Set Collars / Clamping Rings（Page 6）
Filter products by: Tightening Method
?* Information on days to ship and prices
-
Set collars / stainless steel / two-piece / EA966CE-21
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…5 x 20 x 10Configure nowStarting from∗ ： 23.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-23
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…8 x 25 x 10Configure nowStarting from∗ ： 26.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-26
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…13 x 30 x 10Configure nowStarting from∗ ： 28.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-27
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…15 x 35 x 12Configure nowStarting from∗ ： 30.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-28
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…16 x 35 x 12Configure nowStarting from∗ ： 31.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-34
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…40 x 70 x 18Configure nowStarting from∗ ： 82.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-35
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…45 x 75 x 18Configure nowStarting from∗ ： 90.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / EA966CE-36
ESCO
【Product Specifications】
・Separate type
・Material-Stainless steel (SUS304)
・ID x OD x Width…50 x 85 x 22Configure nowStarting from∗ ： 110.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Set collars / steel / double grub screw / DIN 703 / 00703000
REYHER
[Specifications]
・Tightening Method: Set Screw
・Surface Treatment: No Surface Treatment
・Material: Steel
[Features]
・Adjusting rings, heavy range, with set screw
・DIN 703- Volume Discount
Configure nowStarting from∗ ： 7.34 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Set collars / aluminium, steel / slotted / clamping lever / GN 706.4
GANTER
Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 32 and 36, d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 18.70 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Set collars / stainless steel / slotted / clamping lever / GN 706.4
GANTER
Semi-split set collars GN 706.4 can safely and simply be assembled i.e. with high clamping force without damaging the surface of the shaft.
For size d1 = 32 and 36, d3 is a through hole; starting from d1 = 42 d3 is a threaded blind bore.
These set collars not only serve as an end stop, but they can also be used for fixing or triggering other components such as end limit switches.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 26.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Set collars / steel / slotted / internal thread / GN 706.3
GANTER
Threaded set collars GN 706.3 can be used in connection with bolt thread tolerance 6g. After clamping, the thread of the semi-split set collar may no longer be tolerance-stable (6H).
The thread d3 for sizes d1 = 20 to 36 is designed as a through hole, from size d1 = 42 it is designed as blind hole.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Set collars / stainless steel / slotted / damped / GN 7062.3
GANTER
The affixed dampening washer of the semi-split Stainless Steel-Set collars GN 7062.3 absorbs mild shocks and has a sound-dampening effect when the set collars come into contact with other components.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Configure nowStarting from∗ ： 13.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / stainless steel / shape selectable / GN 7062.3
GANTER
With extension-tapped holes of the semi-split Stainless Steel-Set collars GN 7062.1, sensor holders GN 7062.10 or other elements such as the gear lever or cam can be attached to shafts and axles.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Configure nowStarting from∗ ： 29.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / stainless steel / slotted / cross bore selectable / GN 7062.2
GANTER
With semi-split Stainless Steel-Set collars GN 7062.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Configure nowStarting from∗ ： 27.50 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / shape selectable / GN 7072.1
GANTER
With extension-tapped holes of the split Stainless Steel-Set collars GN 7072.1, sensor holders GN 7062.10 or other elements such as the gear lever or cam can be attached to shafts and axles.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Configure nowStarting from∗ ： 36.14 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Set collars / stainless steel / two-piece / cross bore selectable / GN 7072.2
GANTER
With split Stainless Steel-Set collars GN 7072.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts.
They can be assembled safely and easily with a high clamping force by reducing the slot height, without damaging the surface of shafts and axles. As compared to semi-split set collars, split set collars can even be assembled radially.
The thread d3 for sizes d1 = 30 to 36 is designed as a through hole; for sizes d1 = 42 and larger, it is designed as blind hole.- Volume Discount
Configure nowStarting from∗ ： 33.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Clamp hubs (K0376)
KIPP
· Shafts can be turned and positioned in combination with a handle
· Quick and easy assembly- 2D / 3D CAD data available
Configure nowStarting from∗ ： 15.99 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars tapped (K0986)
KIPP
· Prevents damage to the thread
· Temperature range: -40 °C to +175 °C
· Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 4.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Collar, Single Slit, KR
KBK
· Slit collar for fixing components axially
· Suitable for beeing used on slit hollow shafts
· For shaft diameters from 4 mm - 50 mm
· Easy, secure and fast assembly with radial clamping screws
· Keyways possible on request
· Executions in blackened steel available
· Axial force 867N – 8135NConfigure nowStarting from∗ ： 2.16 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Collar, Single Slit, KR-VA
KBK
· Slit collar for fixing components axially
· Suitable for beeing used on slit hollow shafts
· For shaft diameters from 4 mm - 50 mm
· Easy, secure and fast assembly with radial clamping screws
· Keyways possible on request
· Executions in stainless steel available
· Axial force 867N – 8135NConfigure nowStarting from∗ ： 4.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Collar, Split, KR-G
KBK
· Split collar for fixing components axially
· Easy, secure and fast assembly with radial clamping screws
· For shaft diameters from 4 mm - 50 mm
· Keyways possible on request
· Executions in blackened steel available
· Axial force 1300 - 14560 NConfigure nowStarting from∗ ： 3.02 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Collar, Split, KR-G-VA
KBK
· Split collar for fixing components axially
· Easy, secure and fast assembly with radial clamping screws
· For shaft diameters from 4 mm - 50 mm
· Keyways possible on request
· Executions in stainless steel available
· Axial force 1300 - 14560 NConfigure nowStarting from∗ ： 4.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Shaft collars with thread (07814)
NORELEM
· Prevents damage to the thread
· Temperature range: -40 °C to +175 °C
· Version: steel or stainless steelConfigure nowStarting from∗ ： 5.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars one-piece, with clamping lever (07810)
NORELEM
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaft
· Clamping lever enables clamping without the need for toolsConfigure nowStarting from∗ ： 12.94 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
One-piece shaft collars, slitted outside (07810)
NORELEM
· Slit outside
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaftConfigure nowStarting from∗ ： 3.23 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars set screw DIN 705, stainless steel, Form E, hexagon socket (07800)
NORELEM
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaftConfigure nowStarting from∗ ： 1.61 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars set screw DIN 705, steel, Form E, hexagon socket (07800)
NORELEM
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaftConfigure nowStarting from∗ ： 0.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars set screw DIN 705, steel, Form A, recess (07800)
NORELEM
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaftConfigure nowStarting from∗ ： 0.57 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars one-piece, wide, slitted outside (K1923)
KIPP
· Slit outside
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaft- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars one-piece, wide, slitted inside (K1924)
KIPP
· Slit inside
· Positioning and stop element for shafts
· Dimensionally precise
· Very high retaining forces
· Prevents damage to the shaft- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft collars two-piece wide (K1925)
KIPP
· Positioning and stop element for shafts
· Precise fit
· Very high retaining forces
· Prevents damage to the shaft
· Temperature range: -40 °C to +175 °C- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 3.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Rubber Pads for Shaft Collars B1
MAEDLER
Material: Rubber NBR, black, 70º +/-5º Shore A.
These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft.
For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used.- Volume Discount
Configure nowStarting from∗ ： 0.68 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Double-Split, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 17.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Aluminium
MAEDLER
Material: Aluminium, screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 6.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Aluminium Anodized
MAEDLER
Material: Aluminium anodized, screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 10.80 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), Screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 10.13 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Aluminium Anodized
MAEDLER
Material: Aluminium anodized, screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 8.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screw steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 3.48 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars with Thread, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Max. speed: 4,000 min-1.
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 6.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* Size 20 is not part of the old standard DIN 703.- Volume Discount
Configure nowStarting from∗ ： 7.87 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Black Oxide Finish
MAEDLER
Material: Steel, black oxide finish.
Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* Size 20 is not part of the old standard DIN 703.- Volume Discount
Configure nowStarting from∗ ： 5.24 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type S, Aluminium
MAEDLER
Material: Aluminium, screw stainless steel A2-70.
Type S: Slim version, e.g. for encoders.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 9.27 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type S, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screw stainless A2-70.
Type S: Slim version, e.g. for encoders.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Configure nowStarting from∗ ： 6.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Tightening Method |
| RoHS Information |
| Specifications |
| Features, Areas of Application |
| I.D.(mm) |
| O.D.(mm) |
| Width(mm) |
| Material |
| Surface Treatment |
| Thickness |
| Side Surface Machining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | REYHER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | KIPP | KIPP | KBK | KBK | KBK | KBK | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | NORELEM | KIPP | KIPP | KIPP | KIPP | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Set collars / steel / double grub screw / DIN 703 / 00703000 | Set collars / aluminium, steel / slotted / clamping lever / GN 706.4 | Set collars / stainless steel / slotted / clamping lever / GN 706.4 | Set collars / stainless steel / slotted / damped / GN 7062.3 | Set collars / stainless steel / shape selectable / GN 7062.3 | Set collars / stainless steel / slotted / cross bore selectable / GN 7062.2 | Set collars / stainless steel / two-piece / shape selectable / GN 7072.1 | Set collars / stainless steel / two-piece / cross bore selectable / GN 7072.2 | Shaft collars set screw DIN 705, stainless steel, Form E, hexagon socket (07800) | Shaft collars set screw DIN 705, steel, Form E, hexagon socket (07800) | Shaft collars set screw DIN 705, steel, Form A, recess (07800) | Shaft Collars, Clamp Collars Double Wide, Double-Split, Stainless Steel | Shaft Collars, Clamp Collars Double-Split, Aluminium Anodized | Shaft Collars, Clamp Collars Single-Split, Aluminium Anodized | Shaft Collars, Clamp Collars Single-Split, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type S, Aluminium | Shaft Collars, Clamp Collars, Single-Split - Type S, Stainless Steel | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 23.89 € *Unit price with basic configuration | 26.67 € *Unit price with basic configuration | 28.93 € *Unit price with basic configuration | 30.42 € *Unit price with basic configuration | 31.26 € *Unit price with basic configuration | 82.17 € *Unit price with basic configuration | 90.97 € *Unit price with basic configuration | 110.74 € *Unit price with basic configuration | 7.34 € *Unit price with basic configuration Volume Discount | 18.70 € *Unit price with basic configuration Volume Discount | 26.16 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 13.06 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 13.90 € *Unit price with basic configuration Volume Discount | 29.82 € *Unit price with basic configuration Volume Discount | 27.50 € *Unit price with basic configuration Volume Discount | 36.14 € *Unit price with basic configuration Volume Discount | 33.36 € *Unit price with basic configuration Volume Discount | 15.99 € *Unit price with basic configuration | 4.66 € *Unit price with basic configuration | 2.16 € *Unit price with basic configuration | 4.00 € *Unit price with basic configuration | 3.02 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 5.93 € *Unit price with basic configuration | 12.94 € *Unit price with basic configuration | 3.23 € *Unit price with basic configuration | 1.61 € *Unit price with basic configuration | 0.73 € *Unit price with basic configuration | 0.57 € *Unit price with basic configuration | 7.46 € *Unit price with basic configuration | 7.46 € *Unit price with basic configuration | 9.02 € *Unit price with basic configuration | 3.78 € *Unit price with basic configuration | 0.68 € *Unit price with basic configuration Volume Discount | 17.62 € *Unit price with basic configuration Volume Discount | 6.33 € *Unit price with basic configuration Volume Discount | 10.80 € *Unit price with basic configuration Volume Discount | 10.13 € *Unit price with basic configuration Volume Discount | 8.46 € *Unit price with basic configuration Volume Discount | 3.48 € *Unit price with basic configuration Volume Discount | 6.26 € *Unit price with basic configuration Volume Discount | 7.87 € *Unit price with basic configuration Volume Discount | 5.24 € *Unit price with basic configuration Volume Discount | 9.27 € *Unit price with basic configuration Volume Discount | 6.12 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 3 Days | 7 Days | Same day | Same day | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 4 Days | 4 Days | 7 Days | 7 Days | 7 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Tightening Method | - | - | - | - | - | - | - | - | Set Screw | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Slit | Slit | Slit | Set Screw | Set Screw | Set Screw | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | - | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Features, Areas of Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D.(mm) | - | - | - | - | - | - | - | - | 20 ～ 100 | - | - | - | - | - | - | - | - | 10 ～ 16 | 4 ～ 20 | - | - | - | - | 4 ～ 20 | 10 ～ 50 | 4 ～ 50 | 3 ～ 100 | 3 ～ 100 | 3 ～ 100 | - | - | - | - | - | 6+0.05 ～ 50+0.12 | 3 ～ 50 | 3 ～ 50 | 3 ～ 100 | 3 ～ 50 | 3 ～ 100 | - | 20* ～ 90 | 20* ～ 90 | - | - |
| O.D.(mm) | - | - | - | - | - | - | - | - | 40 ～ 140 | - | - | - | - | - | - | - | - | 24 ～ 32 | 16 ～ 40 | - | - | - | - | 16 ～ 40 | 24 ～ 78 | 16 ～ 78 | 7 ～ 140 | 7 ～ 140 | 7 ～ 140 | - | - | - | - | - | 16 ～ 78 | 16 ～ 78 | 16 ～ 78 | 16 ～ 140 | 16 ～ 78 | 16 ～ 140 | 16 ～ 54 | 40 ～ 125 | 40 ～ 125 | 25 ～ 60 | 25 ～ 60 |
| Width(mm) | - | - | - | - | - | - | - | - | 20 ～ 32 | - | - | - | - | - | - | - | - | 15.5 ～ 19.5 | 9 ～ 15 | - | - | - | - | 9 ～ 15 | 9 ～ 19 | 9 ～ 19 | 5 ～ 25 | 5 ～ 25 | 5 ～ 25 | - | - | - | - | - | 20 ～ 41 | 9 ～ 19 | 9 ～ 19 | 9 ～ 32 | 9 ～ 19 | 9 ～ 32 | 9 ～ 15 | 20 ～ 32 | 20 ～ 32 | 6 ～ 12 | 6 ～ 12 |
| Material | - | - | - | - | - | - | - | - | Steel | - | - | - | - | - | - | - | - | - | Steel / Stainless Steel | Steel | Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Aluminum | Stainless Steel | Steel | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | No Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | No Surface Treatment | No Surface Treatment | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | Surface Treatment Provided | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | No Surface Treatment |
| Thickness | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Side Surface Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
RoHS Information
-
Specifications
-
Features, Areas of Application
-
I.D.(mm)
- 3
- 4
- 5
- 6
- 6+0.05
- 6.35
- 7
- 7.938
- 8
- 8+0.07
- 9
- 9.525
- 10
- 10+0.07
- 10.5
- 11
- 11.113
- 12
- 12+0.07
- 12.7
- 13
- 13.8
- 14
- 15
- 15.875
- 16
- 16+0.07
- 17
- 17.3
- 18
- 19
- 19.05
- 20
- 20*
- 20+0.07
- 21
- 21.7
- 22
- 22.225
- 23
- 23.813
- 24
- 25
- 25+0.07
- 25.4
- 26
- 27
- 27.2
- 28
- 28.575
- 30
- 30+0.12
- 31.75
- 32
- 34
- 34.925
- 35
- 36
- 38
- 38.1
- 40
- 40+0.12
- 42
- 42.7
- 44.45
- 45
- 48
- 48.6
- 50
- 50+0.12
- 50.8
- 52
- 55
- 56
- 57.15
- 58
- 60
- 63
- 63.5
- 65
- 68
- 70
- 72
- 75
- 76.2
- 80
- 85
- 90
- 100
- 110
- 120
- 125
- 130
- 140
-
O.D.(mm)
- 7
- 8
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 17.2
- 18
- 18*
- 18.7
- 19
- 20
- 21.7
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 29
- 29.2
- 30
- 31
- 32
- 33
- 33.2
- 34
- 34.5
- 35
- 35.5
- 36
- 38
- 39
- 40
- 40.2
- 41
- 42
- 43
- 44
- 45
- 46
- 46.2
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 52.2
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 65.4
- 66
- 66.5
- 68
- 69
- 70
- 72
- 73
- 75
- 76
- 78
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 86
- 88
- 90
- 93
- 94
- 95
- 98
- 100
- 103
- 105
- 108
- 110
- 113
- 115
- 119
- 125
- 126
- 130
- 140
- 150
- 160
- 170
- 180
- 200
[7-120/1mm Unit(s)]
-
Width(mm)
-
Material
-
Surface Treatment
-
Thickness
-
Side Surface Machining
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Examples how you can use these components
Categories related to Set Collars / Clamping Rings
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.