Screw-Hole-Related Tools（work material：Stainless Steel (JIS-SUS)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SG Spiral Tap SGSP
NACHI(FUJIKOSHI)
[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.Configure nowStarting from∗ ： 30.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Configure nowStarting from∗ ： 19.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, for Stainless EX-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Configure nowStarting from∗ ： 8.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Configure nowStarting from∗ ： 15.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series for Steel HRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris- Volume Discount
Configure nowStarting from∗ ： 8.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series for Steel NRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris- Volume Discount
Configure nowStarting from∗ ： 10.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Solid Mill Thread, No Finishing Flute 60°
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Configure nowStarting from∗ ： 208.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]
A general purpose hand tap made from uncoated high speed steel
High versatility, suitable for a wide range of applications and materials such as aluminium and general steel.- Volume Discount
Configure nowStarting from∗ ： 34.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Configure nowStarting from∗ ： 8.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.- Volume Discount
Configure nowStarting from∗ ： 17.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Solid Mill Thread G (55°)
CARMEX
Threading can be performed for both internal and external threads with a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.- Volume Discount
Configure nowStarting from∗ ： 222.23 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Hand Tap Series, for Stainless Steel, EX-SUS-HT
OSG
Suited for machining stainless steel, heat-resistant steel, and nickel manganese steel. Cut carbon steel and alloy steel as well.- Volume Discount
Configure nowStarting from∗ ： 10.09 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).- Volume Discount
Configure nowStarting from∗ ： 13.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT
OSG
Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.- Volume Discount
Configure nowStarting from∗ ： 10.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series UM New Roll UM-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 31.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 19.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Performance Roll Tap HP+ RZ / HP-RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)- Volume Discount
Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 25.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
MISUMI
[Features]
-Used for tapping that produces no chips
-Suitable for a wide range of materials, from general steel to non-ferrous alloys
-Excellent abrasion resistance and chip weld resistance due to TiN coating.Configure nowStarting from∗ ： 55.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 7.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Taflet for Steel TFST
NACHI(FUJIKOSHI)
Suitable for thread rolling of mild steel, stainless steel below 20HRC of hardness.Configure nowStarting from∗ ： 19.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 15.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
IT-Toughlet C Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 38.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Seamless TAFLET
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 58.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Short Spiral Tap for Stainless Steel SU-S-SP
YAMAWA MFG
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.- Volume Discount
Configure nowStarting from∗ ： 15.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread BSPT
CARMEX
For both internal and external threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Tapered End Mill
CARMEX
[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened- Volume Discount
Configure nowStarting from∗ ： 119.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft MJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 217.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws
CARMEX
Metric thread / for I.D. thread
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 212.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Configure nowStarting from∗ ： 24.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG Spiral Tap Short Chamfer SGSP-1.5P
NACHI(FUJIKOSHI)
[Features]
・ Bite shape optimized for long life- Volume Discount
Configure nowStarting from∗ ： 19.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
Threading cutters that enable the high-speed stable processing are available at special prices- Volume Discount
Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 181.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
Configure nowStarting from∗ ： 181.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】
MISUMI
[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.- Volume Discount
Configure nowStarting from∗ ： 52.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】
MISUMI
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available- Volume Discount
Configure nowStarting from∗ ： 14.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | CARMEX | MISUMI | OSG | OSG | CARMEX | MISUMI | OSG | OSG | MISUMI | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | OSG | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | TANOI MFG | TANOI MFG | YAMAWA MFG | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | OSG | NACHI(FUJIKOSHI) | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters | MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】 | TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】 | |||||||||||||||||||||||||||||||||
| Starting from∗ | 30.24 € *Unit price with basic configuration | 16.04 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 19.66 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 8.81 € *Unit price with basic configuration Volume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 8.41 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 10.08 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 208.53 € *Unit price with basic configuration | 34.11 € *Unit price with basic configuration Volume Discount | 8.65 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 17.52 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 229.39 € *Unit price with basic configuration | 222.23 € *Unit price with basic configuration Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 10.09 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 13.81 € *Unit price with basic configuration Volume Discount | 10.88 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 22.83 € *Unit price with basic configuration Volume Discount | 31.64 € *Unit price with basic configuration Volume Discount | 19.89 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 24.43 € *Unit price with basic configuration | 24.43 € *Unit price with basic configuration Volume Discount | 25.83 € *Unit price with basic configuration Volume Discount | 55.33 € *Unit price with basic configuration | 7.00 € *Unit price with basic configuration Volume Discount | 19.23 € *Unit price with basic configuration | 101.50 € *Unit price with basic configuration Volume Discount | 15.45 € *Unit price with basic configuration Volume Discount | 24.43 € *Unit price with basic configuration | 38.28 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 58.01 € *Unit price with basic configuration | 15.69 € *Unit price with basic configuration Volume Discount | 229.39 € *Unit price with basic configuration | 119.87 € *Unit price with basic configuration Volume Discount | 217.83 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 212.85 € *Unit price with basic configuration | 24.50 € *Unit price with basic configuration | 19.48 € *Unit price with basic configuration Volume Discount | 110.87 € *Unit price with basic configuration Volume Discount | 181.78 € *Unit price with basic configuration Volume Discount | 181.83 € *Unit price with basic configuration Volume Discount | 52.15 € *Unit price with basic configuration Volume Discount | 14.59 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | Same day | Same day | 6 Days | 6 Days | Same day | Same day | 5 Days | 5 Days | Same day | Same day | 5 Days | 7 Days | 6 Days | Same day | 5 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 8 Days | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days |
| Screw Types | Meter | Meter / Unified | Meter | Meter / Unified / Whitworth | Meter / Unified | Meter | Meter | Meter | Meter | Meter / Unified / Whitworth | Meter / Unified | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Miniature | Meter / Unified | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Parallel for Pipes | Taper for Pipe | Other | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M2 ～ M24 | 1-8UNC ～ M56 | M1 ～ M45 | 1UN ～ M42 | 1/2-20UNF ～ M24 | M1 ～ M4 | M1.2 ～ M10 | - | M3 ～ M10 | 1UN ～ M42 | No0UN ～ M20 | - | M2 ～ M12 | M1.4 ～ M16 | M3 | M3 ～ M10 | M2.5 ～ M10 | M3 ～ M24 | S0.5 ～ S0.9 | M1 ～ No6UN | M1 ～ M12 | No.10-32UNF ～ M20 | M3 ～ M12 | M3 ～ M10 | M2 ～ M24 | M1.4 ～ M10 | - | M1.4 ～ M42 | M3 ～ M12 | M1 ～ M10 | M2 ～ M20 | M3 ～ M20 | - | - | - | - | - | M1 ～ M3 | M2 ～ M24 | M2 ～ M8 | M3 ～ M20 | M1.4 ～ M20 | M3 ～ M12 | M2 ～ M12 | M3 ～ M10 |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 3 | 0.25 ～ 5.5 | 0.2 ～ 4.5 | 0.4 ～ 48 | 0.25 ～ 3 | 0.25 ～ 0.7 | 0.25 ～ 1.25 | - | 0.5 ～ 1.5 | 0.3 ～ 48 | 0.25 ～ 80 | 11 ～ 28 | 0.4 ～ 1.75 | 0.3 ～ 2 | 0.5 | 0.5 ～ 1.5 | 0.45 ～ 1.5 | 0.5 ～ 3 | .02 ～ 0.225 | 0.25 ～ 56 | 0.25 ～ 56 | 0.25 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | 0.4 ～ 3 | 0.3 ～ 1.5 | 0.25 ～ 32 | 0.3 ～ 4.5 | 0.5 ～ 1.75 | 0.2 ～ 1.5 | 0.4 ～ 2.5 | 0.5 ～ 2.5 | - | - | - | - | - | 0.25 ～ 0.5 | 0.25 ～ 3 | 0.4 ～ 2.5 | 0.5 ～ 2.5 | 0.3 ～ 2.5 | 0.5 ～ 1.75 | 0.4 ～ 1.75 | 0.5 ～ 1.5 |
| Chamfer threads (Lcf) | 2.5 | 1.5P ～ 2.5P | 2P ～ 4P | 2.5P ～ 3P | 5P | 2.5P | 2P ～ 4P | - | 1.5 P ～ 9 P | 4P | 2P ～ 4P | - | - | 2.5P | 1.5P | 5 P | 2.5P | 5P | 2P | 1P | 2P ～ 4P | 2P ～ 4P | - | 2 P ～ 4 P | 5 P | 2P ～ 4P | - | 5P | 2P ～ 4P | 1P ～ 4P | 1P ～ 2P | 2.5P | - | - | - | - | - | - | 2.5P | 1.5 | - | - | - | 2.5 P | 1.5 P ～ 2.5 P |
| Tool Material Type | Alloy HSS | Powder high-speed steel / Vanadium High-Speed Steel | Powder high-speed steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Cobalt HSS | High-speed steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Alloy HSS | Carbide | Carbide | Carbide | Powder high-speed steel | Vanadium High-Speed Steel |
| work material | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○/◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] | Stainless Steel (JIS-SUS)[○] |
| Tap Type | Spiral Tap | Spiral Tap | Roll tap | Spiral Tap | Point tap | Roll tap | Roll tap | Thread cutter | Hand Tap | Point tap | Roll tap | Thread cutter | Thread cutter | Spiral Tap | Hand Tap | Point tap | Spiral Tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Point tap | Roll tap | Thread cutter | Point tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Spiral Tap | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Spiral Tap |
| Hole type | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | - | - | For blind hole | For blind hole | - | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole |
| Coating Y/N | Available | Available | Available | N/A | Available | N/A | N/A | Available | N/A | N/A | Available | Available | Available | Available | N/A | Available | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available |
| Coating Type | TiCN | Other | TiCN | Non-Coated | Other | Non-Coated | Non-Coated | Nitriding Treatment | - | Non-Coated | TiN | Nitriding Treatment | TiAlN | TiN | Non-Coated | TiN | Non-Coated | TiN | CrN | TiCN | TiCN | TiCN | Other | TiN | Non-Coated | - | For High Hardness (Silicon Group) / Other | TiN | TiN | Other | TiCN | - | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Other | - | TiAlN | TiAlN | For High Hardness (Silicon Group) | - | TiN |
| Overall Length (L)(mm) | 40 ～ 120 | 34 ～ 250 | 30 ～ 220 | 40 ～ 175 | 34 ～ 120 | 30 ～ 52 | 32 ～ 75 | 58 ～ 101 | 46 ～ 75 | 34 ～ 175 | 30 ～ 105 | 58 ～ 105 | 58 ～ 73 | 34 ～ 95 | 46 | 46 ～ 150 | 44 ～ 75 | 100 ～ 200 | 30 | 30 ～ 62 | 60 ～ 200 | 36 ～ 105 | 80 ～ 150 | 46 ～ 75 | 40 ～ 120 | 34 ～ 75 | 40 | 34 ～ 175 | 80 ～ 150 | 30 ～ 75 | 40 ～ 105 | 46 ～ 105 | 58 ～ 105 | 58 ～ 84 | 58 ～ 64 | 39 ～ 58 | 39 ～ 64 | 39 | 80 ～ 200 | 40 ～ 82 | 57 ～ 115 | 39 ～ 105 | 48 ～ 74 | 40 ～ 82 | 46 ～ 150 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (56)
- YAMAWA MFG (34)
- CARMEX (31)
- NACHI(FUJIKOSHI) (7)
- TANOI MFG (4)
- NS TOOL (2)
- SKC (2)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.