Screw-Hole-Related Tools

Search by sub-category

658

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Promotional pricing

Taper Tap Series for Pipes General Applications TPT

OSG

For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT

YAMAWA MFG

A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.87 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.45 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap HT (Cutting Tap)

YAMAWA MFG

Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	18.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

YAMAWA MFG

Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, for General, HT

OSG

High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.29 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	7.97 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

OSG

Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap for Stainless Steel SU+SP / SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.73 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	23.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

Hand Tap - Metric Fine Thread Screw

SKC

[Features]
It can be used for engraving thread grooves of fine threads.
[Features]
For right-hand threads.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.92 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Tap for Ultra High Hardness Steel UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Select to compare

Configure now
Starting from^∗ ：	102.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultrafine particle carbide and new type three-layer PVD coating

Select to compare

Configure now
Starting from^∗ ：	208.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	24.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Point Tap

TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

MISUMI

[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Hand Tap

MISUMI

[Features]
-Hand taps made from uncoated carbide
-Can be used for both blind holes and through holes
-Suitable for mass production of taps for various cast irons.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.63 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	6 Days

S-XPF, HSSE forming tap for through & blind holes, G (BSP)

OSG

For general steels, stainless steels and aluminum

Select to compare

Configure now
Starting from^∗ ：	75.10 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

A-XPF, Powder metal forming tap for through & blind holes, Metric

OSG

High speed tapping in general steels, aluminum, stainless steels - Powder metal for long tool life

Select to compare

Configure now
Starting from^∗ ：	56.30 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Promotional pricing

Drill Tap Series Spiral Taps with Drills V-DR-SFT

OSG

For Through Hole Machining Only

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, for Stainless Steel, EX-SUS-HT

OSG

Suited for machining stainless steel, heat-resistant steel, and nickel manganese steel. Cut carbon steel and alloy steel as well.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.49 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Taper Tap Series for Pipes Spiral Fluted SFT-TPT

OSG

It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.

Select to compare

Configure now
Starting from^∗ ：	24.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Broken Tap Extractor Set

Broken Tap Extractor Set【5-7 Pieces Per Package】

TRUSCO NAKAYAMA

[Characteristics]
When a tap breaks during work, this tool can be used to easily remove taps that have broken with damaging the screw threads.
Because a special steel string is used for the claw, it features a high twisting strength and does not break easily. It also easily removes taps that have become deeply sunk in or broken.
Even if the claw becomes damaged, it can be used many times until it becomes short. Also offers easy replacement of spare nails, making it extremely economic.
Especially for use with hand taps.
[Use]
For removal of bent hand taps.

Select to compare

Configure now
Starting from^∗ ：	158.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Nickel Base Alloy ZEN-B

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

Select to compare

Configure now
Starting from^∗ ：	53.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

S-POT 7G, HSSE spiral-point cutting tap for through holes, Metric

OSG

General purpose tapping in steels and stainless steels - For 7G internal thread tolerance

Select to compare

Configure now
Starting from^∗ ：	20.40 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Tap tool kit

REX TOOLS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.28 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

OSG

Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Planet Cutter Series NC-Planet Cutters WX-PNC

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	158.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Set (for metric screws / HSS-E)

TRUSCO NAKAYAMA

[Characteristics]
Can be used for both through holes and blind holes.
High-speed steel (HSS-E) tap set.
Work materials: general steel, low to medium carbon steel, alloy steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap - Products for DIY

SKC

Threaded part has an outstanding finish

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.91 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hexagonal Re-Threading Die

SKC

Nut used to rethread bolts. Attaches to a wrench for hex nuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.12 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Short Spiral Tap for Stainless Steel SU-S-SP

YAMAWA MFG

[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

Select to compare

Configure now
Starting from^∗ ：	17.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap PO(N-PO)

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.26 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Short Spiral Tap for Deep Holes S-SP

YAMAWA MFG

Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare
Brand	OSG	YAMAWA MFG	OSG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	SANDVIK	SKC	OSG	YAMAWA MFG	CARMEX	OSG	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	OSG	YAMAWA MFG	NACHI(FUJIKOSHI)	OSG	REX TOOLS	OSG	OSG	OSG	TRUSCO NAKAYAMA	SKC	SKC	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Taper Tap Series for Pipes General Applications TPT	For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT	Point Tap Series, for General, EX-POT	Hand Tap HT (Cutting Tap)	Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP	Hand Tap Series, for General, HT	Spiral Tap Series, General Purpose EX-SFT	Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT	Spiral Tap for Stainless Steel SU+SP / SU-SP	Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM	A Tap Series Point Tap Long Shank A-LT-POT	SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes	Hand Tap - Metric Fine Thread Screw	A Tap Series, Spiral Tap, A-SFT	Carbide Tap for Ultra High Hardness Steel UH-CT	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】	Carbide Hand Tap	Spiral Tap Series, V Coated, V-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	Groove-Free Tap Series VP New Roll VP-NRT	S-XPF, HSSE forming tap for through & blind holes, G (BSP)	A-XPF, Powder metal forming tap for through & blind holes, Metric	Drill Tap Series Spiral Taps with Drills V-DR-SFT	Hand Tap Series, for Stainless Steel, EX-SUS-HT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	Taper Tap Series for Pipes Spiral Fluted SFT-TPT	Groove-Free Tap Series, Tin Coated, TIN-NRT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	Broken Tap Extractor Set【5-7 Pieces Per Package】	A Tap Series for Pipes Point Tap A-POT	Spiral Tap for Nickel Base Alloy ZEN-B	SG Spiral Tap SGSP	S-POT 7G, HSSE spiral-point cutting tap for through holes, Metric	Tap tool kit	Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT	Planet Cutter Series NC-Planet Cutters WX-PNC	Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT	Hand Tap Set (for metric screws / HSS-E)	Hand Tap - Products for DIY	Hexagonal Re-Threading Die	Short Spiral Tap for Stainless Steel SU-S-SP	Point Tap PO(N-PO)	Short Spiral Tap for Deep Holes S-SP
Starting from^∗	17.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	39.87 € *Unit price with basic configuration	7.45 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.10 € *Unit price with basic configuration	15.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.29 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.97 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	83.15 € *Unit price with basic configuration	12.73 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.88 € *Unit price with basic configuration Volume Discount	23.65 € *Unit price with basic configuration	-	13.92 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	16.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	102.84 € *Unit price with basic configuration	208.52 € *Unit price with basic configuration	24.50 € *Unit price with basic configuration	14.00 € *Unit price with basic configuration Volume Discount	34.46 € *Unit price with basic configuration Volume Discount	17.63 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.81 € *Unit price with basic configuration Volume Discount	- Volume Discount	75.10 € *Unit price with basic configuration	56.30 € *Unit price with basic configuration	51.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.49 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.17 € *Unit price with basic configuration	17.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.43 € *Unit price with basic configuration	158.24 € *Unit price with basic configuration	15.94 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	53.56 € *Unit price with basic configuration	20.40 € *Unit price with basic configuration	74.28 € *Unit price with basic configuration Volume Discount	26.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	158.30 € *Unit price with basic configuration Volume Discount	24.43 € *Unit price with basic configuration	33.24 € *Unit price with basic configuration	10.91 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.12 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	17.85 € *Unit price with basic configuration	15.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	12.65 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	8 Days	Same day	6 Days	Same day	Same day	Same day	6 Days	Same day	6 Days	6 Days	5 Days	Same day	Same day	6 Days	5 Days	6 Days	5 Days	5 Days	Same day	6 Days	6 Days	2 Days	2 Days	Same day	Same day	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	2 Days	3 Days	Same day	6 Days	6 Days	6 Days	Same day	Same day	6 Days	Same day	6 Days
Specifications				Stock			Stock
Screw Types	Taper for Pipe	Taper for Pipe	Meter / Unified / Whitworth / Sewing Machine	Unified	Meter	Meter / Unified / Whitworth / Sewing Machine	Meter / Unified	Meter	Meter / Unified	Sewing Machine	Meter	Meter / Unified / Whitworth	Meter	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Unified / Whitworth	Meter / Unified	-	-	Meter	Meter	Meter	Taper for Pipe	Meter / Unified	Meter / Unified	-	Meter / Unified	Meter	Meter	-	-	Meter	Meter / Unified / Taper for Pipe	Meter	Meter	Meter	Meter	Meter	Meter / Unified	Meter
Screw size (Nominal)	R1 ～ R7/8	1´-11 ～ 3/4-14	No0UN ～ M48	No.10-24UNC	M3 ～ M16	No0UN ～ M35	1UN ～ M56	M2 ～ M20	No.10-32UNF ～ M30	SM1/4 ～ SM15/64	M2 ～ M24	G 1" ～ M64	M5 ～ M36	1-8UNC ～ M56	M2 ～ M20	-	M2 ～ M24	M3 ～ M10	M3 ～ M10	M2 ～ M16	1UN ～ M42	M1 ～ M12	-	-	M4	M3	M1.4 ～ M48	R1 ～ R3/8	No0UN ～ M20	M1 ～ M12	-	1/2-20UNF ～ M24	M3 ～ M12	M8 ～ M12	-	M3 ～ M14	M3 ～ M12	-	M3 ～ M12	M5 ～ M8	M2.6 ～ M10	M3 ～ M24	M3 ～ M14	No.10-32UNF ～ M24	M2 ～ M30
Pitch (P), Number of Threading(mm)	11 ～ 28	-	0.25 ～ 80	-	0.5 ～ 2	0.25 ～ 80	0.25 ～ 48	0.4 ～ 2.5	0.4 ～ 3.5	20 ～ 56	0.25 ～ 3	-	0.5 ～ 2	0.25 ～ 5.5	0.4 ～ 2.5	-	0.25 ～ 3	0.5 ～ 1.5	0.5 ～ 1.5	0.4 ～ 2	0.4 ～ 48	0.25 ～ 56	-	-	0.7	0.5	0.3 ～ 5	11 ～ 28	0.25 ～ 80	0.25 ～ 56	-	0.25 ～ 3	0.5 ～ 1.75	0.75 ～ 1.5	-	-	0.5 ～ 1.75	1 ～ 28	0.5 ～ 1.75	0.8 ～ 1.25	0.45 ～ 1.5	0.5 ～ 3	0.5 ～ 2	0.75 ～ 2	0.4 ～ 3.5
Chamfer threads (Lcf)	2.5P	2.5P	5P	5P	3P	1.5P ～ 9P	2.5P ～ 3P	3P	2.5P	2.5P	5P	-	1.5P ～ 9P	1.5P ～ 2.5P	5P	-	2.5P	5 P	1.5 P ～ 3 P	2.5P	2.5P ～ 3P	2P ～ 4P	-	-	2.5P	1.5P	5P	2.5P	2P ～ 4P	2P ～ 4P	-	5P	3P	2.5	-	-	2.5P ～ 5P	-	2P ～ 4P	-	5P	-	2.5P	5P	2.5P
Tool Material Type	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Carbide	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	-	-	Powder high-speed steel / Vanadium High-Speed Steel	Carbide	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	-	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	-	Powder high-speed steel	Powder high-speed steel	Alloy HSS	-	-	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	High-speed steel	-	-	High-speed steel	High-speed steel	High-speed steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Hardness Steel (50-60 HRC)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Hardness Steel (50-60 HRC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	-	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]
Tap Type	Tap for pipes	Tap for pipes	Point tap	Hand Tap	Spiral Tap	Hand Tap	Spiral Tap	Hand Tap	Spiral Tap	Spiral Tap	Point tap	-	Hand Tap	Spiral Tap	Point tap	Thread cutter	Spiral Tap	Point tap	Hand Tap	Spiral Tap	Spiral Tap	Roll tap	-	-	Spiral Tap	Hand Tap	Point tap	Tap for pipes	Roll tap	Roll tap	Modification/removal Tool	Point tap	Spiral Tap	Spiral Tap	-	-	Hand Tap	Thread cutter	Roll tap	Hand Tap	Hand Tap	Die	Spiral Tap	Point tap	Spiral Tap
Hole type	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	-	-	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	-	-	-	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	-	For through hole	For blind hole	For through hole / For blind hole	-	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	For blind hole	For through hole	For blind hole
Coating Y/N	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available	N/A	N/A	Available	-	-	Available	Available	Available	Available	Available	N/A	Available	N/A	Available	-	-	N/A	N/A	N/A	N/A	Available	Available	-	Available	N/A	Available	-	-	Available	Available	Available	N/A	-	-	N/A	N/A	N/A
Coating Type	Non-Coated	-	Non-Coated	-	-	Non-Coated	Non-Coated	TiCN / Other	-	Non-Coated	Other	-	-	Other	TiAlN	Nitriding Treatment	Other	TiN	-	Other	Non-Coated	TiCN	-	-	TiCN	Non-Coated	Non-Coated	Non-Coated	TiN	TiCN	-	Other	-	TiCN	-	-	TiCN	TiAlN	TiN	Non-Coated	-	-	-	-	-
Overall Length (L)(mm)	55 ～ 170	55 ～ 95	30 ～ 185	60	46 ～ 95	30 ～ 145	30 ～ 205	40 ～ 105	42 ～ 135	42 ～ 65	80 ～ 200	16 ～ 315	-	34 ～ 250	40 ～ 105	39 ～ 58	80 ～ 200	46 ～ 150	46 ～ 75	40 ～ 95	40 ～ 175	30 ～ 82	-	-	65	46	34 ～ 185	55 ～ 95	30 ～ 105	60 ～ 200	-	34 ～ 120	46 ～ 82	82	-	-	46 ～ 82	60 ～ 120	80 ～ 150	60 ～ 70	-	-	46 ～ 88	60 ～ 120	42 ～ 135