Înregistrați-vă
Criterii de filtrare

Ștergeți tot

  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • UTDSX UT Micro Coat, Unimax Drill, Short Blade

      UNION TOOL

      UTDSX UT Micro Coat, Unimax Drill, Short Blade

      [Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
      Citiți mai mult
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 21.5 ~ 10General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableTiCNN/A
      Preț normal (fără TVA):
      19.21 €
      Dată de expediere normală:
      6 zile lucrătoare
      Configurare
    • TFD Carbide Drill with TiCN Coating
      • Volume Discount

      IWATA TOOL

      TFD Carbide Drill with TiCN Coating

      Highly circular, not requiring a reamer bit after drilling. Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and stub groove length. Ideal for drilling tap pilot holes.
      Citiți mai mult
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 31.8 ~ 16.8General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide50End Mill ShankAvailableTiCNN/A
      Preț normal (fără TVA):
      70.76 €
      Dată de expediere normală:
      6 zile lucrătoare
      Configurare
    • EZ Drill (for 3D) EZDM Type
      • Volume Discount

      DIJET

      EZ Drill (for 3D) EZDM Type

      It is a tool with excellent abrasion resistance.
      Citiți mai mult
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      11.1 ~ 15.958 ~ 80General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]Carbide122 ~ 146End Mill ShankAvailableTiCNAvailable
      Preț normal (fără TVA):
      255.84 €
      Dată de expediere normală:
      8 zile lucrătoare
      Configurare
    • EZ Drill (for 5D) EZDL Type

        DIJET

        EZ Drill (for 5D) EZDL Type

        It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows smooth chip flow and easy resharpening.
        Citiți mai mult
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        11.1 ~ 15.992 ~ 128General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]Carbide158 ~ 194End Mill ShankAvailableTiCNAvailable
        Preț normal (fără TVA):
        292.65 €
        Dată de expediere normală:
        8 zile lucrătoare
        Configurare
      • F1 Drill DX-SFDM Type

          DIJET

          F1 Drill DX-SFDM Type

          It features stable machinability and long tool life, and enables highly efficient machining. As it is made of TiCN material, it is abrasion resistant, corrosion resistant, heat resistant and has low friction properties.
          Citiți mai mult
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          16.5 ~ 20112 ~ 114General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide167 ~ 179Straight ShankAvailableTiCNN/A
          Preț normal (fără TVA):
          338.61 €
          Dată de expediere normală:
          8 zile lucrătoare
          Configurare
        • F1 Reamer DX-DHSR Type

            DIJET

            F1 Reamer DX-DHSR Type

            It is a tool with excellent abrasion resistance.
            Citiți mai mult
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            3 ~ 1220 ~ 50General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○]-70 ~ 135End Mill Shank / Straight ShankAvailableTiCNAvailable
            Preț normal (fără TVA):
            230.07 €
            Dată de expediere normală:
            8 zile lucrătoare
            Configurare