SANDVIK Holding Tools for O.D. Tuning（Applicable Tip Shape：T (Triangle)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 156.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 156.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 401.49 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
T-Max P Negative Shank Bit for O.D.
SANDVIK
Tool for turning outside diameters enabling high productivity, high efficiency and high machining qualityStarting from∗ ： 205.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 141.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 173.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 251.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 184.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 251.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 156.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 141.11 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L
SANDVIK
Excellent cutting chip control and process stability for one of the best part qualityStarting from∗ ： 150.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 361.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 361.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 152.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11
SANDVIK
[Features]
An outer-diameter turning tool featuring stable insert clamping and excellent repeatability.
Produces an unimpeded flow of cutting chips.
Requires little space for operation.
Features a small number of component parts.
For outer-diameter turning (bore cutting) operations.Starting from∗ ： 152.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 152.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 152.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Application |
| Clamp Shape |
| Cutting Direction |
| Applicable Tip Clearance Angle Type |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTFNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR / L | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STGCR/L-09/-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STJCR/L-K11-S | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STTCL1616H11 | |||||||||
| Starting from∗ | 156.84 € *Unit price with basic configuration | 156.84 € *Unit price with basic configuration | 401.49 € *Unit price with basic configuration | 205.40 € *Unit price with basic configuration | 141.11 € *Unit price with basic configuration | 173.81 € *Unit price with basic configuration | 251.30 € *Unit price with basic configuration | 184.70 € *Unit price with basic configuration | 251.30 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 156.84 € *Unit price with basic configuration | 141.11 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 361.52 € *Unit price with basic configuration | 361.52 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 152.00 € *Unit price with basic configuration | 152.00 € *Unit price with basic configuration | 152.00 € *Unit price with basic configuration | 152.00 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Applicable Tip Shape | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) |
| Application | End Face | Outer Diameter | Outer Diameter | Outer Diameter / Profiling | Outer Diameter | End Face | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Profiling / Chamfer | End Face | Outer Diameter | Outer Diameter | End Face | Outer Diameter | Outer Diameter | End Face | Outer Diameter | Outer Diameter | Outer Diameter |
| Clamp Shape | Clamp-on | Cable clamp | Clamp-on | Wedge Lock | Lever lock | - | Clamp-on | Clamp-on | Clamp-on | Double Clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on |
| Cutting Direction | Right-hand / Left-hand | Left-hand | Right-hand | Left-hand | Left-hand | No-hand | Right-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand |
| Applicable Tip Clearance Angle Type | - | Negative | - | Negative | Negative | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv |
| Shank height(mm) | 12 ～ 20 | 20 ～ 25 | 16 | 32 | 16 ～ 25 | 20 ～ 25 | 32 | 25 | 25 | - | 20 ～ 32 | 16 ～ 32 | 20 | - | - | - | 12 | 12 ～ 16 | 12 ～ 16 | 16 |
| Shank width(mm) | 12 ～ 20 | 20 ～ 25 | 16 | 32 | 16 ～ 25 | 9 ～ 13 | 25 | 25 | 25 | - | 20 ～ 32 | 16 ～ 32 | 20 | - | - | - | 12 | 12 ～ 16 | 12 ～ 16 | 16 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Other
-
Cutting Direction
- Right-hand
- Left-hand
- No-hand
-
Applicable Tip Clearance Angle Type
- Negative
- Pozidriv
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Brand
-
- SANDVIK (20)
- KYOCERA (5)
- TUNGALOY (3)
- ISCAR (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for O.D. Tuning
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.