LAPP Contact Pins（Wire connection method：Crimp）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
EPIC® Contacts for circular connectors
LAPP
EPIC® contacts for M23, LS1, fits and is qualified- Volume Discount
Starting from∗ ： 0.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® H-D 1.6 stamped contacts
LAPP
With H-D 1.6 pressed contacts, handling is easy using the removal tool, crimping pliers and locator. For inserts and modules of the EPIC® rectangular connectors
Choice of high quality gold or silver plated contacts
2 crimp areas for wire and insulation crimp- Volume Discount
Starting from∗ ： 0.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® POWERLOCK Crimp contacts
LAPP
Benefits
· M12 threaded post contact for tube cable lug contact Contact drain for use with type A1
· contact source for use with design type A6 (depending on application either screw or crimp)
· Screw contact for easy-to-service connection without special tools Screw contact drain for use with type F6 S
· screw contact source for use with type D6 S Screw contacts are intended for conductor cross-sections up to 120 mm² For smaller conductor cross-sections up to 50 mm², a diameter reduction must be used
· Crimp contact ensures maximum contact reliability between the contact and the cable and establishes a vibration-resistant connection Different contact sizes available for conductor cross-sections from 35 to 240 mm² Crimp contact, drain for use with type F6 C
· crimp contact source for use with type D6 C
· All contacts are supplied with contact retention pin for fastening the contact to the panel-mount base
Application
· For use with unscreened single cores
· Withstands moderate mechanical stress
· Can be used for mobile and stationary power supply or emergency power supply via generators or battery storage systems
· Suitable for three-phase and direct current applications The maximum current strength in combination with screw contacts is 400 A
· the maximum current strength in combination with crimp contacts is 660 A
· Suitable for electric motors and cooling units- Volume Discount
Starting from∗ ： 50.82 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
EPIC® MC 3.6 machined contacts
LAPP
The machined contacts can be supplied in packaging units of 100 pieces as female or male pins. For inserts and modules of the EPIC® rectangular connectors
silver plated and passivated contacts- Volume Discount
Starting from∗ ： 1.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® MC 3.6 machined contacts 16 mm2
LAPP
The machined contacts for conductor cross-section 16 mm² are supplied in packaging units of 20 pieces. It is recommended to also order the crimping dies.For inserts and modules of the EPIC® rectangular connectorsCrimping contact for power modulessilver plated and passivated contacts- Volume Discount
Starting from∗ ： 3.53 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
EPIC® M-D 1.0 D-Sub stamped contacts-on-reel
LAPP
For inserts and modules of the EPIC® rectangular connectorsGold plated contacts in 2 quality levelsfor automated production with crimping machine2 crimp areas for wire and insulation crimp- Volume Discount
Starting from∗ ： 74.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® H-BE 2.5 machined contacts
LAPP
The machined contacts for rectangular connectors are available as female and male pins with various cross-section dimensions.For inserts and modules of the EPIC® rectangular connectorsChoice of high quality gold or silver plated contacts- Volume Discount
Starting from∗ ： 0.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® H-D 1.6 machined contacts
LAPP
Benefits
· Crimp termination creates a vibration-proof connection, provides maximum contact protection between the contact and cable and is suitable for automated assembly
· Suitable for conductor cross-sections from 014 to 250 mm²- Volume Discount
Starting from∗ ： 0.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® H-D 1.6 stamped contacts-on-reel
LAPP
The pressed contacts in ring are offered in variable variants for various conductor cross-sections and length of stripped insulation. For inserts and modules of the EPIC® rectangular connectors
Choice of high quality gold or silver plated contacts
for automated production with crimping machine
2 crimp areas for wire and insulation crimp- Volume Discount
Starting from∗ ： 90.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® M17 Contacts
LAPP
EPIC® M17 Contacts for the M17 circular connector series
Contacts, tools, accessories for circular connectors- Volume Discount
Starting from∗ ： 1.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® MC 2.5 machined contacts
LAPP
The machined contacts for conductor cross-section from 0.5 to 4 mm² are available as female and male pins. For inserts and modules of the EPIC® rectangular connectors
Choice of high quality gold or silver plated contacts- Volume Discount
Starting from∗ ： 1.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® MC 2.5 stamped contacts
LAPP
The pressed contacts for conductor cross-section from 0.5 to 2.5 mm² are available as female and male pins.For inserts and modules of the EPIC® rectangular connectorsChoice of high quality gold or silver plated contacts2 crimp areas for wire and insulation crimp- Volume Discount
Starting from∗ ： 0.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® MC 2.5 stamped contacts-on-reel
LAPP
The pressed contacts in ring are at 100 or 200 pieces, coiled on reel, for usage for conductor cross-section from 0.5 to 2.5 mm².For inserts and modules of the EPIC® rectangular connectorsChoice of high quality gold or silver plated contactsfor automated production with crimping machine2 crimp areas for wire and insulation crimp- Volume Discount
Starting from∗ ： 44.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® POWER LS1.5 Contacts female
LAPP
EPIC® POWER LS1.5 Contacts female for size 1.5 circular connector series
Contacts, tools, accessories for circular connectors
All contacts are high quality gold plated
Slotted contacts with external pressure spring- Volume Discount
Starting from∗ ： 2.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® POWER LS1.5 Contacts male
LAPP
EPIC® POWER LS1.5 Contacts female for size 1.5 circular connector series
Contacts, tools, accessories for circular connectors
All contacts are high quality gold plated
Slotted contacts with external pressure spring- Volume Discount
Starting from∗ ： 1.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® POWER LS3 female contacts
LAPP
EPIC® POWER LS3 female contacts for size 3 circular connector series
Contacts, tools, accessories for circular connectors
Only available as crimp version due to the high mechanical stress in servo applications
Power contacts silver plated, signal contacts gold plated- Volume Discount
Starting from∗ ： 3.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® POWER LS3 male contacts
LAPP
EPIC® POWER LS3 male contacts for size 3 circular connector series
Contacts, tools, accessories for circular connectors
Only available as crimp version due to the high mechanical stress in servo applications
Power contacts silver plated, signal contacts gold plated- Volume Discount
Starting from∗ ： 3.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
EPIC® Modular 10.0 machined contacts
LAPP
The modular crimping contacts 10.0 are suitable for maximum cross-sections and currents and their internal resistance is less than 1 milliohm.For inserts and modules of the EPIC® rectangular connectorsCrimping contacts for maximum cross sections and currentssilver plated and passivated contacts- Volume Discount
Starting from∗ ： 23.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Connector Shape |
| A/B/C |
| D/E/F |
| G/H/I |
| J/K/L |
| M/N/O |
| P/Q/R |
| S/T/U |
| V/W/X |
| Y and Z |
| Katakana |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP | LAPP |
| Product Series | ||||||||||||||||||
| Starting from∗ | 0.35 € *Unit price with basic configuration Volume Discount | 0.40 € *Unit price with basic configuration Volume Discount | 50.82 € *Unit price with basic configuration Volume Discount | 1.52 € *Unit price with basic configuration Volume Discount | 3.53 € *Unit price with basic configuration Volume Discount | 74.73 € *Unit price with basic configuration Volume Discount | 0.22 € *Unit price with basic configuration Volume Discount | 0.65 € *Unit price with basic configuration Volume Discount | 90.32 € *Unit price with basic configuration Volume Discount | 1.23 € *Unit price with basic configuration Volume Discount | 1.18 € *Unit price with basic configuration Volume Discount | 0.33 € *Unit price with basic configuration Volume Discount | 44.15 € *Unit price with basic configuration Volume Discount | 2.18 € *Unit price with basic configuration Volume Discount | 1.50 € *Unit price with basic configuration Volume Discount | 3.90 € *Unit price with basic configuration Volume Discount | 3.80 € *Unit price with basic configuration Volume Discount | 23.67 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | Same day | 5 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Connector Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| A/B/C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D/E/F | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| G/H/I | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| J/K/L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M/N/O | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| P/Q/R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| S/T/U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V/W/X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Y and Z | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Katakana | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number Of Cores | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Current(A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Voltage(V) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wire connection method | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp |
| Connection direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Protection function (environmentally resistant) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Representative Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Connector Shape
- Square shape
- Other
-
A/B/C
- CM10
- CE01
- Other
-
D/E/F
- Dsub
- EI
- EH
- EL
- Other
-
G/H/I
- Heavy duty
- Other
-
J/K/L
- JN1
- JL05
-
M/N/O
- MR
- NH
- MIL
- Other
-
P/Q/R
- PH
- PS
-
S/T/U
- SM
-
V/W/X
- XH
- VH
-
Y and Z
- Other
-
Katakana
- Dynamic
- Commercial MATE-N-LOK
- Mini Universal Mate-N-Lok
- Universal Mate-N-Lok
- Other
-
Number
- 5051/5045
- 1625
- Other
-
Applicable pin/contact
- Male (plug)
- Female (socket)
- Other
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
-
Wire connection method
- Solder
- Crimp
-
Connection direction
- Straight
- Angle
-
Protection function (environmentally resistant)
-
Representative Standard
Narrow search by specifying Brand
-
- MISUMI (19)
- MOLEX (38)
- TE CONNECTIVITY (26)
- LAPP (18)
- PHOENIX CONTACT (12)
- WEIDMUELLER (10)
- JAPAN AVIATION ELECTRONICS(JAE) (9)
- ILME (7)
- JST (JST MANUFACTURING) (7)
- HARTING (4)
- FUJIKURA (DDK) (3)
- HIROSE ELECTRONIC (3)
- HONDA TSUSHIN KOGYO (1)
- NICHIFU TERMINAL INDUSTRIES (1)
- NANABOSHI (1)
- SOURIAU (1)
- WAGO (0)
- LUMBERG (0)
- IFM ELECTRONIC (0)
- SCHLEGEL (0)
- HIRSCHMANN (0)
- MH CONNECTORS (0)
- PHOENIX CONTACT CONNECTOR TECHNOLOGY (0)
- SUMIKO TEC (0)
- EDAC (0)
- BULGIN (0)
- FISCHER ELEKTRONIK (0)
- BINDER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Contact Pins
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.