Înregistrați-vă
Criterii de filtrare

Ștergeți tot

  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Tool Material Type
  • work material

Thread Cutters (Screw size (Nominal): M12)

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.
    • Tap tool kit
      • Volume Discount

      REX TOOLS

      Tap tool kit

      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      -M3 ~ M14-------
      Preț normal (fără TVA):
      74.28 €
      Dată de expediere normală:
      3 zile lucrătoare
      Configurare
    • Thread repair kit
      • Volume Discount

      REX TOOLS

      Thread repair kit

      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      -M5 ~ M12-------
      Preț normal (fără TVA):
      142.01 €
      Dată de expediere normală:
      3 zile lucrătoare
      Configurare
    • TS Coated Carbide Threading Cutter, for Internal Metric Threads
      • Volume Discount

      MISUMI

      TS Coated Carbide Threading Cutter, for Internal Metric Threads

      [Features] --Tungsten carbide thread cutter for stable high speed machining-Can be used for both blind holes and through holes--It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Citiți mai mult
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableFor High Hardness (Silicon Group)
      Preț normal (fără TVA):
      214.08 €
      Dată de expediere normală:
      5 zile lucrătoare
      Configurare
    • Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

        OSG

        Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

        A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity
        Citiți mai mult
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
        MeterM121.75CarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Thread cutterFor blind holeAvailableTiAlN
        Preț normal (fără TVA):
        552.50 €
        Dată de expediere normală:
        6 zile lucrătoare
        Configurare
      • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

        Threading cutters that enable the high-speed stable processing are available at special prices
        Citiți mai mult
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
        MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
        Preț normal (fără TVA):
        149.22 €
        Dată de expediere normală:
        5 zile lucrătoare
        Configurare
      • Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

          GUHRING

          Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

          [Features]· Threading is performed with helical cutting.· If the pitch is the same, one unit can process threads with different diameters.· Both right-handed and left-handed female threads can be machined.
          Citiți mai mult
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
          MeterM121.75Carbide-Thread cutterFor through hole / For blind holeAvailableTiCN
          Preț normal (fără TVA):
          269.48 €
          Dată de expediere normală:
          8 zile lucrătoare
          Configurare
        • MTZ Jet Mill Thread with Oil Hole ISO

            CARMEX

            MTZ Jet Mill Thread with Oil Hole ISO

            For metric I.D. thread.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.
            Citiți mai mult
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
            MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
            Preț normal (fără TVA):
            404.89 €
            Dată de expediere normală:
            5 zile lucrătoare
            Configurare
          • Die metric
            • Volume Discount

            REX TOOLS

            Die metric

            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
            -M12-------
            Preț normal (fără TVA):
            10.05 €
            Dată de expediere normală:
            3 zile lucrătoare
            Configurare
          • Die tool kit
            • Volume Discount

            REX TOOLS

            Die tool kit

            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
            -M3 ~ M12-------
            Preț normal (fără TVA):
            34.44 €
            Dată de expediere normală:
            3 zile lucrătoare
            Configurare
          • SANDVIK CoroMill Plura Solid Carbide End Mill for Thread Milling

              SANDVIK

              SANDVIK CoroMill Plura Solid Carbide End Mill for Thread Milling

              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
              MeterM121------
              Preț normal (fără TVA):
              387.69 €
              Dată de expediere normală:
              5 zile lucrătoare
              Configurare
            • DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
              • Volume Discount

              MISUMI

              DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

              [Features] -Carbide thread cutter for stable high speed machining-Can be used for both blind holes and through holes-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.
              Citiți mai mult
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
              MeterM121.75CarbideDuctile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Thread cutterFor through hole / For blind holeAvailableDLC
              Preț normal (fără TVA):
              160.81 €
              Dată de expediere normală:
              5 zile lucrătoare
              Configurare
            • TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
              • Volume Discount

              MISUMI

              TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

              The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
              Citiți mai mult
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
              MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
              Preț normal (fără TVA):
              347.87 €
              Dată de expediere normală:
              7 zile lucrătoare
              Configurare
            • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
              • Volume Discount

              MISUMI

              TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

              [Features] -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible-Reduced cutting load due to short flute length (3 webs)-Enables effective thread cutting right into the corners of blind holes.
              Citiți mai mult
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
              MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
              Preț normal (fără TVA):
              301.02 €
              Dată de expediere normală:
              7 zile lucrătoare
              Configurare
            • Planet Cutter Series Super Planet DR-PNAC

                OSG

                Planet Cutter Series Super Planet DR-PNAC

                A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity
                Citiți mai mult
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                MeterM121.25 ~ 1.75CarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Thread cutterFor through hole / For blind holeAvailableTiAlN
                Preț normal (fără TVA):
                512.42 €
                Dată de expediere normală:
                6 zile lucrătoare
                Configurare
              • Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

                  GUHRING

                  Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

                  [Features]· Threading is performed with helical cutting.· If the pitch is the same, one unit can process threads with different diameters.· Both right-handed and left-handed female threads can be machined.
                  Citiți mai mult
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                  MeterM121.75Carbide-Thread cutterFor through hole / For blind holeAvailableTiCN
                  Preț normal (fără TVA):
                  382.91 €
                  Dată de expediere normală:
                  24 zile lucrătoare
                  Configurare
                • Carbide Solid Mill Thread Metric Screw (ISO)

                    CARMEX

                    Carbide Solid Mill Thread Metric Screw (ISO)

                    Enables internal threading to be performed in a single pass.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                    Citiți mai mult
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                    MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Thread cutterFor blind holeAvailableTiAlN
                    Preț normal (fără TVA):
                    273.20 €
                    Dată de expediere normală:
                    5 zile lucrătoare
                    Configurare
                  • Carbide Solid Mill Thread with Oil Hole ISO

                      CARMEX

                      Carbide Solid Mill Thread with Oil Hole ISO

                      Metric thread / for I.D.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                      Citiți mai mult
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                      MeterM121.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                      Preț normal (fără TVA):
                      410.60 €
                      Dată de expediere normală:
                      5 zile lucrătoare
                      Configurare
                    • Slim Head Type Hard Cut MTH ISO

                        CARMEX

                        Slim Head Type Hard Cut MTH ISO

                        [Features]· For mini mill thread type hard cuts, we have developed an innovative tool capable of threading high hardness materials up to HRC 62 in one pass.· Shortens machining time because the same tool can be used for thread cutting and chamfering.· Compatible with relatively large diameters.· The unique coating technology demonstrates excellent resistance to abrasion and heat.· Excellent carbide grade which also handles hardened steel.· Cutting chips are reduced, providing machining stability.· The cycle time is short, increasing productivity.· Supports screw depths up to twice the machining thread diameter.
                        Citiți mai mult
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                        MeterM121.75CarbideTool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                        Preț normal (fără TVA):
                        459.56 €
                        Dată de expediere normală:
                        5 zile lucrătoare
                        Configurare
                      • Die guide bush
                        • Volume Discount

                        REX TOOLS

                        Die guide bush

                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                        -M12-------
                        Preț normal (fără TVA):
                        3.44 €
                        Dată de expediere normală:
                        3 zile lucrătoare
                        Configurare
                      • CNC tapping head
                        • Volume Discount

                        REX TOOLS

                        CNC tapping head

                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                        -M3 ~ M12-------
                        Preț normal (fără TVA):
                        14.89 €
                        Dată de expediere normală:
                        3 zile lucrătoare
                        Configurare
                      • Die metric (precision)
                        • Volume Discount

                        REX TOOLS

                        Die metric (precision)

                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                        -M12 ~ M12 x 1.5-------
                        Preț normal (fără TVA):
                        20.32 €
                        Dată de expediere normală:
                        3 zile lucrătoare
                        Configurare
                      • Hand tap set
                        • Volume Discount

                        REX TOOLS

                        Hand tap set

                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                        -M12-------
                        Preț normal (fără TVA):
                        20.32 €
                        Dată de expediere normală:
                        3 zile lucrătoare
                        Configurare