Înregistrați-vă
Criterii de filtrare

Ștergeți tot

  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Tool Material Type
  • work material
  • Producător

Thread Cutters (Screw size (Nominal): M2.2)

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.
    • TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

      The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
      Citiți mai mult
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      MeterM2.20.45CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
      Preț normal (fără TVA):
      222.23 €
      Dată de expediere normală:
      7 zile lucrătoare
      Configurare
    • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

      [Features] -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible-Reduced cutting load due to short flute length (3 webs)-Enables effective thread cutting right into the corners of blind holes.
      Citiți mai mult
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      MeterM2.20.45CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
      Preț normal (fără TVA):
      181.78 €
      Dată de expediere normală:
      7 zile lucrătoare
      Configurare