Hammers（Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Copper Hammer Replacement Head
OHINDUSTRIAL
The body section of the copper hammer is made of whiteheart malleable cast iron that has been heat treated, so there is no distortion of the handle hole, and the handle is unlikely to break.- Volume Discount
Configure nowStarting from∗ ： 21.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
G Kappa Hammer
OHINDUSTRIAL
[Features]
· This uses a glass fiber handle and therefore it reduces handle breakage when it is used under extreme work conditions.
· Copper hammer with a replaceable head.
[Applications]
· For hard striking when installing jigs, repairing machines, and manufacturing dies.- Volume Discount
Configure nowStarting from∗ ： 110.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
LightOn copper hammer
OHINDUSTRIAL
[Features]
Head material: rolled copper
Handle material: polypropylene (PP)
-Handle material: soft PVC (PVC).- Volume Discount
Configure nowStarting from∗ ： 79.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
O.H.Industrial Copper Hammer
OHINDUSTRIAL
[Features]
Long life as the head is made of wrought copper and not heat-processed and viscous.
- The product life is 2 times longer than cast copper hammers.
[Applications]
For installing/removing aluminum sash frames.- Volume Discount
Configure nowStarting from∗ ： 49.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
LightOn brass hammer
OHINDUSTRIAL
[Features]
Double-molded polypropylene handle fits close to the hand for easy grip, increasing work efficiency.
- The head part is made of brass and then better in striking force and durability than copper hammers.
[Applications]
For installing/removing aluminum sash frames.- Volume Discount
Configure nowStarting from∗ ： 72.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 103.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 223.56 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
- Promotional pricing
Rubber Hammer
OHINDUSTRIAL
[Features]
Examine the good-quality rubber having an excellent durability before use.
- Does not peel off even when scratched with nails.
[Applications]
- For light work.- Volume Discount
Configure nowStarting from∗ ： 18.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
LightOn set W hammer
OHINDUSTRIAL
[Features]
Double-molded polypropylene handle fits close to the hand for easy grip, increasing work efficiency.
[Applications]
For construction and civil engineering work in general.- Volume Discount
Configure nowStarting from∗ ： 34.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
LightOn cross-pen hammer
OHINDUSTRIAL
[Features]
Hard to bend, it is made of supple special polypropylene.
- Provides the same weight balance as a wooden handle.
- A sticking grip fitting to hands and absorbing shocks.
- Safe without rattling or braking.- Volume Discount
Configure nowStarting from∗ ： 36.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Sheet Metal Hammer (Horizontal Distribution)
OHINDUSTRIAL
[Features]
· The rotating and tilting head mechanism keeps the striking surface from indenting.
[Applications]
· Used for automobile sheet metal, sheet metal for ducts/tube making, and stainless steel sheet metal.- Volume Discount
Configure nowStarting from∗ ： 165.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
G Urethane Mallet
OHINDUSTRIAL
[Features]
· It is commonly used in general construction.
[Applications]
· Overall construction work.- Volume Discount
Configure nowStarting from∗ ： 270.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Green Electrical Wrench Hammer
OHINDUSTRIAL
[Features]
· Economic design made short and lightweight.
· It has a grip design which firmly fits the hand.
· 17 mm box wrench at the end of the handle.
[Applications]
· Ideal for electrical work.- Volume Discount
Configure nowStarting from∗ ： 65.39 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Stainless Test Hammer
OHINDUSTRIAL
[Features]
It is a well-balanced design with an emphasis on a feel transmitted to the hand.- Volume Discount
Configure nowStarting from∗ ： 122.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Wooden Handle for One Hand Hammer
OHINDUSTRIAL
[Features]
-Good quality oak with a moisture content of less than 14% is used.
-Handle material: oak.- Volume Discount
Configure nowStarting from∗ ： 9.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wooden Handle for Double Box End Large Hammer
OHINDUSTRIAL
[Features]
· It uses high-quality oak with moisture content of 14% or less.- Volume Discount
Configure nowStarting from∗ ： 50.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wooden Handle for Soft Hammer
OHINDUSTRIAL
[Features]
-Good quality oak with moisture content less than 14% is used.
-Handle material: oak.- Volume Discount
Configure nowStarting from∗ ： 36.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wooden Handle for Shockless Hammer
OHINDUSTRIAL
[Features]
-Good quality oak with a moisture content of less than 14% is used.
-Handle material: oak.- Volume Discount
Configure nowStarting from∗ ： 19.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stone Blade Wood Pattern
OHINDUSTRIAL
[Features]
-The material for the stone blade hammer is oak.
-Product type: Wooden hammer
-Handle material: oak.- Volume Discount
Configure nowStarting from∗ ： 13.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 116.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Single-handed hammer (wooden handle)
TRUSCO NAKAYAMA
[Features]
• The head part is completely tempered (hardness is 50 to 55 degrees). The handle is also lighter and more durable than oak, and uses a flexible hickory.
[Applications]
• For general ironworking.
• For driving stamps, marks and punches.- Volume Discount
Configure nowStarting from∗ ： 12.84 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Double-ended hammer (glass fiber handle)
TRUSCO NAKAYAMA
[Features]
- Excellent in durability and safety with a glass fiber handle.
- Has a soft grip which is hard to slip and hand friendly.
- The head part has been completely tempered.- Volume Discount
Configure nowStarting from∗ ： 53.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Urethane Shockless Hammer
TRUSCO NAKAYAMA
[Features]
- Specially molded with urethane resin and then excellent in durability.
- Covered by urethane resin and then absorbs impact and sound when striking.
- The striking surface hardness is 90 to 95 A.
- Integrally molded and then safe without handle breakage or head falling.
- Absorbs recoil because lead shots are contained inside.
[Applications]
- For the final assembly of wooden products or plastic products.
- To be used for striking or mounting iron plates or hardware.- Volume Discount
Configure nowStarting from∗ ： 52.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Urethane Soft Hammer Spare Head【2 Pieces Per Package】
TRUSCO NAKAYAMA
4 types of head diameter, 26, 32, 38 and 42, are available- Volume Discount
Configure nowStarting from∗ ： 9.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rolled Copper (Wooden Handle)
TRUSCO NAKAYAMA
[Features]
- A copper hammer where copper rolled products are processed.
- The copper part deforms less than casted hammers and then excellent in workability.
- The handle uses hickory which is lighter, more durable and elastic than oak.
- The purity of copper is 99 % or more and the hardness is 80 HRF.
- 3 times stronger than cast copper hammers and also can be used longer.
[Applications]
- When the impact surface should not be damaged or enough impact force can not be provided with a plastic hammer.- Volume Discount
Configure nowStarting from∗ ： 53.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wooden Hammer
TRUSCO NAKAYAMA
[Features]
- It is light and durable.
- Does not easily damage work objects.- Volume Discount
Configure nowStarting from∗ ： 15.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Welding crane hammer
TRUSCO NAKAYAMA
[Features]
• The head part is completely tempered (hardness is 50 to 55 degrees). The handle is also lighter and more durable than oak, and uses a flexible hickory.
[Use]
For removing slag and spattering of welding.- Volume Discount
Configure nowStarting from∗ ： 20.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Urethane Hammer (Glass Fiber Handle)
TRUSCO NAKAYAMA
[Features]
- Has a shock-less structure and provides excellent workability and strong striking force.
- Excellent in durability and safety with a glass fiber handle.
- Has a soft grip which is hard to slip and hand friendly.
- Oil resistant.
- The striking surface hardness is 90 to 95 A.
- The whole head is molded with high grade polyurethane resin and then there is a less risk of damaging objects when striking them.
[Applications]
- For general construction work.- Volume Discount
Configure nowStarting from∗ ： 117.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wooden Handle for Sheet Metal Hammer (with Wedge)
TRUSCO NAKAYAMA
[Features]
-Wooden handle with wedge for TRUSCO TSM sheet metal hammer.
-Compatible models: TSM-137, TSM-160, TSM-166.- Volume Discount
Configure nowStarting from∗ ： 15.94 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Recoilless Nylon Hammer
PB SWISS TOOLS
A hammer that fits better in the hand than those with a standard handle.
[Features]
· Weight of the hammer head determines the size.
· One side of the head is flat and the other side is round. It is securely fixed to the head part, while allowing easy replacement.
· When replacing, choose a size compatible with 300A (flat) or 300B (round).
· The head center is made sturdier than the types with normal sublenses inside.
· Head center: Steel, welded, blue lacquer finish.
· The handle is made of hickory wood certified by the FSC (Forest Stewardship Council).
[Applications]
· The disc is driven downwards with the impact, absorbing recoil. This allows accurate striking with maximum force.- Volume Discount
Configure nowStarting from∗ ： 74.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Recoilless Nylon Hammer (Glass Fiber Shaft)
PB SWISS TOOLS
Robust hammer made from glass fiber.
[Features]
· PB SWISS TOOLS hammers are robust and structurally extremely unique.
· Made of the highest grade glass fiber.
· Very long service life.
· Weight of the hammer head determines the size. It fits better in the hand than the hammer with a standard handle.
[Applications]
· The disc is driven downwards with the impact, absorbing recoil. This allows accurate striking with maximum force.Configure nowStarting from∗ ： 112.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Round Sledgehammer
CUSTOM KOBO
Easily gripped slip-resistant soft grip, with heat-processed pipe handle resistant to bending- Volume Discount
Configure nowStarting from∗ ： 13.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wooden Handle Double Face Row Hammer
CUSTOM KOBO
Optimal for general masonry work, stone crushing work and chipping work.- Volume Discount
Configure nowStarting from∗ ： 29.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Double Box End Hammer Handle
CUSTOM KOBO
Hammer handle for 2.7/3.6/4.5 kg double-sided hammers- Volume Discount
Configure nowStarting from∗ ： 23.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
G Fiber Handle Double Faced Hammer
SK 11
It includes protective rubber to protect the handle from chipping/damage.- Volume Discount
Configure nowStarting from∗ ： 59.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Urethane Shockless Hammer (Glass Fiber Handle)
SK 11
Urethane shockless hammer with 10 times the durability of a wooden mallet (comparison by manufacturer).
[Features]
· The small steel ball in the head absorbs shock to increase striking force.
[Applications]
· Can be used for impacting precision equipment and painted parts etc.- Volume Discount
Configure nowStarting from∗ ： 110.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shockless Hammer (Urethane)
SK 11
Recoilless hammer that does not bounce back.
[Features]
· Recoilless structure enables stronger striking force than conventional type and reduces fatigue.
[Applications]
· Can be used for impacting precision equipment and painted parts etc.- Volume Discount
Configure nowStarting from∗ ： 31.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel Glass Tip Cut Metal Hammer
SK 11
Head made of rust-resistant stainless steel.- Volume Discount
Configure nowStarting from∗ ： 16.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Work Gennou Hammer/Otafuku Mallet
SK 11
This is a mini size suitable for working with small articles.- Volume Discount
Configure nowStarting from∗ ： 15.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Replacement Head for "Micro Double-Ended Hammer" (Mini Type)
TRUSCO NAKAYAMA
Trusco made For Micro Both hammer exchange headConfigure nowStarting from∗ ： 4.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stethoscope 46909
SIGNET
[Features]
· Scope that allows the injector operating sounds and sounds from the engine and transmission to be clearly heard.
· 280 mm total length aluminum needle can easily access difficult-to-reach locations, and clearly capture fine noise.
· Can also be used for pressure-related and vacuum-related inspections if the needle is switched with the included rubber trumpetConfigure nowStarting from∗ ： 36.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Combination Hammer
SIGNET
[Features]
· With a steel head on one side and an urethane head on the other side, this one product achieves two functions.
· Replacement head is available (urethane only).- Volume Discount
Configure nowStarting from∗ ： 79.27 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Gel Grip Hammer / Plastic Head Hammer No.76-10
VESSEL
A hammer with a plastic head that does not damage workpieces and a gel-filled grip that absorbs impact.
[Features]
· Plastic head hammer.
· The gel grip specification greatly absorbs the shock to the palm while hammering. Reduces the burden to the wrists.
· Elastomer resin non-slip grip design.
· The head balance has been thoroughly emphasized. With solid impact sensation.
· The hammer head is screw type for easy replacement. Plastic head is available.
[Applications]
· Convenient for sash machining, molds, interior construction, bricks, and tiling.
· Capable of supporting a wide range of applications such as building materials, woodworking, vehicle maintenance, stone masonry, hobbies, etc.Configure nowStarting from∗ ： 22.54 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 24.83 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ball Pin Hammer
SMATO
[Features]
· Uses a rocket design in grip for slip prevention when working.
· Handle is made of beech wood.Configure nowStarting from∗ ： 20.53 € Min. Shipping Days ： 23 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Product Type |
| Head (diameter)(mm) |
| Head (length)(mm) |
| Overall Length(mm) |
| Head material |
| Part |
| Handle material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | OHINDUSTRIAL | TOMBO INDUSTRY | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | PB SWISS TOOLS | PB SWISS TOOLS | CUSTOM KOBO | CUSTOM KOBO | CUSTOM KOBO | SK 11 | SK 11 | SK 11 | SK 11 | SK 11 | TRUSCO NAKAYAMA | SIGNET | SIGNET | VESSEL | SMATO | SMATO |
| Product Series | Replacement Head for "Micro Double-Ended Hammer" (Mini Type) | ||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 21.85 € *Unit price with basic configuration Volume Discount | 110.90 € *Unit price with basic configuration Volume Discount | 79.51 € *Unit price with basic configuration Volume Discount | 49.41 € *Unit price with basic configuration Volume Discount | 72.02 € *Unit price with basic configuration Volume Discount | 103.95 € *Unit price with basic configuration Volume Discount | 223.56 € *Unit price with basic configuration | 18.25 € Special price *Unit price with basic configuration Promotional pricing | 34.91 € *Unit price with basic configuration Volume Discount | 36.12 € *Unit price with basic configuration Volume Discount | 165.62 € *Unit price with basic configuration Volume Discount | 270.65 € *Unit price with basic configuration Volume Discount | 65.39 € *Unit price with basic configuration Volume Discount | 122.94 € *Unit price with basic configuration Volume Discount | 9.88 € *Unit price with basic configuration Volume Discount | 50.05 € *Unit price with basic configuration Volume Discount | 36.32 € *Unit price with basic configuration Volume Discount | 19.20 € *Unit price with basic configuration Volume Discount | 13.29 € *Unit price with basic configuration Volume Discount | 116.14 € *Unit price with basic configuration Volume Discount | 12.84 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 53.19 € *Unit price with basic configuration Volume Discount | 52.21 € *Unit price with basic configuration Volume Discount | 9.27 € *Unit price with basic configuration Volume Discount | 53.61 € *Unit price with basic configuration Volume Discount | 15.86 € *Unit price with basic configuration Volume Discount | 20.63 € *Unit price with basic configuration Volume Discount | 117.90 € *Unit price with basic configuration Volume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 74.54 € *Unit price with basic configuration Volume Discount | 112.26 € *Unit price with basic configuration | 13.59 € *Unit price with basic configuration Volume Discount | 29.51 € *Unit price with basic configuration Volume Discount | 23.13 € *Unit price with basic configuration Volume Discount | 59.04 € *Unit price with basic configuration Volume Discount | 110.89 € *Unit price with basic configuration Volume Discount | 31.89 € *Unit price with basic configuration Volume Discount | 16.57 € *Unit price with basic configuration Volume Discount | 15.52 € *Unit price with basic configuration Volume Discount | 4.10 € *Unit price with basic configuration | 36.97 € *Unit price with basic configuration | 79.27 € *Unit price with basic configuration Volume Discount | 22.54 € *Unit price with basic configuration | 24.83 € *Unit price with basic configuration | 20.53 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | Same day | 5 Days | 5 Days | 7 Days | 4 Days | 23 Days |
| Product Type | Copper Hammer | Copper Hammer | Copper Hammer | Copper Hammer | Copper Hammer | - | Soft Hammer (Resin Head) | Rubber Hammer | Stonehead Hammer / Welding Hammer | Stonehead Hammer / Welding Hammer | Plate Metal Hammer | Kakeya | Electrician's hammer | Test Hammer | Wooden Hammer | Wooden Hammer | Wooden Hammer | Wooden Hammer | Wooden Hammer | Kakeya | Single-handed hammer | Double-ended hammer | Shockless hammer | Soft Hammer (Resin Head) | Copper Hammer | Wooden Hammer | Welding hammer | Kakeya | - | Shockless hammer | Shockless hammer | - | Double-ended hammer | - | Double-ended hammer | Shockless hammer | Shockless hammer | - | - | Part | Test Hammer | Double-ended hammer | Soft Hammer (Resin Head) | Part | Single-handed hammer |
| Head (diameter)(mm) | 25 ～ 53 | 30 ～ 63 | 25 ～ 43 | 20 ～ 43 | 25 ～ 30 | 25 | 32 | 57 | 36 | 33 | φ40 | 104 | 25 | 13 | - | - | - | - | - | 135 | 19.1 ～ 35.5 | 43 ～ 78 | 38 ～ 60 | 26 | 18.4 ～ 36.5 | 48 ～ 62 | - | 70 ～ 122 | - | 22 ～ 60 | 32 | 25 | 45 | - | 60 | 70 ～ 105 | 35 ～ 50 | 18 | 20 | - | - | - | 32 | - | 38 ～ 43 |
| Head (length)(mm) | - | 88 ～ 169 | 88 ～ 139 | 73 ～ 139 | 88 ～ 96 | 94 | 105 | 96 | 95 | 99 | 108 | 180 ～ 202 | 105 | 97 | - | - | - | - | - | 240 | 64.4 ～ 119.8 | 128 ～ 242 | 100 ～ 130 | - | 70 ～ 117 | 108 ～ 133 | 142 | 142 ～ 220 | - | 75 ～ 120 | 100 | 72 | 130 | - | 150 ～ 180 | - | 90 ～ 95 | 95 | 35 | - | - | - | 120 | - | 123 ～ 140 |
| Overall Length(mm) | - | 320 ～ 850 | 280 ～ 375 | 300 ～ 450 | 280 | 280 | 270 | 330 | 280 | 280 | 300 | 900 | 255 | 390 | - | - | - | - | - | 900 | 273 ～ 345 | 400 ～ 918 | 287 ～ 368 | - | 285 ～ 335 | 305 ～ 342 | 301 | 505 ～ 922 | - | 270 ～ 415 | 310 | 250 | 425 | 900 | 900 | 510 ～ 900 | 285 ～ 320 | 300 | 210 | - | 280 | 330 | 315 | - | 390 |
| Head material | Rolled Copper | - | Rolled Copper | Rolled Copper | Brass | Stainless Steel | - | - | - | Carbon Steel for Mechanical Structure S53C | Carbon copper | Urethane | Carbon copper | Stainless Steel | - | - | - | - | - | Other | Carbon copper | Carbon copper | Polyurethane (PU) | - | Rolled Copper | Other | Carbon copper | Polyurethane (PU) | - | Polyamide | Polyamide | Steel for construction | Steel for construction | - | - | Urethane | Urethane | Stainless Steel | - | - | - | Steel ～ Urethane | Resin | - | - |
| Part | Replacement Head | - | - | - | - | - | - | - | - | - | - | - | - | - | Handle | Handle | Handle | Handle | Handle | - | - | - | - | Replacement Head | - | - | - | - | Handle | - | - | - | - | - | - | - | - | - | - | Replacement Head | - | - | - | - | - |
| Handle material | - | Glass Fiber | Polypropylene (PP) | Oak | Polypropylene (PP) | Soft Polyvinyl Chloride (PVC) | - | Oak | Polypropylene (PP) | Polypropylene (PP) | Oak | Glass Fiber | - | Oak | Oak | Oak | Oak | Oak | Oak | Oak | Hickory | Polypropylene (PP) / Glass Fiber / Thermoplastic Rubber (TPR) | Thermoplastic Sulfonated Elastomer (TPV) | - | Hickory | Hickory | Hickory | Glass Fiber | Hickory | Hickory | Hickory | Pipe Steel | Oak | Hickory | Glass Fiber | Glass Fiber | Urethane | Oak | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Product Type
- Single-handed hammer
- Part
- Double-ended hammer
- Shockless hammer
- Soft Hammer (Resin Head)
- Rubber Hammer
- Copper Hammer
- Aluminum Hammer
- Wooden Hammer
- Stonehead Hammer / Welding Hammer
- Welding hammer
- Plate Metal Hammer
- Claw Hammer
- Woodworking Hammer
- Kakeya
- Electrician's hammer
- Test Hammer
- Nail
- Ball pin hammer
- Urethane Hammer
- Sledge Hammer
-
Head (diameter)(mm)
-
Head (length)(mm)
- 25
- 35
- 56
- 60
- 64.4
- 66
- 70
- 72
- 73
- 75
- 80
- 81
- 82
- 82.5
- 83
- 84
- 86
- 87
- 88
- 90
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 116.5
- 117
- 119
- 119.8
- 120
- 121
- 122
- 123
- 124
- 125
- 127
- 128
- 129
- 130
- 131
- 133
- 134
- 135
- 138
- 139
- 140
- 141
- 142
- 144
- 145
- 147
- 148
- 150
- 151
- 155
- 156
- 158
- 159
- 161
- 162
- 163
- 165
- 168
- 169
- 174
- 175
- 176
- 178
- 180
- 184
- 188
- 190
- 198
- 200
- 201
- 202
- 203
- 207
- 210
- 215
- 220
- 221
- 232
- 233
- 240
- 242
- 265
- 300
-
Overall Length(mm)
- 12
- 15
- 17
- 18
- 20
- 21
- 23
- 23.5
- 40
- 50
- 60
- 80
- 130～520
- 150
- 150～630
- 155
- 160
- 165
- 168
- 170
- 175
- 180
- 190～740
- 200
- 210
- 226
- 230
- 240
- 240～1190
- 245
- 250
- 250～1510
- 255
- 260
- 265
- 269
- 270
- 270～1530
- 273
- 275
- 280
- 285
- 287
- 290
- 292
- 295
- 300
- 300～2010
- 301
- 305
- 306
- 308
- 310
- 315
- 316
- 317
- 320
- 322
- 325
- 327
- 330
- 330～2020
- 335
- 340
- 342
- 345
- 350
- 353
- 355
- 360
- 365
- 368
- 370
- 375
- 380
- 385
- 390
- 400
- 405
- 410
- 415
- 420
- 425
- 430
- 440
- 450
- 490
- 505
- 510
- 520
- 530
- 560
- 600
- 620
- 700
- 765
- 780
- 800
- 820
- 850
- 860
- 880
- 890
- 892
- 897
- 900
- 902
- 910
- 915
- 918
- 920
- 922
- 1000
- 1040
- 1045
-
Head material
-
Part
-
Handle material
Brand
-
- HALDER (57)
- ESCO (47)
- OHINDUSTRIAL (44)
- WIHA (24)
- GEDORE (22)
- TRUSCO NAKAYAMA (12)
- HAZET (8)
- DOGYU INDUSTRIAL (7)
- PB SWISS TOOLS (7)
- MORIMITSU (5)
- SMATO (5)
- SK 11 (5)
- VESSEL (5)
- WERA (5)
- KTC(KYOTO TOOL) (4)
- MAEDAKINNZOKU (4)
- BAHCO (3)
- CUSTOM KOBO (3)
- MAEDA SHELL SERVICE (3)
- CIMCO (2)
- NORELEM (2)
- SIGNET (2)
- FACOM (2)
- AS ONE (1)
- BERNSTEIN AG (1)
- STANLEY (1)
- SHINWA RULES (1)
- TOMBO INDUSTRY (1)
CAD data type
-
- 2D
- 3D
Categories related to Hammers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Hexalobular Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter, rotary cutter, scalpel knife
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers, clamps, pliers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Caulking Tools
- Tools Used at Electric Facilities
-
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.