～ 32 | 10 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 8 ～ 12 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 20 | 8 ～ 20 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 |
| Coating | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | TiCN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN |
| Overall Length (L)(mm) | 60 ～ 195 | 90 ～ 200 | 60 ～ 160 | 58 ～ 220 | 45 ～ 130 | 50 ～ 130 | 42 ～ 400 | 70 ～ 400 | 80 ～ 100 | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 121 | 65 ～ 140 | 65 ～ 140 | 65 ～ 125 | 65 ～ 125 | 45 ～ 150 | 60 ～ 140 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 150 | 45 ～ 130 |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | 28 ～ 66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
work material
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Number of flutes(sheet)
-
Tool Material Type
-
Machining Application
-
Shank diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Underneck length (ℓ1)(mm)
-
shank
Brand
-
- SANKO MFG (52)
- FUKUDA (16)
- ASAHI TOOLS (4)
- EIKOSHA (3)
- NACHI(FUJIKOSHI) (3)
- OSG (1)
- ESCO (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
CAD data type
-
- 2D
- 3D
Categories related to Square HSS End Mills
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.