Screw-Hole-Related Tools（work material：Thermosetting plastic (bakelite, phenol, etc.)）

?* Information on days to ship and prices

• 

  Trapezoidal Thread Cutting Tap _TMB 29100

  WALTER PROTOTYP

  HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work Material

  Select to compare

  Configure now
  Starting from∗ ：	693.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread, No Finishing Flute 60°

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.

  Select to compare

  Configure now
  Starting from∗ ：	208.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spiral Tap Series, Carbide Spiral Tap OT-SFT

  OSG

  Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

  Select to compare

  Configure now
  Starting from∗ ：	72.40 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hand Tap Series, Super Hard Hand Tap, OTT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	60.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread G (55°)

  CARMEX

  Threading can be performed for both internal and external threads with a single pass.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	88.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series NC-Planet Cutters WX-PNC

  OSG

  Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	158.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

  OSG

  The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	101.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread Metric Screw (ISO)

  CARMEX

  Enables internal threading to be performed in a single pass.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.
  

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread BSPT

  CARMEX

  For both internal and external threading.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Tapered End Mill

  CARMEX

  [Features]
  · Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
  · Increases the service life of solid carbide type mill threads or mill thread tips.
  · Equal and proper load will be applied to the cutting edge of the mill thread cutter.
  · By applying taper shape pre-processing, the machining time of the mill thread is shortened

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	119.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Jet Mini Mill Thread for Aircraft MJ

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

  Select to compare

  Configure now
  Starting from∗ ：	217.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

  CARMEX

  For both internal and external threading
  
  [Features]
  · Ultrafine particle carbide and new type three-layer PVD coating

  Select to compare

  Configure now
  Starting from∗ ：	208.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Hand Tap Series, for Resin, EX-PLA-HT

  OSG

  Primarily suited for heat hardened resins such as phenol (Bakelite), epoxy, urea, melamine.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT

  OSG

  Suitable for massive tapping of aluminum alloy castings by high precision automatic machine

  Select to compare

  Configure now
  Starting from∗ ：	66.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series MC-Planet Cutters PNGT

  OSG

  Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

  Select to compare

  Configure now
  Starting from∗ ：	205.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

  OSG

  By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.

  Select to compare

  Configure now
  Starting from∗ ：	165.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Taper Tap OT-TPT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	133.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	162.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	133.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT

  OSG

  In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.

  Select to compare

  Configure now
  Starting from∗ ：	121.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT

  OSG

  In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.

  Select to compare

  Configure now
  Starting from∗ ：	148.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MMTS Micro Threading Tool

  NS TOOL

  Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	100.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread Unified Screw (UN)

  CARMEX

  For internal threading.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread NPT

  CARMEX

  For both inner/outer diameter threads.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread NPTF

  CARMEX

  For both inner/outer diameter threads.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole ISO

  CARMEX

  Metric thread / for I.D.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mill Thread G (55°) Solid Carbide with Oil Hole

  CARMEX

  Whitworth screw, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole BSPT

  CARMEX

  BSPT thread, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole UN

  CARMEX

  For unified screws and inner diameter screws.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPT

  CARMEX

  NPT thread, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPS

  CARMEX

  Internal and external use inch shank.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPSF

  CARMEX

  Inch shank for both inner and outer diameters.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole PG

  CARMEX

  For both internal and external diameters.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	390.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole ISO

  CARMEX

  For metric I.D. thread.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	263.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole BSPT

  CARMEX

  For both internal and external threading.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	305.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole BSW

  CARMEX

  For both internal and external threading.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	263.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

  CARMEX

  For internally threaded metric screws.
  
  [Features]
  · For thread cutting deep, large diameter holes.
  · With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
  · Stable processing without causing chatter is possible.
  · Deep hole drilling can be performed with one pass.
  · Blade length is shorter, so cutting resistance decreases.
  · Able to thread long blade lengths of up to 3D

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

  CARMEX

  For internally threaded unified screws.
  
  [Features]
  · For thread cutting deep, large diameter holes.
  · With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
  · Stable processing without causing chatter is possible.
  · Deep hole drilling can be performed with one pass.
  · Blade length is shorter, so cutting resistance decreases.
  · Able to thread long blade lengths of up to 3D

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid for Outer Diameter, Mill Thread ISO

  CARMEX

  Metric thread / for O.D. thread.
  
  [Features]
  · The spiral blade enables a clean finish.
  · Machining time is reduced by using three to six flutes

  Select to compare

  Configure now
  Starting from∗ ：	342.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid for Outer Diameter, Mill Thread UN

  CARMEX

  For unified screws and outer diameter screws.
  
  [Features]
  · The spiral blade enables a clean finish.
  · Machining time is reduced by using three to six flutes

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini Mill Thread G55°

  CARMEX

  For both G (55°) inner and outer diameter thread (MT7).
  
  [Features]
  · Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
  · Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
  · Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
  · Because high-speed cutting can be performed, machining time is shortened.
  · The blade length is short (3 ridges), so cutting load is not applied.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · Enables thread cutting of difficult-to-cut and high hardness materials.

  Select to compare

  Configure now
  Starting from∗ ：	211.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Jet Mini Mill Thread for Aircraft UNJ

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

  Select to compare

  Configure now
  Starting from∗ ：	213.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

  CARMEX

  With internal coolant hole, up to screw depth D1 x 2.
  
  [Features]
  · 3 functions with one tool. (drilling + threading + chamfering).
  · Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
  · Drilling tools are not required.
  · High-performance tools shorten the cycle time and reduce the machining costs.
  · Can be used for both blind holes and through holes.
  · Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
  · Thread processing with finished blade can be performed.
  · Both right-handed and left-handed threads can be processed with the same tool.

  Select to compare

  Configure now
  Starting from∗ ：	298.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

  CARMEX

  With internal coolant hole, up to screw depth D1 x 2.
  
  [Features]
  · 3 functions with one tool. (drilling + threading + chamfering).
  · Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
  · Drilling tools are not required.
  · High-performance tools shorten the cycle time and reduce the machining costs.
  · Can be used for both blind holes and through holes.
  · Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
  · Thread processing with finished blade can be performed.
  · Both right-handed and left-handed threads can be processed with the same tool.

  Select to compare

  Configure now
  Starting from∗ ：	304.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...