OSG Screw-Hole-Related Tools（Coating Type：Non-Coated Page 2）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Starting from∗ ： 14.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for Deep Holes, EX-DH-POT
OSG
Suitable for through holes with extra long threads and materials that easily suffer sticking.- Volume Discount
Starting from∗ ： 8.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for Difficult-to-Machine Material, CPM-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 9.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 40.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for Thin Plates, EX-SS-POT
OSG
Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes- Volume Discount
Starting from∗ ： 7.61 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT
OSG
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Starting from∗ ： 50.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT
OSG
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.- Volume Discount
Starting from∗ ： 29.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT
OSG
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Starting from∗ ： 52.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT
OSG
It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.Starting from∗ ： 24.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT
OSG
This type with a long shaft is used for machining tapered internal threads in pipes. It is suitable for difficult-to-cut materials such as stainless steel.Starting from∗ ： 40.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 29.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT
OSG
This is a short thread type used for machining tapered internal threads in pipes. It is suitable for blind holes with hard-to-cut materials such as stainless steel.Starting from∗ ： 31.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT
OSG
This is a short thread type used for machining tapered internal threads in pipes. It is suitable for hard-to-cut materials such as stainless steel.Starting from∗ ： 25.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT
OSG
This is a short thread, long shank type used for machining tapered internal threads. It is suitable for difficult-to-cut materials such as stainless steel.Starting from∗ ： 46.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Spiral Fluted SFT-TPT
OSG
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Starting from∗ ： 24.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT
OSG
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Starting from∗ ： 40.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT
OSG
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Starting from∗ ： 47.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT
OSG
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.- Volume Discount
Starting from∗ ： 26.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap OT-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Starting from∗ ： 133.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Starting from∗ ： 162.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Starting from∗ ： 133.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 29.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Starting from∗ ： 44.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT
OSG
Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forgingStarting from∗ ： 60.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 20.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Tap Series for Pipes New Roll Tap NRT-SPT
OSG
[Features] A new thread former with overall lengths of 65 mm and 80 mm.
[Features] It can be used for side mounting of pipe screws and deep hole machining.- Volume Discount
Starting from∗ ： 55.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Parallel Tap Series for Pipes General Applications Homo Processing H-SPT
OSG
It is a general-purpose tap for machining internal threads of parallel pipe threads.- Volume Discount
Starting from∗ ： 19.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT
OSG
In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.Starting from∗ ： 121.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT
OSG
In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.Starting from∗ ： 148.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series For Aluminum High Speed Synchronized Tap HS-AL-NRT
OSG
High precision female screw processing is done on aluminum and aluminum alloys without producing any chips.- Volume Discount
Starting from∗ ： 13.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series For Non-Ferrous Alloy B-HRT
OSG
Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.- Volume Discount
Starting from∗ ： 9.91 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Taper Tap Series for American Pipes for General Application (NPSF) SPT
OSG
Used for machining of parallel female pipe taper threads and female pipe parallel threadsStarting from∗ ： 30.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Nut Tap Series Nut Tap NT
OSG
Primarily for thread cutting on nuts. Takes the workability of nuts into consideration with a long screw thread section and shank section and is capable of continuous operation until the nuts fill the shank section.- Volume Discount
Starting from∗ ： 27.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Machining Center Tap Series, Short Type for Machining Centers, EX-S-MCT
OSG
With horizontal machining center, biting that is prone to chipping is easily controlled so the stable performance can be obtained.- Volume Discount
Starting from∗ ： 12.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Machining Center Tap Series, Long Shank Type for Machining Centers, EX-MCT
OSG
With horizontal machining center, biting that is prone to chipping is easily controlled so the stable performance can be obtained.- Volume Discount
Starting from∗ ： 33.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Parallel Series for Pipes For Stainless Steel EX-SUS-SPT
OSG
Suited for machining hard-to-cut materials such as stainless steel.- Volume Discount
Starting from∗ ： 20.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 46.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 85.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 114.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Starting from∗ ： 51.99 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 136.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 160.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 46.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 9.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Starting from∗ ： 12.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Point Tap Series, for Difficult-to-Machine Material, CPM-POT | Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT | Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT | Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT | Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT | Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT | Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT | Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-TPT | Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT | Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT | Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT | Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT | Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT | Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT | Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT | Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT | Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT | Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT | Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT | Parallel Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-SPT | Parallel Tap Series for Pipes General Applications Homo Processing H-SPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT | Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT | Groove-Free Tap Series For Aluminum High Speed Synchronized Tap HS-AL-NRT | Taper Tap Series for American Pipes for General Application (NPSF) SPT | Machining Center Tap Series, Short Type for Machining Centers, EX-S-MCT | Machining Center Tap Series, Long Shank Type for Machining Centers, EX-MCT | Screw Cutting Round Die Series, Parallel Screw Cutting Round Die for Pipes, SPD-S-PS | Screw Cutting Round Die Series, Parallel Screw Cutting Round Die Series for Pipes, SPD-S-NPS | Screw Cutting Round Die Series, Parallel Screw Cutting Round Die for Pipes, SPD-H | Screw Cutting Round Die Series, Screw Cutting Round Solid Dies for Stainless Steel, TPD-S-NPT | Screw Cutting Die Series, Tapered Screw Cutting Round Dies for Pipes, TPD-H-PT | Screw Cutting Die Series, Tapered Screw Cutting Round Dies for Pipes, TPD-H-NPT | Screw Cutting Round Die Series, Parallel Screw Cutting Round Die for Pipes, SPD-S-PF | Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W | Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L | |||||||||
| Starting from∗ | 14.02 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.49 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 40.05 € *Unit price with basic configuration Volume Discount | 7.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 50.57 € *Unit price with basic configuration | 29.40 € *Unit price with basic configuration Volume Discount | 52.87 € *Unit price with basic configuration | 24.17 € *Unit price with basic configuration | 40.55 € *Unit price with basic configuration | 29.78 € *Unit price with basic configuration | 31.28 € *Unit price with basic configuration | 25.37 € *Unit price with basic configuration | 46.86 € *Unit price with basic configuration | 24.17 € *Unit price with basic configuration | 40.55 € *Unit price with basic configuration | 47.66 € *Unit price with basic configuration | 26.27 € *Unit price with basic configuration Volume Discount | 133.79 € *Unit price with basic configuration | 162.75 € *Unit price with basic configuration | 133.79 € *Unit price with basic configuration | 29.98 € *Unit price with basic configuration Volume Discount | 44.76 € *Unit price with basic configuration Volume Discount | 60.18 € *Unit price with basic configuration | 20.93 € *Unit price with basic configuration Volume Discount | 55.97 € *Unit price with basic configuration Volume Discount | 19.68 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 121.33 € *Unit price with basic configuration | 148.20 € *Unit price with basic configuration | 13.52 € *Unit price with basic configuration Volume Discount | 9.91 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 30.94 € *Unit price with basic configuration | 27.21 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 12.91 € *Unit price with basic configuration Volume Discount | 33.74 € *Unit price with basic configuration | 20.81 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 46.65 € *Unit price with basic configuration Volume Discount | 85.49 € *Unit price with basic configuration Volume Discount | 114.83 € *Unit price with basic configuration | 51.99 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 136.50 € *Unit price with basic configuration | 160.88 € *Unit price with basic configuration | 46.65 € *Unit price with basic configuration Volume Discount | 9.74 € *Unit price with basic configuration Volume Discount | 12.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Meter / Unified | Parallel for Pipes | Meter | Meter | Meter | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Whitworth | Meter |
| Screw size (Nominal) | M2 ～ M36 | M2 ～ M16 | M1.4 ～ M48 | M8 ～ M12 | M1.4 ～ M12 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | G1/2 ～ G3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | R1/2 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | R1 ～ R3/8 | G1 ～ G3/8 | PF3/8 | G1/8 | G1/2 ～ G3/8 | G1/2 ～ G3/8 | M4 | No2UN ～ M6 | NPS1/16 | M6 ～ M12 | M8 | M10 ～ M12 | G1/4 ～ G1/8 | R1 ～ R7/8 | NPS1 ～ NPS3/8 | G1/2 ～ G3/8 | M4 ～ M10 | R1 ～ R3/8 | NPT1 ～ NPT3/8 | G1 ～ G7/8 | W1/8 | M3 ～ M30 |
| Pitch (P), Number of Threading(mm) | 0.4 ～ 4 | 0.4 ～ 2 | 0.3 ～ 5 | 1.25 ～ 1.75 | 0.3 ～ 1.75 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 14 ～ 28 | 11 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 28 | 14 ～ 28 | 14 ～ 28 | 11 ～ 28 | 14 ～ 28 | 14 ～ 28 | 14 ～ 28 | 11 ～ 28 | 11 ～ 19 | 11 ～ 28 | 11 ～ 28 | 19 | 28 | 14 ～ 28 | 14 ～ 28 | 0.7 | 0.7 ～ 56 | 27 | 0.5 ～ 1 | 1.25 | 1.5 | 19 ～ 28 | 11 ～ 28 | 11.5 ～ 27 | 14 ～ 28 | 0.7 ～ 1 | 11 ～ 28 | 11.5 ～ 27 | 11 ～ 28 | 40 | 0.5 ～ 3.5 |
| Chamfer threads (Lcf) | 5P | 4P | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P | 3P | 3P | 2P | 2.5P ～ 4P | 4P | - | 3P | 3P | 4P | - | - | - | - | - | - | - | 2.5P | 2.5P |
| Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | - | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | Alloy HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Alloy HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | - | - | - | - | - | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] |
| Tap Type | Point tap | Point tap | Point tap | Point tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Roll tap | Roll tap | Tap for pipes | Thread-Cutting-Related Tool | Thread-Cutting-Related Tool | Thread-Cutting-Related Tool | Tap for pipes | Die | Die | Die | Die | Die | Die | Die | Spiral Tap | Spiral Tap |
| Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | - | - | - | - | For blind hole | For blind hole |
| Coating Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 80 ～ 300 | 40 ～ 95 | 34 ～ 185 | 150 | 34 ～ 82 | 120 ～ 150 | 55 ～ 95 | 120 ～ 150 | 55 ～ 95 | 100 ～ 150 | 55 ～ 80 | 55 ～ 95 | 55 ～ 95 | 100 ～ 150 | 55 ～ 95 | 100 ～ 150 | 100 ～ 150 | 55 ～ 95 | 55 ～ 80 | 100 ～ 150 | 55 ～ 80 | 55 ～ 95 | 62 ～ 95 | 120 ～ 150 | 55 ～ 95 | 65 | 55 | 55 ～ 80 | 100 ～ 150 | 52 | 42 ～ 62 | 55 | 120 ～ 140 | 70 | 150 | 55 ～ 62 | - | - | - | - | - | - | - | 46 | 46 ～ 135 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (2)
- OSG (97)
- ISHIHASHI (10)
- YAMAWA MFG (6)
- H & H (2)
- TRUSCO NAKAYAMA (2)
- NACHI(FUJIKOSHI) (1)
- RUKO (1)
- WALTER PROTOTYP (1)
- SKC (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.