Înregistrați-vă
Criterii de filtrare

Ștergeți tot

  • Stoc
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • Shank Type
  • Coating Y/N
  • Drill Bits

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Stub Model for Stainless Steel / Soft Steels, EX-SUS-GDS
      • DISCOUNT
      • Volume Discount

      OSG

      Stub Model for Stainless Steel / Soft Steels, EX-SUS-GDS

      [Features] A drill bit with an overall length of 38 mm to 170 mm.[Features] Can be used for stainless steel, mild steel, copper alloys, etc.
      Citiți mai mult
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.5 ~ 323 ~ 90General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS38 ~ 170End Mill Shank / Straight ShankAvailableTiNN/A
      Preț normal (fără TVA):
      11.10 €
      Preț normal (fără TVA):
      Preț special
      Dată de expediere normală:
      Articol în stoc: 1 zi lucrătoare
      Unele articole pot fi expediate în aceeași zi
      Configurare
    • SANDVIK Trepanning Tool

        SANDVIK

        SANDVIK Trepanning Tool

        [Specifications]・Grade: Indexable insert included・Drill type: Indexable insert drill・eClass-5.1: 21010103For trepanning operations Excellent reliability in unstable applications and lathe applications Internal coolant supply Stack drilling cartridges available.
        Citiți mai mult
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        60 ~ 110-General Steel[○] / Stainless Steel[○] / Cast Iron[○]------
        Preț normal (fără TVA):
        1,603.31 €
        Dată de expediere normală:
        5 zile lucrătoare
        Configurare
      • Hard Cut Drill

          SANDVIK

          Hard Cut Drill

          Broken socket strip removal toolIt removes broken socket strips with a strong cutting edge.
          Citiți mai mult
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          2 ~ 6---30 ~ 60Straight Shank--N/A
          Preț normal (fără TVA):
          53.14 €
          Dată de expediere normală:
          6 zile lucrătoare
          Configurare
        • Gun Drill 50 X D EB100 5647

            GUHRING

            Gun Drill 50 X D EB100 5647

            A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.
            Citiți mai mult
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2.5 ~ 8155 ~ 440-Carbide185 ~ 485-AvailableOtherAvailable
            Preț normal (fără TVA):
            334.25 €
            Dată de expediere normală:
            24 zile lucrătoare
            Configurare
          • Solid Carbide Drill 2D Type AD-2D
            • Volume Discount

            OSG

            Solid Carbide Drill 2D Type AD-2D

            [Features]· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
            Citiți mai mult
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2 ~ 1214 ~ 55General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide62 ~ 102End Mill ShankAvailableOtherN/A
            Preț normal (fără TVA):
            37.21 €
            Dată de expediere normală:
            6 zile lucrătoare
            Configurare
          • SANDVIK CoroDrill 870 Exchangeable Tip Drill

              SANDVIK

              SANDVIK CoroDrill 870 Exchangeable Tip Drill

              [Specifications]・eClass-5.1: 21010103[Features]・Secure and reliable cutting process・High penetration rates and excellent hole quality・Long, predictable tool life and high productivity・Low cost per hole・Internal coolant・Easy handling and secure tip changes・Optimized chip control and evacuation・Tailor Made options available for tool body and tips
              Citiți mai mult
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              10.00 - 10.49 ~ 31.00 - 33.00-General Steel[○] / Stainless Steel[○] / Cast Iron[○]------
              Preț normal (fără TVA):
              356.62 €
              Dată de expediere normală:
              5 zile lucrătoare
              Configurare
            • For Broken Tap Removal EX-H-DRL
              • Volume Discount

              OSG

              For Broken Tap Removal EX-H-DRL

              Used for removing broken taps, drilling of hardened steel (58 ~ 68HRC), stellite, etc.
              Citiți mai mult
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 1210 ~ 60High Hardness Steel[◎]Carbide30 ~ 110End Mill Shank / Straight ShankN/ANon-CoatedN/A
              Preț normal (fără TVA):
              41.10 €
              Dată de expediere normală:
              6 zile lucrătoare
              Configurare
            • Magic Drill DRA Type Tip

                KYOCERA

                Magic Drill DRA Type Tip

                It is an insert for MagicDrill DRA type that has high centripetal force with a special 2-step tip angle and achieves excellent cylindricity, roundness and surface roughness in steel machining.
                Citiți mai mult
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                9 ~ 25-General Steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]---Available--
                Preț normal (fără TVA):
                82.29 €
                Dată de expediere normală:
                6 zile lucrătoare
                Configurare
              • SANDVIK CoroDrill 880 Indexable Insert Drill

                  SANDVIK

                  SANDVIK CoroDrill 880 Indexable Insert Drill

                  [Specifications]・Drill type: Indexable insert drill・eClass-5.1: 21010103[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool life
                  Citiți mai mult
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  12 ~ 84212.77 ~ 339.15General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]-295 ~ 404----
                  Preț normal (fără TVA):
                  613.85 €
                  Dată de expediere normală:
                  5 zile lucrătoare
                  Configurare
                • SG-ESS Drill SGESS
                  • DISCOUNT
                  • Volume Discount

                  NACHI(FUJIKOSHI)

                  SG-ESS Drill SGESS

                  Provides high-speed, high-efficiency machining, and high precision drilling from steel and stainless steel, to aluminum.
                  Citiți mai mult
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1.01 ~ 19.56 ~ 94General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]High-speed steel38 ~ 168End Mill Shank / Straight ShankAvailableTiCNN/A
                  Preț normal (fără TVA):
                  9.27 €
                  Preț normal (fără TVA):
                  Preț special
                  Dată de expediere normală:
                  Articol în stoc: 1 zi lucrătoare
                  Unele articole pot fi expediate în aceeași zi
                  Configurare
                • Regular Model for Stainless Steel / Soft Steels, EX-SUS-GDR
                  • DISCOUNT
                  • Volume Discount

                  OSG

                  Regular Model for Stainless Steel / Soft Steels, EX-SUS-GDR

                  A standard lineup of long flute end mill drills suited for machining of stainless steel, mild steel, aluminum alloy, and cupper alloy
                  Citiți mai mult
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 3224 ~ 165General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS56 ~ 245End Mill Shank / Straight ShankAvailableTiNN/A
                  Preț normal (fără TVA):
                  13.40 €
                  Preț normal (fără TVA):
                  Preț special
                  Dată de expediere normală:
                  Articol în stoc: 1 zi lucrătoare
                  Unele articole pot fi expediate în aceeași zi
                  Configurare
                • C-UMD Iron and Steel Drill, Unimax Drill
                  • Volume Discount

                  UNION TOOL

                  C-UMD Iron and Steel Drill, Unimax Drill

                  [Features] -UT micro-coating.Tip angle 150-Tool material: carbide.
                  Citiți mai mult
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.11 ~ 2.851.2 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableOtherN/A
                  Preț normal (fără TVA):
                  20.19 €
                  Dată de expediere normală:
                  6 zile lucrătoare
                  Configurare
                • Hi-Spec Micro Drill
                  • DISCOUNT
                  • Volume Discount

                  ATOM

                  Hi-Spec Micro Drill

                  The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
                  Citiți mai mult
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.035 ~ 1.9950.4 ~ 22General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                  Preț normal (fără TVA):
                  42.56 €
                  Preț normal (fără TVA):
                  Preț special
                  Dată de expediere normală:
                  Articol în stoc: 1 zi lucrătoare
                  Unele articole pot fi expediate în aceeași zi
                  Configurare
                • Super U Drill - Cylindrical Shank

                    SANDVIK

                    Super U Drill - Cylindrical Shank

                    With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.
                    Citiți mai mult
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    12.5 ~ 6328 ~ 220General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]-91 ~ 331End Mill Shank / Straight Shank--N/A
                    Preț normal (fără TVA):
                    616.76 €
                    Dată de expediere normală:
                    6 zile lucrătoare
                    Configurare
                  • HYP-HP-5D, Carbide drill with  WDI coating, up to 5xD

                      OSG

                      HYP-HP-5D, Carbide drill with WDI coating, up to 5xD

                      Carbide drill with WDI coating, up to 5xD - General purpose
                      Citiți mai mult
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      ---------
                      Preț normal (fără TVA):
                      24.50 €
                      Dată de expediere normală:
                      2 zile lucrătoare
                      Configurare
                    • HYP-HPO-5D-HE, Carbide drill with internal coolant, WDI coating, up to 5xD

                        OSG

                        HYP-HPO-5D-HE, Carbide drill with internal coolant, WDI coating, up to 5xD

                        Carbide drill with internal coolant, WDI coating, up to 5xD - With Whistle Notch shank for general purpose
                        Citiți mai mult
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        ---------
                        Preț normal (fără TVA):
                        60.90 €
                        Dată de expediere normală:
                        2 zile lucrătoare
                        Configurare
                      • SANDVIK Coromant U Insert for Drilling

                          SANDVIK

                          SANDVIK Coromant U Insert for Drilling

                          [Specifications]・Insert clearance angle: 7°・Grade type: Hard metal・eClass-5.1: 21011901
                          Citiți mai mult
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          --General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
                          Preț normal (fără TVA):
                          21.38 €
                          Dată de expediere normală:
                          5 zile lucrătoare
                          Configurare
                        • TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
                          • Volume Discount

                          MISUMI

                          TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

                          [Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
                          Citiți mai mult
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.38 ~ 2.76 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide38End Mill ShankAvailableTiAlNN/A
                          Preț normal (fără TVA):
                          38.08 €
                          Dată de expediere normală:
                          5 zile lucrătoare
                          Configurare
                        • Micro Drill Standard Tip Length
                          • DISCOUNT
                          • Volume Discount

                          ATOM

                          Micro Drill Standard Tip Length

                          A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
                          Citiți mai mult
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.02 ~ 30.2 ~ 25General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                          Preț normal (fără TVA):
                          28.41 €
                          Preț normal (fără TVA):
                          Preț special
                          Dată de expediere normală:
                          Articol în stoc: 1 zi lucrătoare
                          Unele articole pot fi expediate în aceeași zi
                          Configurare
                        • Tapered Shank Drill, Regular Type N 245
                          • Volume Discount

                          GUHRING

                          Tapered Shank Drill, Regular Type N 245

                          Versatile drill for general applications.
                          Citiți mai mult
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          2.4 ~ 9630 ~ 280General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]High-speed steel111 ~ 534Taper shankAvailableOtherN/A
                          Preț normal (fără TVA):
                          46.33 €
                          Dată de expediere normală:
                          6 zile lucrătoare
                          Configurare
                        • Micro Drill, 7 X D, Type-N 6401

                            GUHRING

                            Micro Drill, 7 X D, Type-N 6401

                            Improves chip disposal by increasing groove width, allowing stable small diameter hole milling.
                            Citiți mai mult
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.8 ~ 36.4 ~ 27General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Carbide47 ~ 67-AvailableOtherN/A
                            Preț normal (fără TVA):
                            106.39 €
                            Dată de expediere normală:
                            6 zile lucrătoare
                            Configurare
                          • Straight Long Drill
                            • Volume Discount

                            TWININGS

                            Straight Long Drill

                            As it is made of HSS material, it has high hardness and can be used for deep hole drilling at high speed.
                            Citiți mai mult
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.45 ~ 7.0510 ~ 90-High-speed steel75 ~ 200-N/ANon-CoatedN/A
                            Preț normal (fără TVA):
                            11.20 €
                            Dată de expediere normală:
                            8 zile lucrătoare
                            Configurare
                          • Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
                            • Volume Discount

                            OSG

                            Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D

                            [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
                            Citiți mai mult
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 2018 ~ 140General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]Carbide70 ~ 205End Mill Shank / Straight ShankAvailableOtherAvailable
                            Preț normal (fără TVA):
                            85.18 €
                            Dată de expediere normală:
                            6 zile lucrătoare
                            Configurare
                          • HYP-HPO-8D, Carbide drill with internal coolant, WDI coating, up to 8xD

                              OSG

                              HYP-HPO-8D, Carbide drill with internal coolant, WDI coating, up to 8xD

                              Carbide drill with internal coolant, WDI coating, up to 8xD - General purpose
                              Citiți mai mult
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              ---------
                              Preț normal (fără TVA):
                              85.50 €
                              Dată de expediere normală:
                              2 zile lucrătoare
                              Configurare
                            • SANDVIK CoroDrill 860 Solid Carbide Drill

                                SANDVIK

                                SANDVIK CoroDrill 860 Solid Carbide Drill

                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                3 ~ 20-General Steel[○] / Stainless Steel[○] / Aluminum[○]-62 ~ 257----
                                Preț normal (fără TVA):
                                128.77 €
                                Dată de expediere normală:
                                5 zile lucrătoare
                                Configurare
                              • Carbide Stub Type for High Hardness Steel FH-GDS

                                  OSG

                                  Carbide Stub Type for High Hardness Steel FH-GDS

                                  Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.
                                  Citiți mai mult
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.3 ~ 21.6 ~ 12Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide38 ~ 46End Mill ShankAvailableOtherAvailable
                                  Preț normal (fără TVA):
                                  52.37 €
                                  Dată de expediere normală:
                                  6 zile lucrătoare
                                  Configurare
                                • TAF Drill

                                    MITSUBISHI MATERIALS

                                    TAF Drill

                                    A blade tip replacement type carbide insert drill.[Features]· Economical insert that uses four corners.· Grade and breaker combination can support a wide range of cut materials.· High rigidity holder.[Applications]· High-efficiency machining for large diameter sizes.
                                    Citiți mai mult
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    12 ~ 5529 ~ 185General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎]Carbide82 ~ 265End Mill Shank / Straight ShankN/A-Available
                                    Preț normal (fără TVA):
                                    299.10 €
                                    Dată de expediere normală:
                                    8 zile lucrătoare
                                    Configurare
                                  • Carbide Drill Carbide for High Hardness Steel (From 70HRC)
                                    • Volume Discount

                                    OSG

                                    Carbide Drill Carbide for High Hardness Steel (From 70HRC)

                                    Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.
                                    Citiți mai mult
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    2 ~ 1212 ~ 76High Hardness Steel[◎]Carbide42 ~ 120End Mill Shank / Straight ShankAvailableOtherN/A
                                    Preț normal (fără TVA):
                                    102.10 €
                                    Dată de expediere normală:
                                    6 zile lucrătoare
                                    Configurare
                                  • Micro Drill "NEO PRO" Short Blades
                                    • DISCOUNT
                                    • Volume Discount

                                    ATOM

                                    Micro Drill "NEO PRO" Short Blades

                                    A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                                    Citiți mai mult
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.1 ~ 2.990.6 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                                    Preț normal (fără TVA):
                                    35.70 €
                                    Preț normal (fără TVA):
                                    Preț special
                                    Dată de expediere normală:
                                    Articol în stoc: 1 zi lucrătoare
                                    Unele articole pot fi expediate în aceeași zi
                                    Configurare
                                  • Straight Shank Drill, Regular Type GU500DZ 5523
                                    • DISCOUNT
                                    • Volume Discount

                                    GUHRING

                                    Straight Shank Drill, Regular Type GU500DZ 5523

                                    Cobalt high-speed steel drill for general drilling applications.
                                    Citiți mai mult
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    2.3 ~ 10.427 ~ 87-Cobalt HSS53 ~ 133Straight ShankN/A-N/A
                                    Preț normal (fără TVA):
                                    6.97 €
                                    Preț normal (fără TVA):
                                    Preț special
                                    Dată de expediere normală:
                                    Articol în stoc: 1 zi lucrătoare
                                    Unele articole pot fi expediate în aceeași zi
                                    Configurare
                                  • Micro Drill, Type-N 3899
                                    • Volume Discount

                                    GUHRING

                                    Micro Drill, Type-N 3899

                                    Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
                                    Citiți mai mult
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.1 ~ 31.2 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Carbide38-AvailableTiAlNN/A
                                    Preț normal (fără TVA):
                                    57.16 €
                                    Dată de expediere normală:
                                    6 zile lucrătoare
                                    Configurare
                                  • Super U Drill - Hole Drilling Tip

                                      SANDVIK

                                      Super U Drill - Hole Drilling Tip

                                      Ideal for machining requiring deep cutting and a highly rigid tip
                                      Citiți mai mult
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      14~16 ~ 53~63-General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
                                      Preț normal (fără TVA):
                                      29.24 €
                                      Dată de expediere normală:
                                      6 zile lucrătoare
                                      Configurare
                                    • Sandvik Super U Drill - Cylindrical Shank

                                        SANDVIK

                                        Sandvik Super U Drill - Cylindrical Shank

                                        [Features]· A Super U Drill.· Perfectly balanced cutting which engages the edge in steps improves hole drilling accuracy and table feed up to 200%.· Excellent roughness of machined surfaces can be realized by applying a wiper tip.[Applications]· For drilling of any workpiece.· Supports both drill rotation and workpiece rotation.
                                        Citiți mai mult
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        ---------
                                        Preț normal (fără TVA):
                                        782.91 €
                                        Dată de expediere normală:
                                        6 zile lucrătoare
                                        Configurare
                                      • Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                          OSG

                                          Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                          [Features]· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                          Citiți mai mult
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          3 ~ 1333 ~ 143General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide80 ~ 206End Mill ShankAvailableOtherAvailable
                                          Preț normal (fără TVA):
                                          89.32 €
                                          Dată de expediere normală:
                                          6 zile lucrătoare
                                          Configurare
                                        • EX-SUS-GDS, HSSE drill with TIN coating, up to 3xD

                                            OSG

                                            EX-SUS-GDS, HSSE drill with TIN coating, up to 3xD

                                            HSSE drill with TIN coating, up to 3xD - For stainless steel, low carbon steel and cast aluminum
                                            Citiți mai mult
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            ---------
                                            Preț normal (fără TVA):
                                            87.20 €
                                            Dată de expediere normală:
                                            2 zile lucrătoare
                                            Configurare
                                          • Universal drill bit set
                                            • Volume Discount

                                            METABO

                                            Universal drill bit set

                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            ---------
                                            Preț normal (fără TVA):
                                            2.91 €
                                            Dată de expediere normală:
                                            7 zile lucrătoare
                                            Configurare
                                          • TiAlN Coated Carbide Drill, Regular
                                            • Volume Discount

                                            MISUMI

                                            TiAlN Coated Carbide Drill, Regular

                                            [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.
                                            Citiți mai mult
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            0.3 ~ 133 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]Carbide38 ~ 124End Mill ShankAvailableTiAlNN/A
                                            Preț normal (fără TVA):
                                            24.74 €
                                            Dată de expediere normală:
                                            5 zile lucrătoare
                                            Configurare
                                          • Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

                                              MISUMI

                                              Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

                                              [Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.
                                              Citiți mai mult
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-Straight ShankN/A-N/A
                                              Dată de expediere normală:
                                              12 zile lucrătoare
                                              Configurare
                                            • TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular
                                              • Volume Discount

                                              MISUMI

                                              TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1 până la 10 bucăți】

                                              [Features] -Demonstrates one of the best cutting performances for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip evacuation-X-shaped thinning provides a good bevel and reduces pressure load significantly.
                                              Citiți mai mult
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              2 ~ 1324 ~ 101General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS49 ~ 151Straight ShankAvailableTiNN/A
                                              Preț normal (fără TVA):
                                              8.17 €
                                              Dată de expediere normală:
                                              5 zile lucrătoare
                                              Configurare
                                            • High-Speed Steel Drill, Straight Shank / Regular
                                              • Volume Discount

                                              MISUMI

                                              High-Speed Steel Drill, Straight Shank / Regular【5 până la 10 bucăți】

                                              [Features] Listing of frequently used sizes-Two-shank drills with general high-speed steel steam-oxide treatment.
                                              Citiți mai mult
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              1 ~ 1312 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel34 ~ 151Straight ShankN/A-N/A
                                              Preț normal (fără TVA):
                                              9.01 €
                                              Dată de expediere normală:
                                              5 zile lucrătoare
                                              Configurare
                                            • Cobalt Tapered Shank Drill COTD
                                              • Volume Discount

                                              NACHI(FUJIKOSHI)

                                              Cobalt Tapered Shank Drill COTD

                                              It si a general-purpose cobalt drill, for machining of workpiece materials from carbon steel and stainless steel to aluminum.
                                              Citiți mai mult
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              7.1 ~ 4078 ~ 220General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS158 ~ 365Taper shankN/A--
                                              Preț normal (fără TVA):
                                              65.92 €
                                              Dată de expediere normală:
                                              6 zile lucrătoare
                                              Configurare
                                            • Aqua Drill EX Flat AQDEXZ

                                                NACHI(FUJIKOSHI)

                                                Aqua Drill EX Flat AQDEXZ

                                                Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.
                                                Citiți mai mult
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                0.5 ~ 15.81.65 ~ 72General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide47 ~ 115End Mill Shank / Straight ShankAvailableOtherN/A
                                                Preț normal (fără TVA):
                                                88.05 €
                                                Dată de expediere normală:
                                                5 zile lucrătoare
                                                Configurare
                                              • MSE Miracle MINI STAR DRILL
                                                • Volume Discount

                                                MITSUBISHI MATERIALS

                                                MSE Miracle MINI STAR DRILL

                                                Ultra-small diameter carbide solid drill.[Features]· Tool shape with attention to machining stability (wide margin width and shallow circumferential relief).· Stable ultra small diameter machining is enabled with large groove width with excellent chip discharge performance.[Applications]· Supports drilling small holes starting from φ0.1 (diameter 0.1 mm).
                                                Citiți mai mult
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                0.1 ~ 0.991.2 ~ 10General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]Carbide38End Mill ShankAvailableTiNN/A
                                                Preț normal (fără TVA):
                                                37.38 €
                                                Dată de expediere normală:
                                                6 zile lucrătoare
                                                Configurare
                                              • Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
                                                • Volume Discount

                                                OSG

                                                Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)

                                                Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications
                                                Citiți mai mult
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                3.3 ~ 1232 ~ 96Quenched and tempered steel[◎] / High Hardness Steel[◎]Carbide78 ~ 156End Mill Shank / Straight ShankAvailableOtherAvailable
                                                Preț normal (fără TVA):
                                                159.00 €
                                                Dată de expediere normală:
                                                6 zile lucrătoare
                                                Configurare
                                              • Toglon Hard Drill Regular ALT Coating
                                                • DISCOUNT
                                                • Volume Discount

                                                IWATA TOOL

                                                Toglon Hard Drill Regular ALT Coating

                                                · 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
                                                Citiți mai mult
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                1 ~ 66 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide50 ~ 120End Mill ShankAvailableTiAlNN/A
                                                Preț normal (fără TVA):
                                                89.60 €
                                                Preț normal (fără TVA):
                                                Preț special
                                                Dată de expediere normală:
                                                Articol în stoc: 1 zi lucrătoare
                                                Unele articole pot fi expediate în aceeași zi
                                                Configurare