Screw-Hole-Related Tools（Tool Material Type：Powder high-speed steel）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Trapezoidal Thread Cutting Tap _TMB 29100

WALTER PROTOTYP

HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work Material

Select to compare

Configure now
Starting from^∗ ：	693.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.66 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT

OSG

Used for machining of pipe taper female threads, but is suitable for easy processing conditions

Select to compare

Configure now
Starting from^∗ ：	45.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Performance Roll Tap HP+ RZ / HP-RZ

YAMAWA MFG

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Groove-Free Tap Series UM New Roll UM-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	24.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

MISUMI

[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

OSG

Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

Select to compare

Configure now
Starting from^∗ ：	22.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

OSG

Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.

Select to compare

Configure now
Starting from^∗ ：	17.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	84.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

OSG

Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.49 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Select to compare

Configure now
Starting from^∗ ：	60.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	6 Days

Axe Tap AXE-HT

YAMAWA MFG

The blade shape adopted is less prone to damage during machining of aluminum alloy castings, etc. Achieves a longer life.

Select to compare

Configure now
Starting from^∗ ：	793.64 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Short Chamfer Torqueless Roll Taps SC-TL-RZ

YAMAWA MFG

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Titanium Alloy, for Through Hole ZET-P

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Titanium Alloy ZET-B

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap with Nickel Base Alloy ZEN-P

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Nickel Base Alloy ZEN-B

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	23.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SU Roll Tap SURZ

YAMAWA MFG

[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.44 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	WALTER PROTOTYP	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	OSG	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	YAMAWA MFG
Product Series	Trapezoidal Thread Cutting Tap _TMB 29100	Groove-Free Tap Series X Performer S-XPF	A Tap Series, Spiral Tap, A-SFT	A Tap Series for Pipes Point Tap A-POT	Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT	Hand Tap Series, for Difficult-to-Machine Material, CPM-HT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	High Performance Roll Tap HP+ RZ / HP-RZ	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	Groove-Free Tap Series UM New Roll UM-NRT	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT	Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT	Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT	Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT	Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT	Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series VP New Roll VP-NRT	Axe Tap AXE-HT	Short Chamfer Torqueless Roll Taps SC-TL-RZ	Spiral Tap for Titanium Alloy, for Through Hole ZET-P	Spiral Tap for Titanium Alloy ZET-B	Dry Processing Roll Tap OL+RZ / OL-RZ	Tap with Nickel Base Alloy ZEN-P	Spiral Tap for Nickel Base Alloy ZEN-B	A Tap Series Point Tap Long Shank A-LT-POT	SU Roll Tap SURZ
Starting from^∗	693.66 € *Unit price with basic configuration	19.66 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	16.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	45.80 € *Unit price with basic configuration	11.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	24.43 € *Unit price with basic configuration	24.43 € *Unit price with basic configuration Volume Discount	11.72 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	31.64 € *Unit price with basic configuration Volume Discount	19.89 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	24.50 € *Unit price with basic configuration	52.15 € *Unit price with basic configuration Volume Discount	22.41 € *Unit price with basic configuration	28.34 € *Unit price with basic configuration	17.33 € *Unit price with basic configuration	84.11 € *Unit price with basic configuration Volume Discount	26.47 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	9.49 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	40.05 € *Unit price with basic configuration Volume Discount	29.98 € *Unit price with basic configuration Volume Discount	44.76 € *Unit price with basic configuration Volume Discount	60.18 € *Unit price with basic configuration	19.82 € *Unit price with basic configuration Volume Discount	- Volume Discount	793.64 € *Unit price with basic configuration	29.71 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	27.00 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	23.65 € *Unit price with basic configuration	37.44 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	Same day	6 Days	5 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	9 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days
Screw Types	Trapezoid	Meter	Meter / Unified	Meter / Unified	Taper for Pipe	Meter	Meter / Unified	Meter / Unified	Meter	Miniature	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Meter / Unified	Meter / Unified	Meter	Meter	Meter	Meter	Meter / Unified	Meter	Meter	Meter	Meter / Unified
Screw size (Nominal)	Tr8 ～ Tr18	M3 ～ M45	1/2-20UNF ～ M24	1/2-20UNF ～ M24	R1 ～ R3/8	M3 ～ M48	M1 ～ M12	No.10-32UNF ～ M20	M1.4 ～ M48	S0.5 ～ S0.9	M1 ～ No6UN	M2 ～ M24	M2 ～ M12	M4 ～ M8	M8	M3 ～ M12	M16	M3 ～ M12	M1.4 ～ M48	M8 ～ M12	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	M1 ～ No4UN	M1 ～ M12	M6 ～ M12	M1 ～ M6	M3 ～ M20	M3 ～ M20	No.10-32UNF ～ M6	M3 ～ M20	M3 ～ M20	M2 ～ M24	No.2 ～ No.6
Pitch (P), Number of Threading(mm)	1.5 ～ 4	0.5 ～ 4.5	0.25 ～ 3	0.25 ～ 3	11 ～ 28	0.5 ～ 5	0.25 ～ 56	0.25 ～ 1.75	0.3 ～ 5	.02 ～ 0.225	0.25 ～ 56	0.25 ～ 3	0.4 ～ 1.75	0.7 ～ 1.25	1.25	0.5 ～ 1.75	2	0.5 ～ 1.75	0.3 ～ 5	1.25 ～ 1.75	11 ～ 28	11 ～ 19	11 ～ 28	0.25 ～ 56	0.25 ～ 56	1 ～ 1.75	0.2 ～ 1	0.5 ～ 2.5	0.5 ～ 2.5	0.25 ～ 1	0.5 ～ 2.5	0.5 ～ 2.5	0.25 ～ 3	0.2 ～ 56
Chamfer threads (Lcf)	-	2P ～ 4P	1.5P ～ 2.5P	5P	3P	2P ～ 5P	2P ～ 4P	2P ～ 4P	3P	2P	1P	2.5P	2.5 P	2.5P	5P	2.5P	3P	2.5P ～ 5P	5P	5P	2.5P	2.5P	2.5P	2P	2P ～ 4P	1.5P	1P	5P	3P	4P	4.5P	3P	5P	2P
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	Spiral Tap	Roll tap	Spiral Tap	Point tap	Tap for pipes	Hand Tap	Roll tap	Roll tap	Spiral Tap	Roll tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Hand Tap	Roll tap	Spiral Tap	Spiral Tap	Roll tap	Point tap	Spiral Tap	Point tap	Roll tap
Hole type	For through hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For through hole	For through hole	For blind hole	For through hole	For blind hole
Coating Y/N	N/A	Available	Available	Available	Available	N/A	Available	Available	N/A	Available	Available	Available	N/A	Available	Available	Available	N/A	Available	N/A	N/A	N/A	N/A	N/A	Available	Available	Available	Available	N/A	N/A	Available	N/A	N/A	Available	Available
Coating Type	Non-Coated	TiCN	Other	Other	TiCN	Non-Coated	TiCN	TiCN	Non-Coated	CrN	TiCN	Other	-	Other	Other	TiCN	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	TiN	TiCN	-	-	TiCN	-	-	Other	Other
Overall Length (L)(mm)	90 ～ 225	46 ～ 220	34 ～ 120	34 ～ 120	59 ～ 109	46 ～ 185	60 ～ 200	36 ～ 105	34 ～ 185	30	30 ～ 62	80 ～ 200	40 ～ 82	52 ～ 70	70	46 ～ 82	150	46 ～ 82	34 ～ 185	150	55 ～ 95	62 ～ 95	120 ～ 150	30 ～ 46	30 ～ 82	62 ～ 82	36 ～ 62	46 ～ 105	46 ～ 105	36 ～ 62	46 ～ 105	46 ～ 105	80 ～ 200	-

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No0UN

NO.0-80UNF

No.0-80UNF

No.10

S0.1

NO.1-72UNF

No.1-72UNF

NO.1-64UNC

No.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12-32UNEF

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-40UNF

No.6-32UNC

S0.7

No.8

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1"

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

PT 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-20UNEF

1´-14UNS

1'-12UNF

1´-12UNF

1´-11

1′-11

1-8UNC

1'-8UNC

1´-8UNC

G1"-3"

1"1/2UN

1"1/2

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1´1/2-11

1′1/2-11

1 1/2-8UN

1"1/4UN

1"1/4

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1´1/4-11

1′1/4-11

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1´ 1/8-7UNC

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-28UNEF

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1/2W12

1 3/4

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1′3/4-11

1 3/4-8UN

1 3/8

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PS 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-32UNEF

1/4-28UNF

1/4-20UNC

1/4-19

1/4W20

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1'W8

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PF 1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/8SM40

1/8SM44

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

1/16-28

1/16SM80

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2"

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2´-11

2′-11

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

2′1/2-11

W2"1/4

M2.2

M2.3

M2.5

M2.6

3M

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

UNC 3

UNF 3

3′-11

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-20UNEF

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-32UNEF

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

3/16SM24

3/16W24

3/16SM28

3/16SM32

3/16SM40

M3 - M18

SM3/32

3/32SM56

3/32SM100

3.5

M3.5

4

4M

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

5M

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8

5/8UN

G5/8

G 5/8

NPS5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-24UNEF

5/8-18UNF

5/8-11UNC

G5/8 3/4

5/8W11

M5 - M12

M5～13

5/16

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-32UNEF

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5/64SM64

5.5M

M5.5

6

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

No6-40UNF

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8

7/8UN

G7/8

G 7/8

NPS7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-20UNEF

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-28UNEF

7/16-20UNF

7/16-14UNC

7/16W14

SM7/32

7.5

M7.5

EGM 8

M8

MF8

No8UN

STI M8

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

9

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

9/64SM40

M9.5

EGM 10

M10

MF10

No10UN

STI M10

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

PG11

SM11/32

SM11/64

11/64SM40

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

15/64SM28

M16

MF16

Mf16

PG16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M21

PG21

M22

M22X

MF22

Tr 22

M23

M24

M24X

MF24

Tr 24

M25

M25X

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

PG29

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M46

M48

M50

M52

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5

1.5-Shaped

1.5 P

1.5P

2

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

3.5P

4

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

7P

8P

9 P

9P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

41.5

42

44

44.5

45

46

47.62

47.625

48

49

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

61.5

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

230

250

260

270

280

290

300

310

315

460
Drawing

Clear

Brand

- MISUMI (1)
- Cost Efficient Products ()
- OSG (23)
- YAMAWA MFG (9)
- WALTER PROTOTYP (1)
- NACHI(FUJIKOSHI) (0)
- SKC (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear