Cutting Bits (Compatible Bit: 02-2)
A tool bit is a tool for cutting such as a lathe. Applications vary depending on the product, such as outer diameter cutting, inner diameter cutting, cut-off, parting off, etc. By grinding the cutting edge according to the processing purpose, complicated shapes can be processed. There are types such as completed (Muku) tool bits, high-speed brazing tool bits, and stick tool bits, etc. The finished (bar) tool bit has the same material as the cutting edge and shank. This is a tool bit that has a square cross section and is used after molding the cutting edge. The high speed brazing tool bit has a shank and a blade that are brazed and integrated. The cutting edge material is high-speed steel (high-speed steel), which can be used for low-speed or intermittent machining. The stick has a trapezoidal cross section and is suitable for parting off, cut-off, etc. High speed steel is the main material, and a holder is required for use.
2 articol(e)
* Informații privind zile de expediere, costurile de expediere și prețurile
| Producător |
|---|
| Numele gamei |
| Preț (fără TVA) |
|---|
| Dată de expediere normală |
| JIS Standard |
| Product Type |
| Width(mm) |
| Material |
| Overall Length(mm) |
| Height(mm) |
| Compatible Bit |
 |
 |
HICUT | HICUT |
27.59 €- | 34.81 € |
| 5 zile lucrătoare | 13 zile lucrătoare |
| Type 41 twin tool (Right) ～ Type 42 twin tool (Left) | 20 Type Flat Bit |
| Carbide bit | Carbide bit |
| 16 | 16 |
| HT103 ～ UT140 | HT103 ～ UT140 |
| 120 | 120 |
| 16 | 16 |
| 02-2 | 02-2 |