Jigs for Manual Tightening（Page 5）

?* Information on days to ship and prices

• 

  Ballpoint Jack

  NABEYA

  The point contact enables quick centering and support with black scale surfaces.

  Select to compare

  Configure now
  Starting from∗ ：	196.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Magnetic Jack

  NABEYA

  The main body has a built-in magnet and can be used for both horizontal and vertical machines. Lightweight as it is made of aluminum.

  Select to compare

  Configure now
  Starting from∗ ：	418.57 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Screw Jack Locknut

  NABEYA

  S45C/quenched HRC35±4 screw jack locknut.

  Select to compare

  Configure now
  Starting from∗ ：	36.03 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Small Base

  NABEYA

  [Features]
  · Mounting base for Nut Runner small model.
  · It consists of three blocks.
  · The height can be changed depending on the combination.
  · Mounting bolts, connection bolts (hex socket bolts) included

  Select to compare

  Configure now
  Starting from∗ ：	332.06 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Small Model

  NABEYA

  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Use Nut Runner for speedy clamping.
  · Clamp cover rotates 90 degrees (rotation direction can be chosen).
  · Free from troubles such as oil leakage as it does not use oil.

  Select to compare

  Configure now
  Starting from∗ ：	616.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamp Bar for Nut Runner Clamp Small Model

  NABEYA

  [Features]
  · Clamp bar for Nut Runner small model.
  · With hex socket set screws for positioning (rod tip).
  · NRCS-03C/06C/10C: Can be used immediately after purchase.
  · NRCSS-03CS/06CS/10CS: A material type to be processed by the customer

  Select to compare

  Configure now
  Starting from∗ ：	161.63 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Height Setting Jack (with Magnetic Base)

  NABEYA

  [Features]
  · Hole included in upper center (φ12).
  · Attachment for E-756 jack can also be used.
  · Bearing is embedded in thread component.
  · Includes magnetic base

  Select to compare

  Configure now
  Starting from∗ ：	730.05 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Injeck Clamp

  NABEYA

  [Features]
  · The body is made of bainite cast iron and does not get damaged even in excessive tightening.
  · Can also be used for metal press clamps and the metal working clamps of injection molding machines.
  · If a T-slot nut is used, then of course it can also be used with T-groove tables

  Select to compare

  Configure now
  Starting from∗ ：	44.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Injeck Clamp Q Model

  NABEYA

  Mold bases can be clamped very fast. Clamp and step block are connected so they will not become lost. Opened clamp slot allows easy insertion and removal from the side.

  Select to compare

  Configure now
  Starting from∗ ：	79.77 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Screw Jack

  NABEYA

  · Attachment for No. E-9175A can be used for SJK type.
  · SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  Select to compare

  Configure now
  Starting from∗ ：	40.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Point Jack

  NABEYA

  Convenient for positioning narrow workpiece parts, or as a stopper, etc. Nuts are included for all products.

  Select to compare

  Configure now
  Starting from∗ ：	14.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Block

  NABEYA

  Material is Gusseisen mit Kugelgraphit450, and heat treatment is yakizen.
  Useful for bulking up large workpieces and as a clamp table.

  Select to compare

  Configure now
  Starting from∗ ：	544.52 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Locate Plate

  NABEYA

  Material is EN 1.1206 Equiv., Heat treatment is hardening, Surface treatment is black oxide coating.
  Helps with positioning.

  Select to compare

  Configure now
  Starting from∗ ：	116.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stopper Block

  NABEYA

  For positioning the workpiece, pushing laterally, etc.

  Select to compare

  Configure now
  Starting from∗ ：	35.09 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Guide Block (Straight Type)【2 Pieces Per Package】

  NABEYA

  Can be used where the groove width of the fixed object and table is the same. When the groove width is different, use the E-605 guide block (stepped) and E-275B guide block.

  Select to compare

  Configure now
  Starting from∗ ：	52.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locating Pin Type B with Grip

  NABEYA

  SUM22/quenched HRC locating pin B with grip.

  Select to compare

  Configure now
  Starting from∗ ：	40.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Straight Pin

  NABEYA

  Slight chamfering is given for φ3 to φ5 and chamfering of C0.3 to 0.5 for φ6 or higher.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Cylinder

  NABEYA

  SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.

  Select to compare

  Configure now
  Starting from∗ ：	31.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flange Locating Pin (Round

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Select to compare

  Configure now
  Starting from∗ ：	87.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Reference Seat (Flange Provided)

  NABEYA

  [Features]
  · Specification with air holes can be used to verify seating (O-ring not included).
  · The diameter of the workpiece support is large, allowing load from the top to be firmly supported

  Select to compare

  Configure now
  Starting from∗ ：	64.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Reference Seat (Air Hole with Flange Provided)

  NABEYA

  Specification with air holes can be used to verify seating (O-ring not included). The seating diameter is small, thanks to a space-saving design that makes it possible to use in narrow places.

  Select to compare

  Configure now
  Starting from∗ ：	89.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Reference Seat (Round Seat)

  NABEYA

  Material is EN 1.7264 Equiv., Heat treatment is Hardening HRC60±3, and Surface treatment is black oxide coating, Standard seat (round seat).

  Select to compare

  Configure now
  Starting from∗ ：	66.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Eccentric Rough Guide

  NABEYA

  A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.

  Select to compare

  Configure now
  Starting from∗ ：	18.27 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rough Guide L-Plate for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Extension Tool for Q Lock (Side Type)

  NABEYA

  Main body: S45C / Hex joint: SCM440, Hexagonal joint part: Hardened HRC52 to 58 / Joint bar (double-end surface): Induction hardened HRC36 to 44, Q-lock element side operated type extension tool.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	101.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rough Guide for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Select to compare

  Configure now
  Starting from∗ ：	130.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rough Guide L-Plate for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.

  Select to compare

  Configure now
  Starting from∗ ：	44.24 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Clamp Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Select to compare

  Configure now
  Starting from∗ ：	133.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Clamp Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Select to compare

  Configure now
  Starting from∗ ：	119.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Diamond Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Select to compare

  Configure now
  Starting from∗ ：	168.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Locating Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Select to compare

  Configure now
  Starting from∗ ：	145.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Locating Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Select to compare

  Configure now
  Starting from∗ ：	131.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock Coupling Socket

  NABEYA

  A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.

  Select to compare

  Configure now
  Starting from∗ ：	178.16 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Q Lock Coupling Plug

  NABEYA

  A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.

  Select to compare

  Configure now
  Starting from∗ ：	210.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Q Lock Fast Tightening Clamp Pin

  NABEYA

  Q-lock element clamp pin (quick feed type).

  Select to compare

  Configure now
  Starting from∗ ：	130.25 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Q Lock Fast Tightening Diamond Pin

  NABEYA

  Q-lock element diamond pin (quick feed type).

  Select to compare

  Configure now
  Starting from∗ ：	147.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock Fast Tightening Locating Pin

  NABEYA

  Q-lock element locating pin (quick feed type).

  Select to compare

  Configure now
  Starting from∗ ：	143.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Cylinder for Q Lock

  NABEYA

  Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.

  Select to compare

  Configure now
  Starting from∗ ：	55.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rough Guide for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Select to compare

  Configure now
  Starting from∗ ：	86.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rough Guide Pin for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Select to compare

  Configure now
  Starting from∗ ：	47.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjusting Stopper Pin

  NABEYA

  SUM22/black oxide finished adjustable stopper pin.

  Select to compare

  Configure now
  Starting from∗ ：	55.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjustment Stop

  NABEYA

  For stoppers. Rotation Stopper

  Select to compare

  Configure now
  Starting from∗ ：	116.75 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Guide Block (Stepped Type)【2 Pieces Per Package】

  NABEYA

  It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.

  Select to compare

  Configure now
  Starting from∗ ：	104.73 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locating Pin Type A with Grip

  NABEYA

  SUM22/quenched HRC locating pin A with grip.

  Select to compare

  Configure now
  Starting from∗ ：	53.27 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Bar Plate (T-Groove) Type

  NABEYA

  S50C/quenched HRC50 +5/0 bar plate (T groove type).

  Select to compare

  Configure now
  Starting from∗ ：	1,412.33 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

Loading...