Drill Bits（Coating Y/N：Available Page 2）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1-10 Pieces Per Package】
MISUMI
[Features]
-Demonstrates one of the best cutting performances for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials
-High spiral shape promotes chip evacuation
-X-shaped thinning provides a good bevel and reduces pressure load significantly.- Volume Discount
Configure nowStarting from∗ ： 8.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Aqua Drill Regular AQDR
NACHI(FUJIKOSHI)
Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.- Volume Discount
Configure nowStarting from∗ ： 87.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DLC HSS Drill DLCHD
NACHI(FUJIKOSHI)
High efficiency processing of aluminum alloy is possible.- Volume Discount
Configure nowStarting from∗ ： 9.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG-ES Drill SGES
NACHI(FUJIKOSHI)
Performs high-speed, high-efficiency machining of steel, mold steel and aluminum. It can not be used for austenitic stainless steel.- Volume Discount
Configure nowStarting from∗ ： 15.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond-Coated Super Hard D-GDN
OSG
Excellent power of course against aluminum alloys, but especially against high silicon aluminum alloys for a extremely short-life carbide drillConfigure nowStarting from∗ ： 94.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D
OSG
UVM ultra-small diameter drill, type 5D, for holes with a minimum diameter of ø0.02.Configure nowStarting from∗ ： 91.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Medium Type for General Machining EX-GDN
OSG
Have flute length that comes in middle of stub and regular; capable of non-stop, high-speed machining for up to four times small diameters.- Volume Discount
Configure nowStarting from∗ ： 9.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Powder HSS for Tool Steel Stub Type VPH-GDS
OSG
Exhibits High Cost Performance for 40-50 HRC Heat-Treated Steel Processing- Volume Discount
Configure nowStarting from∗ ： 10.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
UTDLX UT Micro Coat, Unimax Drill, Long Blade
UNION TOOL
[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.Configure nowStarting from∗ ： 35.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
VAPDM Violet High Precision Drill (M)
MITSUBISHI MATERIALS
High precision HSS drill (middle type hole depth guideline: 5 times drill diameter or less).
[Features]
· End mill shank drill (high-speed steel) with excellent abrasion resistance and long life.
· Capable of high-efficiency drilling.
· Reduces oversizing of machined holes and provides excellent pitch accuracy.
[Applications]
· High speed, high efficiency machining of steel and cast iron, etc.- Volume Discount
Configure nowStarting from∗ ： 16.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
NSMD Micro Drills
NS TOOL
Realizes standardization from tip diameter φ 0.01. Pioneering a New Area for Hole Drilling with Drills- Volume Discount
Configure nowStarting from∗ ： 50.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
NSMD-M MUGEN Micro Coating Micro Drill
NS TOOL
With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.- Volume Discount
Configure nowStarting from∗ ： 65.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
MUGEN-COATING Point Drill (for Pilot Hole Machining) MDR-PD
NS TOOL
Drill for pilot hole machining for Infinity miniature drill. Also usable for drilling thin plates- Volume Discount
Configure nowStarting from∗ ： 55.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Drill Carbide for High Hardness Steel (From 70HRC)
OSG
Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 102.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
OSG
Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications- Volume Discount
Configure nowStarting from∗ ： 159.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Micro Drill "NEO PRO" Short Blades
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).- Volume Discount
Configure nowStarting from∗ ： 35.70 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Micro Drill "NEO PRO" Standard Blade Length
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).- Volume Discount
Configure nowStarting from∗ ： 35.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
F1 Drill DX-SFDM Type
DIJET
It features stable machinability and long tool life, and enables highly efficient machining. As it is made of TiCN material, it is abrasion resistant, corrosion resistant, heat resistant and has low friction properties.Configure nowStarting from∗ ： 338.61 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525
GUHRING
The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.Configure nowStarting from∗ ： 203.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Straight Shank Drill Series 1 GT100 670
GUHRING
The go-to part for drilling deep holes. A long coated drill for high-efficiency machining (Feature 1).- Volume Discount
Configure nowStarting from∗ ： 83.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Straight Shank Drill, Regular Type-N 2456
GUHRING
Versatile drill with FIRE (TiAlN) coating for general drilling applications.- Volume Discount
Configure nowStarting from∗ ： 115.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 125.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Tapered Shank Drill, Stub GV120 363
GUHRING
This drill is ideal for stainless steel machining.- Volume Discount
Configure nowStarting from∗ ： 115.63 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Micro Drill, 15 X D, Type-N 6412
GUHRING
Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machiningConfigure nowStarting from∗ ： 190.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Brazing Gun Drill EB80 5460
GUHRING
Brazed carbide head type with a tube that uses highly springy hardened steel pipe. The screwdriver diameter is metric to support oil hole holders for machining centers.Configure nowStarting from∗ ： 152.61 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SUMOCHAM Head, Processing Diameter 6.0 mm–32.9 mm ICK/ICM/ICP
ISCAR
[Features]
・ Standard type
-3 types for P, M and K types
Tool material: carbide.Configure nowStarting from∗ ： 100.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 89.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide Drill 2D Type AD-2D
OSG
[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 37.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 4D Type AD-4D
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 43.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 30D Type With Oil Hole ADO-30D
OSG
[Features]
· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesConfigure nowStarting from∗ ： 156.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
EMC Super Drill Bit Stub Type
FUKUDA
[Features]
· High Quality Powdered High-Speed Steel
· TiAIN Coating
· Stub TypeConfigure nowStarting from∗ ： 21.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS Coated Carbide Composite Spiral Drill, Stub Model
MISUMI
[Features]
-Designed with a 30° helix angle near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.- Volume Discount
Configure nowStarting from∗ ： 96.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
[Features]
-Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously
-Supports a wide range of materials, from general steel to stainless steel
-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 61.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition- Volume Discount
Configure nowStarting from∗ ： 57.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
[Features]
-Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling
-Supports a wide range of materials, from general steel to stainless steel
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
MISUMI
[Features]
-The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-The use of triple rake and R-type thinning achieves high centripetal force
-Designed with larger core diameter than TAC-ESDBA to improve durability
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 47.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.- Volume Discount
Configure nowStarting from∗ ： 56.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning
-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 42.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Capable of high feed and high speed cutting from general steel to stainless steel
-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation
-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning
-Suppresses chipping by adopting chamfer treatment on the shoulder
-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 111.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-Adopting a fluted cutting edge achieves outstanding sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning
-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 37.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Stub
MISUMI
[Features]
-Designed with small core diameter to improve chip evacuation
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 25.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Supports a wide range of materials, from general steel to stainless steel
-Achieves excellent strength by adopting a straight cutting edge
-Demonstrates high centripetal force by using three chip and X-type thinning
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.- Volume Discount
Configure nowStarting from∗ ： 87.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Straight Shank / Stub Model
MISUMI
[Features]
-Multi-faceted carbide drill for a wide range of applications
-TiAlN coating enables high-speed cutting
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the drill, its performance, pricing, etc.- Volume Discount
Configure nowStarting from∗ ： 21.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Straight Shank / Regular
MISUMI
[Features]
-Multi-faceted carbide drill for a wide range of applications
-TiAlN coating enables high-speed cutting
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 23.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Long Drill, Straight Shank
MISUMI
Carbide long drill that achieves the high efficiency deep-hole drilling- Volume Discount
Configure nowStarting from∗ ： 100.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | UNION TOOL | MITSUBISHI MATERIALS | NS TOOL | NS TOOL | NS TOOL | OSG | OSG | ATOM | ATOM | DIJET | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | ISCAR | OSG | OSG | OSG | OSG | FUKUDA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Carbide Drill High Hardness Steel with Oil Hole (From 55HRC) | End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525 | SUMOCHAM Head, Processing Diameter 6.0 mm–32.9 mm ICK/ICM/ICP | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model | |||||||||||||||||||||||||||||||||||||
| Starting from∗ | 8.17 € *Unit price with basic configuration Volume Discount | 87.80 € *Unit price with basic configuration | 9.15 € *Unit price with basic configuration | 15.20 € *Unit price with basic configuration | 94.07 € *Unit price with basic configuration | 91.21 € *Unit price with basic configuration | 9.06 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.37 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 35.95 € *Unit price with basic configuration | 16.45 € *Unit price with basic configuration Volume Discount | 50.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 65.94 € *Unit price with basic configuration Volume Discount | 55.82 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 102.10 € *Unit price with basic configuration Volume Discount | 159.00 € *Unit price with basic configuration Volume Discount | 35.70 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 35.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 338.61 € *Unit price with basic configuration | 203.69 € *Unit price with basic configuration | 83.26 € *Unit price with basic configuration Volume Discount | 115.10 € *Unit price with basic configuration | 125.39 € *Unit price with basic configuration | 115.63 € *Unit price with basic configuration Volume Discount | 190.15 € *Unit price with basic configuration | 152.61 € *Unit price with basic configuration | 100.75 € *Unit price with basic configuration | 89.70 € *Unit price with basic configuration Volume Discount | 37.21 € *Unit price with basic configuration Volume Discount | 43.71 € *Unit price with basic configuration Volume Discount | 156.60 € *Unit price with basic configuration | 21.96 € *Unit price with basic configuration | 96.26 € *Unit price with basic configuration Volume Discount | 61.06 € *Unit price with basic configuration Volume Discount | 57.87 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 47.71 € *Unit price with basic configuration Volume Discount | 56.44 € *Unit price with basic configuration Volume Discount | 42.01 € *Unit price with basic configuration Volume Discount | 111.36 € *Unit price with basic configuration Volume Discount | 37.87 € *Unit price with basic configuration Volume Discount | 25.57 € *Unit price with basic configuration Volume Discount | 87.11 € *Unit price with basic configuration Volume Discount | 21.46 € *Unit price with basic configuration Volume Discount | 23.12 € *Unit price with basic configuration Volume Discount | 100.26 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | Same day | Same day | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 6 Days | 8 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Hole diameter (drill diameter) D(mm) | 2 ～ 13 | 3.7 ～ 10 | 1.2 ～ 13 | 2 ～ 32 | 2 ～ 12 | 0.02 ～ 0.08 | 0.5 ～ 6 | 0.5 ～ 20 | 0.3 ～ 3 | 0.5 ～ 32 | 0.01 ～ 0.1 | 0.01 ～ 0.1 | 0.1 ～ 1 | 2 ～ 12 | 3.3 ～ 12 | 0.1 ～ 2.99 | 0.03 ～ 3 | 16.5 ～ 20 | 3 ～ 20 | 2 ～ 12.5 | 15.5 | - | 8.3 ～ 33 | 1.4 ～ 3 | 4 ～ 12 | 6 ～ 25.9 | 3 ～ 20 | 2 ～ 12 | 2 ～ 20 | 3.5 ～ 10 | 11 ～ 15 | 3 ～ 12 | 3 ～ 13 | 2 ～ 13 | 1 ～ 11 | 3 ～ 13 | 3 ～ 13 | 3 ～ 8 | 4.2 ～ 7 | 3 ～ 13 | 0.3 ～ 6 | 3 ～ 13 | 1 ～ 8 | 1 ～ 8 | 3 ～ 10 |
| Groove Length L(mm) | 24 ～ 101 | 24 ～ 60 | 16 ～ 101 | 24 ～ 185 | 18 ～ 76 | 0.12 ～ 0.48 | 6 ～ 43 | 3 ～ 66 | 4.5 ～ 45 | 6 ～ 155 | 0.1 ～ 1 | 0.1 ～ 1 | 0.2 ～ 2 | 12 ～ 76 | 32 ～ 96 | 0.6 ～ 12 | 0.3 ～ 25 | 112 ～ 114 | 50 ～ 258 | 85 ～ 205 | 120 | - | 49 ～ 120 | 25 ～ 54 | 155 ～ 400 | - | 15 ～ 88 | 14 ～ 55 | 20 ～ 101 | 116 ～ 330 | - | 20 ～ 55 | 20 ～ 71 | 12 ～ 77 | 12 ～ 71 | 20 ～ 60 | 28 ～ 77 | 20 ～ 41 | 24 ～ 53 | 16 ～ 78 | 2 ～ 28 | 28 ～ 77 | 6 ～ 37 | 12 ～ 75 | 60 ～ 140 |
| work material | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Titanium[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | High Hardness Steel[◎] | Quenched and tempered steel[◎] / High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | - | General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[◎] | General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[○] | Stainless Steel[○] | General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Tool Material Type | Cobalt HSS | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Cobalt HSS | Powder high-speed steel | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-grade Powdered High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Overall Length L(mm) | 49 ～ 151 | 56 ～ 110 | 50 ～ 158 | 56 ～ 255 | 54 ～ 126 | 38 | 38 ～ 87 | 38 ～ 132 | 38 ～ 80 | 50 ～ 235 | 40 | 40 | 38 | 42 ～ 120 | 78 ～ 156 | 38 | 38 ～ 50 | 167 ～ 179 | 90 ～ 310 | 125 ～ 295 | 178 | - | 130 ～ 269 | 62 ～ 87 | 200 ～ 450 | - | 100 ～ 250 | 62 ～ 102 | 66 ～ 153 | 185 ～ 390 | 44 ～ 127 | 50 ～ 115 | 62 ～ 124 | 46 ～ 124 | 45 ～ 118 | 66 ～ 107 | 66 ～ 124 | 62 ～ 79 | 66 ～ 91 | 46 ～ 137 | 38 ～ 66 | 66 ～ 124 | 26 ～ 79 | 34 ～ 117 | 100 ～ 200 |
| Shank Type | Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / Straight Shank | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank | Straight Shank | Straight Shank | - | Taper shank | - | - | - | End Mill Shank / Straight Shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | Straight Shank | End Mill Shank | End Mill Shank | Straight Shank | Straight Shank | Straight Shank |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiN | Other | DLC | TiCN | Dia Coat | Other | TiN | Other | Other | TiAlN | TiAlN | TiAlN | TiAlN | Other | Other | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | Other | TiN | Other | Other | Other | Other | TiN | Other | Other | Other | Other | Other | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| With/without Oil Hole | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | Available | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | - | N/A | Available / N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | N/A | N/A | Available / N/A |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2×10D
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3×10D
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.35 / 4.50
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.40 / 4.60
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.70 / 5.00
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4×10D
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.25 / 5.70
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.30 / 5.80
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.65 / 5.90
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.00 / 6.80
- 5×10D
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.10 / 6.90
- 5.1×10D
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.30 / 7.20
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.50 / 7.40
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.55 / 7.50
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.6×10D
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.97
- 6
- 6.0～6.4
- 6×10D
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.1×10D
- 6.15
- 6.2
- 6.2×10D
- 6.25
- 6.3
- 6.3×10D
- 6.35
- 6.35 (¼")
- 6.37
- 6.375
- 6.4
- 6.4×10D
- 6.45
- 6.5
- 6.5～6.9
- 6.5×10D
- 6.53
- 6.55
- 6.6
- 6.60 / 8.90
- 6.6×10D
- 6.63
- 6.65
- 6.7
- 6.7×10D
- 6.75
- 6.75 / 9.10
- 6.76
- 6.8
- 6.8×10D
- 6.85
- 6.85 / 9.20
- 6.9
- 6.90 / 9.30
- 6.9×10D
- 6.91
- 6.95
- 6.97
-
7～7.98
- 7
- 7.0～7.4
- 7.00 / 9.50
- 7×10D
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.1×10D
- 7.14
- 7.15
- 7.2
- 7.2×10D
- 7.25
- 7.25 / 9.80
- 7.3
- 7.30 / 9.80
- 7.3×10D
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.4
- 7.40 / 9.80
- 7.4×10D
- 7.45
- 7.49
- 7.5
- 7.5～7.9
- 7.5×10D
- 7.52
- 7.54
- 7.55
- 7.6
- 7.6×10D
- 7.65
- 7.67
- 7.7
- 7.7×10D
- 7.75
- 7.8
- 7.8×10D
- 7.85
- 7.9
- 7.9×10D
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
-
8～8.96
- 8
- 8.0～8.4
- 8×10D
- 8.00 / 10.80
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.1×10D
- 8.15
- 8.2
- 8.2×10D
- 8.25
- 8.3
- 8.3×10D
- 8.33
- 8.35
- 8.4
- 8.4×10D
- 8.43
- 8.45
- 8.5
- 8.5～8.9
- 8.5×10D
- 8.50 / 11.50
- 8.53
- 8.55
- 8.58
- 8.6
- 8.6×10D
- 8.60 / 11.60
- 8.61
- 8.65
- 8.7
- 8.7×10D
- 8.70 / 11.70
- 8.73
- 8.75
- 8.8
- 8.8×10D
- 8.84
- 8.85
- 8.9
- 8.9×10D
- 8.95
- 8.96
-
9～9.97
- 9
- 9.0～9.4
- 9×10D
- 9.00 / 11.80
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.1×10D
- 9.13
- 9.15
- 9.2
- 9.2×10D
- 9.21
- 9.24
- 9.25
- 9.26
- 9.3
- 9.3×10D
- 9.30 / 12.60
- 9.34
- 9.35
- 9.36
- 9.38
- 9.4
- 9.4×10D
- 9.45
- 9.5
- 9.5～9.9
- 9.5×10D
- 9.52
- 9.53
- 9.54
- 9.55
- 9.58
- 9.6
- 9.6×10D
- 9.65
- 9.7
- 9.7×10D
- 9.75
- 9.8
- 9.8×10D
- 9.85
- 9.9
- 9.9×10D
- 9.92
- 9.95
- 9.96
- 9.97
-
10～10.96
- 10
- 10-10.4
- 10.0-10.4
- 10×10D
- 10.0～10.4
- 10.00 - 10.49
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.15
- 10.2
- 10.2×10D
- 10.25
- 10.25 / 13.80
- 10.26
- 10.3
- 10.3×10D
- 10.30 / 13.80
- 10.32
- 10.35
- 10.4
- 10.4×10D
- 10.40 / 13.80
- 10.45
- 10.49
- 10.5
- 10.5-10.9
- 10.5×10D
- 10.5～10.9
- 10.50 - 10.99
- 10.50 / 13.80
- 10.55
- 10.6
- 10.6×10D
- 10.65
- 10.7
- 10.7×10D
- 10.71
- 10.72
- 10.75
- 10.8
- 10.8×10D
- 10.80 / 14.60
- 10.85
- 10.9
- 10.9×10D
- 10.95
- 10.96
-
11～11.96
- 11
- 11.0-11.4
- 11×10D
- 11.0～11.4
- 11.00 - 11.49
- 11.00 / 14.90
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.11
- 11.12
- 11.14
- 11.15
- 11.2
- 11.2×10D
- 11.20 / 15.10
- 11.22
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.45
- 11.5
- 11.5-11.9
- 11.5-10.9
- 11.5×10D
- 11.5～11.9
- 11.50 - 11.99
- 11.50 / 15.50
- 11.51
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.65
- 11.7
- 11.7×10D
- 11.75
- 11.8
- 11.8×10D
- 11.85
- 11.9
- 11.9×10D
- 11.91
- 11.95
- 11.96
-
12～12.96
- 12
- 12.0-12.4
- 12×10D
- 12.0～12.4
- 12.00 - 12.49
- 12.00 / 15.80
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.10 / 16.30
- 12.2
- 12.25
- 12.25 / 16.50
- 12.3
- 12.4
- 12.5
- 12.5-12.9
- 12.5～12.9
- 12.50 - 12.99
- 12.5～14.5
- 12.50 / 16.90
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.96
-
13～13.95
- 13
- 13.0-13.4
- 13.0～13.4
- 13.00 - 13.49
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.487
- 13.49
- 13.5
- 13.5-13.9
- 13.5 to 13.9
- 13.50 - 13.99
- 13.50 / 17.80
- 13.55
- 13.6
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 13.9
- 13.95
-
14～14.96
- 14
- 14.0-14.4
- 14.0～14.4
- 14.00 - 14.99
- 14~16
- 14.00 / 18.90
- 14.1
- 14.10 / 19.00
- 14.2
- 14.25
- 14.25 / 19.20
- 14.275
- 14.29
- 14.3
- 14.4
- 14.5
- 14.5-14.9
- 14.5～14.9
- 14.50 / 19.60
- 14.55
- 14.6
- 14.68
- 14.69
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
-
15～15.95
- 15
- 15.0-15.9
- 15.0-15.4
- 15.0～15.9
- 15.00 - 15.99
- 15.0 to 17.0
- 15.08
- 15.1
- 15.10 / 19.80
- 15.2
- 15.25
- 15.3
- 15.4
- 15.48
- 15.5
- 15.5-16.4
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.87
- 15.875
- 15.88
- 15.9
- 15.95
-
16～16.9
- 16
- 16.0-16.9
- 16.0～16.9
- 16.00 - 16.99
- 16.08
- 16.1
- 16.13
- 16.2
- 16.25
- 16.27
- 16.3
- 16.4
- 16.5
- 16.5-17.4
- 16.5~19.5
- 16.55
- 16.6
- 16.662
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
-
17～17.9
- 17
- 17.0-17.9
- 17.0～17.9
- 17.00 - 17.99
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.45
- 17.46
- 17.5
- 17.5-18.4
- 17.50 / 19.80
- 17.5～21.5
- 17.55
- 17.6
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
-
18～18.9
- 18
- 18.0-18.9
- 18.0～18.9
- 18.00 - 18.99
- 18.1
- 18.2
- 18.25
- 18.26
- 18.3
- 18.35
- 18.4
- 18.5
- 18.5-19.4
- 18.6
- 18.6～19.5
- 18.65
- 18.7
- 18.75
- 18.8
- 18.9
-
19～19.95
- 19
- 19.0-19.9
- 19.0～19.9
- 19.00 - 19.99
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.5-20.4
- 19.55
- 19.6
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
-
20～20.9
- 20
- 20.0～20.9
- 20.00 - 20.99
- 20~23.9
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.5-21.4
- 20.6
- 20.62
- 20.625
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21.0～21.9
- 21.00 - 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.5-22.4
- 21.6
- 21.7
- 21.75
- 21.8
- 21.83
- 21.9
-
22～22.9
- 22
- 22.0～22.9
- 22.00 - 22.99
- 22.0～26.0
- 22.1
- 22.2
- 22.22
- 22.225
- 22.23
- 22.25
- 22.3
- 22.4
- 22.5
- 22.5-23.4
- 22.6
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23.0～23.9
- 23.00 - 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.5-24.4
- 23.6
- 23.7
- 23.75
- 23.79
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.0～24.9
- 24.00 - 24.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.5
- 24.5-25.4
- 24.6
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.0～25.9
- 25.00 - 25.99
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.5-26.4
- 25.6
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 - 26.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.5-27.4
- 26.59
- 26.6
- 26.65
- 26.7
- 26.75
- 26.8
- 26.9
- 26.97
- 26.975
- 26.99
-
27～27.9
- 27
- 27.00 - 27.99
- 27.0～32.0
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.5-28.4
- 27.6
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.00 - 28.99
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.5-29.4
- 28.57
- 28.575
- 28.58
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 - 29.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.5-30.4
- 29.56
- 29.6
- 29.65
- 29.7
- 29.8
- 29.9
-
30～30.5
- 30
- 30.00 - 30.99
- 30 ～ 32
- 30.1
- 30.14
- 30.15
- 30.5
-
31～31.75
- 31
- 31.00 - 33.00
- 31.5
- 31.75
-
32～32.5
- 32
- 32.15
- 32.3
- 32.5
-
33～33.5
- 33
- 33.0～41.0
- 33.325
- 33.5
-
34～34.925
- 34
- 34.5
- 34.925
-
35～35.5
- 35
- 35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37 ～ 40
- 37.5
- 37.7
-
38～38.5
- 38
- 38.1
- 38.5
-
39～39.675
- 39
- 39.5
- 39.67
- 39.675
-
40～40.5
- 40
- 40 ～ 45
- 40.5
-
41～41.5
- 41
- 41.275
- 41.5
-
42～42.85
- 42
- 42.0～54.0
- 42.5
- 42.84
- 42.85
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44~52
- 44.45
- 44.5
-
45～45.5
- 45
- 45 ～ 50
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.625
- 47
- 47.5
- 47.625
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.975
- 53
- 53~63
- 53.5
- 53.975
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60 ～ 65
- 60.325
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1,000
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.4
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.5
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.5
- 32
- 32.3
- 32.4
- 32.5
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.5
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47～47.5
- 47
- 47.5
-
48
-
49
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55
-
56
-
57～57.5
- 57
- 57.5
-
58
-
59
-
60
-
61
-
62～62.5
- 62
- 62.5
-
63～63.4
- 63
- 63.4
-
64
-
65～65.5
- 65
- 65.5
-
66
-
67～67.5
- 67
- 67.1
- 67.5
-
68
-
69
-
70
-
71～71.7
- 71
- 71.7
-
72～72.5
- 72
- 72.5
-
73
-
74
-
75
-
76～76.8
- 76
- 76.8
-
77～77.5
- 77
- 77.5
-
78
-
79～79.3
- 79
- 79.3
-
80
-
81～81.4
- 81
- 81.4
-
82～82.5
- 82
- 82.3
- 82.5
-
83
-
84
-
85～85.4
- 85
- 85.4
-
86～86.3
- 86
- 86.3
-
87～87.5
- 87
- 87.5
-
88～88.6
- 88
- 88.6
-
89
-
90～90.1
- 90
- 90.1
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94～94.7
- 94
- 94.7
-
95
-
96
-
97～97.2
- 97
- 97.2
-
98～98.8
- 98
- 98.8
-
99
-
100～100.2
- 100
- 100.2
-
101
-
102
-
103～103.4
- 103
- 103.4
-
104～104.2
- 104
- 104.2
-
105
-
106
-
107
-
108～108.4
- 108
- 108.4
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124～124.3
- 124
- 124.3
-
125
-
126
-
127
-
128
-
129～129.3
- 129
- 129.3
-
130
-
131
-
132
-
133
-
134
-
135～135.3
- 135
- 135.3
-
136
-
137
-
138
-
140～140.6
- 140
- 140.6
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157.2
-
158
-
159
-
160
-
161
-
162～162.2
- 162
- 162.2
-
163
-
164
-
165
-
166
-
167～167.2
- 167
- 167.2
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
200
-
201
-
202
-
205
-
206
-
207
-
208
-
209
-
210
-
212～212.77
- 212
- 212.77
-
213
-
214
-
215
-
216
-
218
-
219
-
220
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
230
-
231
-
232
-
234
-
235
-
238
-
239
-
240
-
242
-
243
-
245
-
246
-
247
-
248
-
249.63
-
250
-
252
-
253
-
254
-
255
-
257
-
258
-
260～260.15
- 260
- 260.15
-
262
-
263
-
264
-
265
-
266
-
267
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
281～281.77
- 281
- 281.77
-
282
-
285
-
287
-
288
-
290
-
292
-
294
-
295
-
297
-
298
-
300
-
302
-
305
-
308
-
310
-
311
-
314
-
315
-
318
-
320
-
321
-
322
-
323～323.63
- 323
- 323.63
-
325
-
327
-
330
-
336
-
337
-
339.15
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
800
-
860
-
1030
-
-
work material
-
Tool Material Type
-
Overall Length L(mm)
-
Shank Type
-
Coating Y/N
- Available
- N/A
-
Coating Type
-
With/without Oil Hole
Brand
-
- GUHRING (85)
- NACHI(FUJIKOSHI) (55)
- OSG (54)
- MITSUBISHI MATERIALS (21)
- IWATA TOOL (10)
- DIJET (8)
- NS TOOL (8)
- ATOM (6)
- OKAZAKI SEIKO (5)
- TUNGALOY (5)
- UNION TOOL (4)
- EIKOSHA (3)
- ISCAR (3)
- FUKUDA (2)
- SANDVIK (2)
- NGK SPARK PLUG (1)
- KYOWA SEIKO (1)
- KYOCERA (1)
- NIKKEN KOSAKUSHO (1)
- RYOKO SEIKI (1)
- TWININGS (1)
- WIDIA (1)
- HOZAN (0)
- MAKITA (0)
- OMIKOGYO (0)
- ALPEN (0)
- THE CUT (0)
- METABO (0)
- DIXI (0)
- ISHIHASHI (0)
- ESCO (0)
- WIDIN (0)
- 7 LEADERS (0)
- ASAHI TOOLS (0)
- TOYO DRILL (0)
CAD data type
-
- 2D
- 3D
Categories related to Drill Bits
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.