TIGERS POLYMER Conduit
?* Information on days to ship and prices
-
Duct Hose N Type
TIGERS POLYMER
Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
[Features]
· Lightweight and portable.
・It has high flexibility.
· It has superior chemical resistance properties for acids and alkaline etc.
・Metal wires in the core wires reduce heat deformationMin. Shipping Days ： 10 Days -
Silicon Duct Hose SRDH, TS Type/ GS Type
TIGERS POLYMER
This duct hose is airtight and heat resistant (150 - 200 °C). It can be used in temperatures as low as -50°C.Starting from∗ ： 126.35 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Duct Hose GL Type
TIGERS POLYMER
Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
[Features]
· Lightweight and portable.
· Highly flexible.
· Features superior chemical resistance against acids, alkali materials, etc.
· High transport capacity is achieved due to low airflow resistanceMin. Shipping Days ： 9 Days -
Tie Duct Hose Anti-wear GL Type
TIGERS POLYMER
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.Min. Shipping Days ： 10 Days -
Tie Duct Hose, Oil-Resistant, GL Type
TIGERS POLYMER
Uses a special oil-resistant material (soft part of the hose) that is not hardened by lubricating oil, cutting oil, etc. Used for oil mist recovery on manufacturing machinery such as lathes and milling cutters.Min. Shipping Days ： 10 Days -
Tie Duct Hose, GL-E Type
TIGERS POLYMER
GL type tie duct antistatic hose that includes a grounding wire. Transparent, allowing transported materials to be confirmed. Indoor piping duct for clean rooms, etc.Min. Shipping Days ： 10 Days -
Tie Duct Hose, GL-ST Type
TIGERS POLYMER
A transparent antistatic type of tie duct hose. For indoor aerial transportation of soot, piping in clean rooms, etc.Min. Shipping Days ： 10 Days -
Tie Flexible Hose, P Type
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.Starting from∗ ： 76.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flexible Hose, P-2 Type
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.Starting from∗ ： 76.41 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Tie Flex Hose Flame Retardant P Type
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also providedStarting from∗ ： 120.17 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Tie Flexible Hose, A Type
TIGERS POLYMER
Freely extensible/retractable and can be fixed in any position. UL94V-0 equivalent fire resistance. For use with spot coolers.Starting from∗ ： 228.45 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Tiflex Hose, AP Type
TIGERS POLYMER
Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
[Features]
･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
· Flexible, lightweight with superior workability.
· The allowable continuous service temperature is 100˚C or lessStarting from∗ ： 91.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flex Hose V Shaped PAL Type
TIGERS POLYMER
Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
[Features]
Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
· The allowable continuous operating temperature is 130˚C or less.- Volume Discount
Starting from∗ ： 70.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tiflex Hose V Model AG Type
TIGERS POLYMER
Lightweight and with excellent flame and heat resistance. The material used for the product is a flameproof grade 1 material as stipulated in JIS A 1322. The continuous operating temperature is up to 180°C.
[Features]
· Heat resistant flexible hose made of specially laminated aluminum foil, glass cloth, and galvanized steel plate.
· Lightweight and with excellent flame and heat resistance.
· The continuous operating temperature is up to 180˚C.
· The aluminum and the glass cloth sheet are flameproof grade 1 materials as stipulated in JIS A1322.- Volume Discount
Starting from∗ ： 118.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flexible Hose V Model FP Type
TIGERS POLYMER
The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
[Features]
· Made of special coating glass cloth and stainless steel plate (SUS304).
· Easy to stow, store and transport because it can be extended or retracted as and when required.
· The allowable continuous operating temperature is 250°C or less.
· Can be used at higher temperatures than PAL, AG types.
· The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.- Volume Discount
Starting from∗ ： 237.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flexible Hose, V Type, SUS Type
TIGERS POLYMER
Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.- Volume Discount
Starting from∗ ： 116.37 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Min. Shipping Days ： 10 Days -
TiFlex NH-1 Type
TIGERS POLYMER
Excellent expansion/contraction, bending, and thermal insulation. Non-combustible material certified by the Japan Ministry of Land, Infrastructure, Transport and Tourism.Min. Shipping Days ： 10 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Material |
| Cutting Service Usage |
| Properties |
| I.D. d(mm) |
| O.D. D(mm) |
| Color |
| Applicable Fluid |
| Max. Allowable Pressure (below Ambient Temperature)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Product Series | ||||||||||||||||||
| Starting from∗ | - | 126.35 € *Unit price with basic configuration | - | - | - | - | - | 76.41 € *Unit price with basic configuration | 76.41 € *Unit price with basic configuration | 120.17 € *Unit price with basic configuration | 228.45 € *Unit price with basic configuration | 91.76 € *Unit price with basic configuration | 70.53 € *Unit price with basic configuration Volume Discount | 118.25 € *Unit price with basic configuration Volume Discount | 237.29 € *Unit price with basic configuration Volume Discount | 116.37 € *Unit price with basic configuration Volume Discount | - | - |
| Min. Shipping Days ： | 10 Days | 14 Days | 9 Days | 10 Days | 10 Days | 10 Days | 10 Days | 6 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 6 Days | 10 Days | 10 Days | 10 Days |
| Material | PVC | Others | PVC | EPDM | PVC | PVC | PVC | Olefinic Resin | Olefinic Resin | Olefinic Resin | PVC | Aluminum | Aluminum | Aluminum | Special Coating Glass | Stainless Steel | Elastomer | Polypropylene |
| Cutting Service Usage | Yes | No | Yes | Yes | Yes | Yes | Yes | No | No | No | No | No | No | No | No | No | Yes | Yes |
| Properties | Standard / Flexibility | Low Temp. Resistance / Heat Resistance / Flexibility | Standard / Flexibility | Abrasion Resistance / Heat Resistance | Oil Resistance / Flexibility | Antistatic Performance | Antistatic Performance / Flexibility | Standard / Flexibility / Others | Standard / Flexibility / Others | Standard / Flame Resistance / Others | Flame Resistance / Others | Heat Resistance / Flexibility | Heat Resistance / Others | Heat Resistance | Heat Resistance / Others | Heat Resistance | Flexibility | Flame Resistance / Heat Resistance / Flexibility / Others |
| I.D. d(mm) | 16.7 ～ 204.1 | 25 | 25 ～ 303 | 38.1 ～ 208 | 38.1 ～ 202 | 50.8 ～ 152.4 | 25 ～ 152.4 | 37.5 ～ 302 | 37.5 ～ 127.5 | 37.5 ～ 302 | 55 ～ 125 | 38.1 ～ 101.6 | 50.8 ～ 126 | 50.8 ～ 126 | 50.8 ～ 152 | 50.8 ～ 126 | 32 ～ 203.7 | 105 ～ 408 |
| O.D. D(mm) | 21.2 ～ 211.5 | 28 | 32.4 ～ 316.4 | 46 ～ 223 | 45.9 ～ 215 | 59.9 ～ 168.8 | 32.4 ～ 163.8 | 41.5 ～ 308 | 41.5 ～ 131.5 | 41.5 ～ 308 | 62 ～ 132 | 42.9 ～ 110 | 54.3 ～ 130 | 55.3 ～ 131 | 55.3 ～ 157 | 53.8 ～ 129.5 | 39.5 ～ 220 | 155 ～ 458 |
| Color | Gray | Red | Gray | Black | Ivory | Transparent | Transparent | Dark Brown | White | Black | Gray | Gray | Gray | White | Gray | Gray | White | Gray |
| Applicable Fluid | Chemical / Powder / Air | Air | Chemical / Powder / Air | Powder / Grains / Air / Paper Scraps | Machining Oil / Lubricant / Oil Mist | Powder | Powder | Air | Air | Air | Air | Air | Air | Air | Air | Air | Powder / Air | Air |
| Max. Allowable Pressure (below Ambient Temperature)(MPa) | 0.01 ～ 0.06 | - | 0.01 ～ 0.06 | 0.01 ～ 0.05 | 0.01 ～ 0.06 | 0.02 ～ 0.05 | 0.02 ～ 0.06 | 0.002 ～ 0.018 | 0.005 ～ 0.018 | 0.002 ～ 0.018 | - | 0.03 ～ 0.06 | 0.018 ～ 0.032 | 0.018 ～ 0.032 | 0.008 ～ 0.018 | 0.01 ～ 0.018 | 0.01 ～ 0.06 | 0.0005 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Material
- Aluminum
- Special Coating Glass
- Stainless Steel
- Polypropylene
- PVC
- Olefinic Resin
- EPDM
- Elastomer
- Steel
- Others
- Polyurethane
-
Cutting Service Usage
- Yes
- No
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Oil Resistance
- Flame Resistance
- Low Temp. Resistance
- Heat Resistance
- Low Particle Generation
- Flexibility
- Others
-
I.D. d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 38.5±0.5
- 39
- 41
- 42.7
- 50
- 50.5±1.0
- 50.6
- 50.8
- 50.9
- 51
- 52.5
- 53.0
- 53.5
- 55
- 62.4
- 63
- 63.5
- 64
- 64.5±1.0
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 104
- 105
- 109.0
- 113
- 114.3
- 117.0
- 123.0
- 125
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 130
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 180
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 230
- 250
- 252
- 252.1
- 253
- 253.0±2.0
- 253.5
- 254
- 257
- 278
- 282
- 300
- 302
- 303
- 303.5
- 307
- 357
- 359.0
- 400
- 408
- 410.0
- 500
- 512.0
-
O.D. D(mm)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 44.5±1.0
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.8±1.5
- 59.9
- 60.2
- 61.0
- 61.2
- 61.8
- 62
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 73.0
- 73.2
- 73.2±1.5
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87
- 87.2
- 87.6
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 140.2
- 155
- 155.5
- 155.7
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 208
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 220
- 223
- 230
- 240.4
- 243.1
- 255
- 255.9
- 256
- 259.5
- 261.0
- 263.9
- 263.9±2.5
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 280
- 292.6
- 305.9
- 306.5
- 307
- 308
- 309.6
- 311
- 316.0
- 316.4
- 318
- 320.0
- 322
- 328.2
- 332
- 357
- 378.5
- 407
- 418.0
- 431.0
- 458
- 520.0
- 532.0
-
Color
- Black
- White
- Gray
- Transparent
- Ivory
- Dark Brown
- Red
- Metal Color
-
Applicable Fluid
-
Max. Allowable Pressure (below Ambient Temperature)(MPa)
Narrow search by specifying Brand
-
- MISUMI (7)
- TIGERS POLYMER (18)
- TOTAKU INDUSTRIES (17)
- KANAFLEX CORPORATION (12)
- KURIMOTO (5)
- KURARAYPLASTICS (4)
- OHTSUKA (2)
- ORIENT CORPORATION (2)
- COSMOTEC (1)
- SHINSUNG (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Conduit
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.