Înregistrați-vă
Criterii de filtrare

Ștergeți tot

  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Tool Material Type
  • work material

Thread Cutters (Coating Type: For High Hardness (Silicon Group))

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.
    • TS Coated Carbide Threading Cutter, for Internal Metric Threads
      • Volume Discount

      MISUMI

      TS Coated Carbide Threading Cutter, for Internal Metric Threads

      [Features] --Tungsten carbide thread cutter for stable high speed machining-Can be used for both blind holes and through holes--It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Citiți mai mult
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      MeterM3 ~ M120.5 ~ 1.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailableFor High Hardness (Silicon Group)
      Preț normal (fără TVA):
      181.83 €
      Dată de expediere normală:
      5 zile lucrătoare
      Configurare
    • Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
      • Volume Discount

      OSG

      Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

      The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin
      Citiți mai mult
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
      Meter-0.4CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Thread cutterFor through hole / For blind holeAvailableFor High Hardness (Silicon Group)
      Preț normal (fără TVA):
      139.70 €
      Dată de expediere normală:
      6 zile lucrătoare
      Configurare