GANTER Lifting Eyebolts
?* Information on days to ship and prices
-
DIN 580 Lifting eye bolts, Steel
GANTER
These lifting eye bolts correspond to standard sheet DIN 580.
The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
Starting from∗ ： 2.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Lifting eye bolts (rotating), Steel
GANTER
The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 83.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lifting eye bolts, Stainless Steel A2
GANTER
The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
Starting from∗ ： 5.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lifting eye bolts (rotating), Stainless Steel
GANTER
Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 182.42 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Lifting eye bolts, Stainless Steel A4
GANTER
The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
Starting from∗ ： 11.80 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lifting eye nuts (rotating), Steel
GANTER
Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).
Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket nut cannot be removed from the ring.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 101.30 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Lifting eye nuts, Stainless Steel A2
GANTER
The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
Starting from∗ ： 5.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Lifting eye nuts, Steel
GANTER
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
Starting from∗ ： 2.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Lifting eye nuts, Stainless Steel A4
GANTER
The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
Starting from∗ ： 12.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Nominal (M) |
| Length L (mm) |
| Material |
| Tip Shape |
| Strength Class (Steel) |
| Thread Type |
| Sales Unit |
| Application |
| Technical Standard |
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | |||||||||
| CAD |
|
|
| ||||||
| Starting from∗ | 2.62 € *Unit price with basic configuration Volume Discount | 83.00 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 5.68 € *Unit price with basic configuration Volume Discount | 182.42 € *Unit price with basic configuration Volume Discount | 11.80 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 101.30 € *Unit price with basic configuration Volume Discount | 5.96 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.58 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 12.30 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | 7 Days | Same day | 7 Days | Same day | Same day | Same day |
| Screw Nominal (M) | M 8 ～ M 36 | M 6 ～ M 36 | M 8 ～ M 24 | M 12 ～ M 24 | M 10 ～ M 24 | M 8 ～ M 30 | M 8 ～ M 24 | M 8 ～ M 36 | M 10 ～ M 24 |
| Length L (mm) | - | - | - | - | - | - | - | - | - |
| Material | Steel | - | Stainless Steel | - | Stainless Steel | - | Stainless Steel | Steel | Stainless Steel |
| Tip Shape | - | - | - | - | - | - | - | - | - |
| Strength Class (Steel) | - | - | - | - | - | - | - | - | - |
| Thread Type | - | - | - | - | - | - | - | - | - |
| Sales Unit | - | - | - | - | - | - | - | - | - |
| Application | - | - | - | - | - | - | - | - | - |
| Technical Standard | DIN | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Nominal (M)
-
Length L (mm)
-
Material
-
Tip Shape
-
Flat End
-
-
Strength Class (Steel)
-
Thread Type
- Metric Coarse
-
Sales Unit
-
Application
Narrow search by specifying Brand
-
- NORELEM (12)
- HALDER (10)
- GANTER (9)
- KIPP (8)
- REYHER (6)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 1 Day or Less
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 7 Days or Less
Categories related to Lifting Eyebolts
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.