Înregistrați-vă
Criterii de filtrare

Ștergeți tot

  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Tool Material Type
  • work material

Thread Cutters (work material: Low-Carbon Steel (carbon alloy less than 0.25%))

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.
    • Carbide Solid Mill Thread with Oil Hole PG

        CARMEX

        Carbide Solid Mill Thread with Oil Hole PG

        For both internal and external diameters.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
        Citiți mai mult
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
        Other--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
        Preț normal (fără TVA):
        390.01 €
        Dată de expediere normală:
        5 zile lucrătoare
        Configurare
      • TS Coated Carbide Threading Cutter, for Internal Metric Threads
        • Volume Discount

        MISUMI

        TS Coated Carbide Threading Cutter, for Internal Metric Threads

        [Features] --Tungsten carbide thread cutter for stable high speed machining-Can be used for both blind holes and through holes--It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
        Citiți mai mult
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
        MeterM3 ~ M120.5 ~ 1.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎]Thread cutterFor through hole / For blind holeAvailableFor High Hardness (Silicon Group)
        Preț normal (fără TVA):
        181.83 €
        Dată de expediere normală:
        5 zile lucrătoare
        Configurare
      • Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
        • Volume Discount

        OSG

        Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

        The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin
        Citiți mai mult
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
        Meter / Unified-0.25 ~ 32CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableFor High Hardness (Silicon Group) / Other
        Preț normal (fără TVA):
        101.50 €
        Dată de expediere normală:
        6 zile lucrătoare
        Configurare
      • Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

          OSG

          Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

          By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.
          Citiți mai mult
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
          Meter-0.5 ~ 3CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
          Preț normal (fără TVA):
          165.90 €
          Dată de expediere normală:
          6 zile lucrătoare
          Configurare
          • Volume Discount

          CARMEX

          Carbide Solid Tapered End Mill

          [Features]· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.· Increases the service life of solid carbide type mill threads or mill thread tips.· Equal and proper load will be applied to the cutting edge of the mill thread cutter.· By applying taper shape pre-processing, the machining time of the mill thread is shortened
          Citiți mai mult
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
          Taper for Pipe--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutter-AvailableNitriding Treatment
          Preț normal (fără TVA):
          119.87 €
          Dată de expediere normală:
          5 zile lucrătoare
          Configurare
        • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
          • Volume Discount

          MISUMI

          TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

          Threading cutters that enable the high-speed stable processing are available at special prices
          Citiți mai mult
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
          MeterM3 ~ M200.5 ~ 2.5CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎]Thread cutterFor through hole / For blind holeAvailableTiAlN
          Preț normal (fără TVA):
          112.49 €
          Dată de expediere normală:
          5 zile lucrătoare
          Configurare
        • MMTS Micro Threading Tool
          • Volume Discount

          NS TOOL

          MMTS Micro Threading Tool

          Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken
          Citiți mai mult
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
          OtherS0.1 ~ S1.40.025 ~ 0.3CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎]Thread cutter-AvailableTiAlN
          Preț normal (fără TVA):
          100.28 €
          Dată de expediere normală:
          6 zile lucrătoare
          Configurare
        • Mill Thread G (55°) Solid Carbide with Oil Hole

            CARMEX

            Mill Thread G (55°) Solid Carbide with Oil Hole

            Whitworth screw, I.D./O.D. common type.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
            Citiți mai mult
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
            Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
            Preț normal (fără TVA):
            273.20 €
            Dată de expediere normală:
            5 zile lucrătoare
            Configurare
          • MTZ Jet Mill Thread with Oil Hole ISO

              CARMEX

              MTZ Jet Mill Thread with Oil Hole ISO

              For metric I.D. thread.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.
              Citiți mai mult
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
              MeterM6 ~ M201 ~ 2.5CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
              Preț normal (fără TVA):
              263.46 €
              Dată de expediere normală:
              5 zile lucrătoare
              Configurare
            • Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

                CARMEX

                Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

                For internally threaded metric screws.[Features]· For thread cutting deep, large diameter holes.· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.· Stable processing without causing chatter is possible.· Deep hole drilling can be performed with one pass.· Blade length is shorter, so cutting resistance decreases.· Able to thread long blade lengths of up to 3D
                Citiți mai mult
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                Meter-1 ~ 4CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
                Preț normal (fără TVA):
                349.53 €
                Dată de expediere normală:
                5 zile lucrătoare
                Configurare
              • Mini Mill Thread G55°

                  CARMEX

                  Mini Mill Thread G55°

                  For both G (55°) inner and outer diameter thread (MT7).[Features]· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.· Because high-speed cutting can be performed, machining time is shortened.· The blade length is short (3 ridges), so cutting load is not applied.· Can be used to cut the effective thread up to the edge of blind holes.· Enables thread cutting of difficult-to-cut and high hardness materials.
                  Citiți mai mult
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                  Whitworth--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                  Preț normal (fără TVA):
                  211.31 €
                  Dată de expediere normală:
                  5 zile lucrătoare
                  Configurare
                • TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                  The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
                  Citiți mai mult
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                  MeterM2 ~ M120.4 ~ 1.75CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
                  Preț normal (fără TVA):
                  222.23 €
                  Dată de expediere normală:
                  7 zile lucrătoare
                  Configurare
                • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                  [Features] -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible-Reduced cutting load due to short flute length (3 webs)-Enables effective thread cutting right into the corners of blind holes.
                  Citiți mai mult
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                  MeterM1.4 ~ M200.3 ~ 2.5CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎]Thread cutterFor through hole / For blind holeAvailableTiAlN
                  Preț normal (fără TVA):
                  181.78 €
                  Dată de expediere normală:
                  7 zile lucrătoare
                  Configurare
                • Planet Cutter Series MC-Planet Cutters PNGT

                    OSG

                    Planet Cutter Series MC-Planet Cutters PNGT

                    Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.
                    Citiți mai mult
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                    Meter / Taper for Pipe / Parallel for Pipes-1 ~ 19Cobalt HSSLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableTiN
                    Preț normal (fără TVA):
                    205.83 €
                    Dată de expediere normală:
                    6 zile lucrătoare
                    Configurare
                  • Planet Cutter Series NC-Planet Cutters WX-PNC
                    • Volume Discount

                    OSG

                    Planet Cutter Series NC-Planet Cutters WX-PNC

                    Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.
                    Citiți mai mult
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                    Meter / Unified / Taper for Pipe-1 ~ 28CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableTiAlN
                    Preț normal (fără TVA):
                    158.30 €
                    Dată de expediere normală:
                    6 zile lucrătoare
                    Configurare
                  • Carbide Solid Mill Thread Metric Screw (ISO)

                      CARMEX

                      Carbide Solid Mill Thread Metric Screw (ISO)

                      Enables internal threading to be performed in a single pass.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                      Citiți mai mult
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                      MeterM3 ~ M270.5 ~ 3CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableTiAlN
                      Preț normal (fără TVA):
                      229.39 €
                      Dată de expediere normală:
                      5 zile lucrătoare
                      Configurare
                    • Carbide Solid Mill Thread G (55°)

                        CARMEX

                        Carbide Solid Mill Thread G (55°)

                        Threading can be performed for both internal and external threads with a single pass.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                        Citiți mai mult
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                        Parallel for Pipes-11 ~ 28CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                        Preț normal (fără TVA):
                        229.39 €
                        Dată de expediere normală:
                        5 zile lucrătoare
                        Configurare
                      • Carbide Solid Mill Thread Unified Screw (UN)

                          CARMEX

                          Carbide Solid Mill Thread Unified Screw (UN)

                          For internal threading.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                          Citiți mai mult
                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                          Unified--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                          Preț normal (fără TVA):
                          229.39 €
                          Dată de expediere normală:
                          5 zile lucrătoare
                          Configurare
                        • Carbide Solid Mill Thread BSPT

                            CARMEX

                            Carbide Solid Mill Thread BSPT

                            For both internal and external threading.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                            Citiți mai mult
                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                            Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                            Preț normal (fără TVA):
                            229.39 €
                            Dată de expediere normală:
                            5 zile lucrătoare
                            Configurare
                          • Carbide Solid Mill Thread NPT

                              CARMEX

                              Carbide Solid Mill Thread NPT

                              For both inner/outer diameter threads.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                              Citiți mai mult
                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                              Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                              Preț normal (fără TVA):
                              229.39 €
                              Dată de expediere normală:
                              5 zile lucrătoare
                              Configurare
                            • Carbide Solid Mill Thread NPTF

                                CARMEX

                                Carbide Solid Mill Thread NPTF

                                For both inner/outer diameter threads.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                Citiți mai mult
                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                Preț normal (fără TVA):
                                229.39 €
                                Dată de expediere normală:
                                5 zile lucrătoare
                                Configurare
                              • Carbide Solid Mill Thread with Oil Hole ISO

                                  CARMEX

                                  Carbide Solid Mill Thread with Oil Hole ISO

                                  Metric thread / for I.D.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                  Citiți mai mult
                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                  MeterM4 ~ M240.5 ~ 3CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                  Preț normal (fără TVA):
                                  229.39 €
                                  Dată de expediere normală:
                                  5 zile lucrătoare
                                  Configurare
                                • Carbide Solid Mill Thread with Oil Hole BSPT

                                    CARMEX

                                    Carbide Solid Mill Thread with Oil Hole BSPT

                                    BSPT thread, I.D./O.D. common type.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                    Citiți mai mult
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                    Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                    Preț normal (fără TVA):
                                    273.20 €
                                    Dată de expediere normală:
                                    5 zile lucrătoare
                                    Configurare
                                  • Carbide Solid Mill Thread with Oil Hole UN

                                      CARMEX

                                      Carbide Solid Mill Thread with Oil Hole UN

                                      For unified screws and inner diameter screws.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                      Citiți mai mult
                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                      Unified--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                      Preț normal (fără TVA):
                                      273.20 €
                                      Dată de expediere normală:
                                      5 zile lucrătoare
                                      Configurare
                                    • Carbide Solid Mill Thread with Oil Hole NPT

                                        CARMEX

                                        Carbide Solid Mill Thread with Oil Hole NPT

                                        NPT thread, I.D./O.D. common type.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                        Citiți mai mult
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                        Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                        Preț normal (fără TVA):
                                        273.20 €
                                        Dată de expediere normală:
                                        5 zile lucrătoare
                                        Configurare
                                      • Carbide Solid Mill Thread with Oil Hole NPS

                                          CARMEX

                                          Carbide Solid Mill Thread with Oil Hole NPS

                                          Internal and external use inch shank.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                          Citiți mai mult
                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                          Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                          Preț normal (fără TVA):
                                          273.20 €
                                          Dată de expediere normală:
                                          5 zile lucrătoare
                                          Configurare
                                        • Carbide Solid Mill Thread with Oil Hole NPSF

                                            CARMEX

                                            Carbide Solid Mill Thread with Oil Hole NPSF

                                            Inch shank for both inner and outer diameters.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                                            Citiți mai mult
                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                            Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                            Preț normal (fără TVA):
                                            273.20 €
                                            Dată de expediere normală:
                                            5 zile lucrătoare
                                            Configurare
                                          • MTZ Jet Mill Thread with Oil Hole BSPT

                                              CARMEX

                                              MTZ Jet Mill Thread with Oil Hole BSPT

                                              For both internal and external threading.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.
                                              Citiți mai mult
                                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                              Parallel for Pipes--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
                                              Preț normal (fără TVA):
                                              305.88 €
                                              Dată de expediere normală:
                                              5 zile lucrătoare
                                              Configurare
                                            • MTZ Jet Mill Thread with Oil Hole BSW

                                                CARMEX

                                                MTZ Jet Mill Thread with Oil Hole BSW

                                                For both internal and external threading.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.
                                                Citiți mai mult
                                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                Whitworth--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
                                                Preț normal (fără TVA):
                                                263.46 €
                                                Dată de expediere normală:
                                                5 zile lucrătoare
                                                Configurare
                                              • For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

                                                  CARMEX

                                                  For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

                                                  For internally threaded unified screws.[Features]· For thread cutting deep, large diameter holes.· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.· Stable processing without causing chatter is possible.· Deep hole drilling can be performed with one pass.· Blade length is shorter, so cutting resistance decreases.· Able to thread long blade lengths of up to 3D
                                                  Citiți mai mult
                                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                  Unified--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
                                                  Preț normal (fără TVA):
                                                  349.53 €
                                                  Dată de expediere normală:
                                                  5 zile lucrătoare
                                                  Configurare
                                                • Carbide Solid for Outer Diameter, Mill Thread ISO

                                                    CARMEX

                                                    Carbide Solid for Outer Diameter, Mill Thread ISO

                                                    Metric thread / for O.D. thread.[Features]· The spiral blade enables a clean finish.· Machining time is reduced by using three to six flutes
                                                    Citiți mai mult
                                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                    Meter-1 ~ 2CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutter-AvailableNitriding Treatment
                                                    Preț normal (fără TVA):
                                                    342.45 €
                                                    Dată de expediere normală:
                                                    5 zile lucrătoare
                                                    Configurare
                                                  • Carbide Solid for Outer Diameter, Mill Thread UN

                                                      CARMEX

                                                      Carbide Solid for Outer Diameter, Mill Thread UN

                                                      For unified screws and outer diameter screws.[Features]· The spiral blade enables a clean finish.· Machining time is reduced by using three to six flutes
                                                      Citiți mai mult
                                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                      Unified--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutter-AvailableNitriding Treatment
                                                      Preț normal (fără TVA):
                                                      349.53 €
                                                      Dată de expediere normală:
                                                      5 zile lucrătoare
                                                      Configurare
                                                    • Jet Mini Mill Thread for Aircraft UNJ

                                                        CARMEX

                                                        Jet Mini Mill Thread for Aircraft UNJ

                                                        It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.
                                                        Citiți mai mult
                                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                        Other--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                                        Preț normal (fără TVA):
                                                        213.39 €
                                                        Dată de expediere normală:
                                                        5 zile lucrătoare
                                                        Configurare
                                                      • Jet Mini Mill Thread for Aircraft MJ

                                                          CARMEX

                                                          Jet Mini Mill Thread for Aircraft MJ

                                                          It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.
                                                          Citiți mai mult
                                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                          Other--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                                          Preț normal (fără TVA):
                                                          217.83 €
                                                          Dată de expediere normală:
                                                          5 zile lucrătoare
                                                          Configurare
                                                        • Carbide Solid Mill Thread, No Finishing Flute 60°

                                                            CARMEX

                                                            Carbide Solid Mill Thread, No Finishing Flute 60°

                                                            It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.
                                                            Citiți mai mult
                                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                            Meter--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                                            Preț normal (fără TVA):
                                                            208.53 €
                                                            Dată de expediere normală:
                                                            5 zile lucrătoare
                                                            Configurare
                                                          • DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

                                                              CARMEX

                                                              DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

                                                              With internal coolant hole, up to screw depth D1 x 2.[Features]· 3 functions with one tool. (drilling + threading + chamfering).· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.· Drilling tools are not required.· High-performance tools shorten the cycle time and reduce the machining costs.· Can be used for both blind holes and through holes.· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.· Thread processing with finished blade can be performed.· Both right-handed and left-handed threads can be processed with the same tool.
                                                              Citiți mai mult
                                                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                              Meter-1 ~ 2CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
                                                              Preț normal (fără TVA):
                                                              298.23 €
                                                              Dată de expediere normală:
                                                              5 zile lucrătoare
                                                              Configurare
                                                            • DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

                                                                CARMEX

                                                                DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

                                                                With internal coolant hole, up to screw depth D1 x 2.[Features]· 3 functions with one tool. (drilling + threading + chamfering).· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.· Drilling tools are not required.· High-performance tools shorten the cycle time and reduce the machining costs.· Can be used for both blind holes and through holes.· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.· Thread processing with finished blade can be performed.· Both right-handed and left-handed threads can be processed with the same tool.
                                                                Citiți mai mult
                                                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                                Unified--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor through hole / For blind holeAvailableNitriding Treatment
                                                                Preț normal (fără TVA):
                                                                304.42 €
                                                                Dată de expediere normală:
                                                                5 zile lucrătoare
                                                                Configurare
                                                              • MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

                                                                  CARMEX

                                                                  MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

                                                                  For both internal and external threading[Features]· Ultrafine particle carbide and new type three-layer PVD coating
                                                                  Citiți mai mult
                                                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                                  Meter--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                                                  Preț normal (fără TVA):
                                                                  208.52 €
                                                                  Dată de expediere normală:
                                                                  5 zile lucrătoare
                                                                  Configurare
                                                                • MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters

                                                                    CARMEX

                                                                    MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters

                                                                    For both internal and external threading[Features]· Ultra-fine particle carbide with an advanced three layer PVD blue coating
                                                                    Citiți mai mult
                                                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                                    Meter--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                                                    Preț normal (fără TVA):
                                                                    208.52 €
                                                                    Dată de expediere normală:
                                                                    5 zile lucrătoare
                                                                    Configurare
                                                                  • MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

                                                                      CARMEX

                                                                      MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

                                                                      Metric thread / for I.D. thread[Features]· Ultra-fine particle carbide with an advanced three layer PVD blue coating
                                                                      Citiți mai mult
                                                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                                      MeterM1 ~ M30.25 ~ 0.5CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableNitriding Treatment
                                                                      Preț normal (fără TVA):
                                                                      212.85 €
                                                                      Dată de expediere normală:
                                                                      5 zile lucrătoare
                                                                      Configurare
                                                                    • Thread Cutting Tool (for Unified Threads) MMTU

                                                                        NS TOOL

                                                                        Thread Cutting Tool (for Unified Threads) MMTU

                                                                        [Features]・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.・ Adopts MUGEN Coating Premium for the realization of a long life.・ For Unified Standard threads
                                                                        Citiți mai mult
                                                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Tool Material Typework materialTap TypeHole typeCoating Y/NCoating Type
                                                                        UnifiedNO.0-80UNF ~ 1/4-20UNC-CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○]Thread cutterFor blind holeAvailableTiAlN
                                                                        Preț normal (fără TVA):
                                                                        108.22 €
                                                                        Dată de expediere normală:
                                                                        6 zile lucrătoare
                                                                        Configurare