Set Collars / Clamping Rings（Page 7）

Filter products by: Tightening Method

312

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Shaft Collars, Clamp Collars, Single-Split - Type S, Aluminium

MAEDLER

Material: Aluminium, screw stainless steel A2-70.
Type S: Slim version, e.g. for encoders.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	4.54 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type N, Steel, Black Oxide Fnish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
Type N: With keyway DIN 6885-1.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type N, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type N: With keyway DIN 6885-1.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.12 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish.
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).

Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools.

Type GRK: With mounting flat and two radial mounting bores, with thread.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.66 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303).
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).

Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools.

Type GRK: With mounting flat and two radial mounting bores, with thread.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.87 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type GR, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GR: With mounting flat and two radial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type GA, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
Type GA: With two axial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.78 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

* Fitting screw size for B1.
** Fitting screw size for B2.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

* Fitting screw size for B1.
** Fitting screw size for B2.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type S, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screw stainless A2-70.

Type S: Slim version, e.g. for encoders.
The threads of the screws DIN 912 are covered with a layer of polyamide.

Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.27 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type N, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
Type N: With keyway DIN 6885-1.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type N, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type N: With keyway DIN 6885-1.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.65 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type GR, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GR: With mounting flat and two radial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type GA, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
Type GA: With two axial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.71 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type GA, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GA: With two axial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.72 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

* Fitting screw size for B1.
** Fitting screw size for B2.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.86 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars with Thread, Double-Split, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Max. speed: 4,000 min^-1.
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.27 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, or zinc-plated.
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).

Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.
The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Stainless Steel

MAEDLER

Material: Stainless steel 1.4305 (AISI 303).
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.
The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.90 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Aluminium

MAEDLER

Material: Aluminium.
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.
The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.68 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Single-Split, Inch Size Bore, Aluminium

MAEDLER

Material: Aluminium, screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precise bores in inch size.
The threads of the metric screws DIN 912 are covered with a layer of polyamide.

Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	4.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Double-Split, Steel, Zinc-plated

MAEDLER

Material: Steel C45, zinc-plated, Screws steel 12.9.

Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.

Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	6.40 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Double-Split, Polyamide

MAEDLER

Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat.
Screws and nuts stainless steel 1.4404 (AISI 316 L).
Features: Strong version with metal nuts.
Easy to mount and quickly to adjust.
Does not damage the shaft.
Even distribution of clamping force.
Low mass inertia.
Suitable for use in corrosive atmospheres.
Temperature range: up to +80ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Double-Split, Inch Size Bore, Steel, Black Oxide Finish

MAEDLER

Material: Steel C45, black oxide finish, screws steel 12.9.

Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precise bores in inch size.
The threads of the metric screws DIN 912 are covered with a layer of polyamide.

Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft Collars, Clamp Collars Double-Split, Inch Size Bore, Aluminium

MAEDLER

Material: Aluminium, screws stainless steel A2-70.

Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precise bores in inch size.
The threads of the metric screws DIN 912 are covered with a layer of polyamide.

Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	6.83 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel, Black Oxide Finish

MAEDLER

Material: Steel, black oxide finish.
Light-duty series. With set screw made from steel. Slotted set screw as in DIN EN 27434 (formerly DIN 553).
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* At size 9, the outer dimensions are not like DIN 705.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel, Zinc-plated

MAEDLER

Material: Steel zinc-plated.
Light-duty series. With set screw made from steel zinc-plated.
Slotted set screw as in DIN EN 27434 (formerly DIN 553).
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* At size 9, the outer dimensions are not like DIN 705.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel Bright

MAEDLER

Material: Steel, bright.
Light-duty series. With set screw made from steel. Slotted set screw as in DIN EN 27434 (formerly DIN 553).
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* At size 9, the outer dimensions are not like DIN 705.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Zinc-plated

MAEDLER

Material: Steel, zinc-plated.
Light-duty series. With set screw made from steel zinc-plated. Set screw with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).
Up to size d₁ = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw. From size d₁ = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* At size 9, the outer dimensions are not like DIN 705.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Bright

MAEDLER

Material: Steel, bright.
Light-duty series. With set screw made from steel. Set screw with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).
Up to size d₁ = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw. From size d₁ = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* At size 9, the outer dimensions are not like DIN 705.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Black Oxide Finish

MAEDLER

Material: Steel, black oxide finish.
Light-duty series. With set screw made from steel. Set screw with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).
Up to size d₁ = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw. From size d₁ = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* At size 9, the outer dimensions are not like DIN 705.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Zinc-plated

MAEDLER

Material: Steel, zinc-plated.
Heavy-duty series. With allen set screw made from steel zinc-plated like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d₁=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* Size 20 is not part of the old standard DIN 703.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Bright

MAEDLER

Material: Steel, bright.
Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d₁=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.

* Size 20 is not part of the old standard DIN 703.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	4.97 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Rubber Pads for Levelling Pads 2259

MAEDLER

Material: Rubber NBR, black, 85º +/-5º Shore A.
Oil-resistant rubber pads for levelling pads 2259.
The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.31 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping ring for flexible clamping bolt, Form B (04395-12)

NORELEM

· Brass clamping ring prevents marks on the workpiece

· Flattened design enables easy workpiece removal.

Select to compare

Configure now
Starting from^∗ ：	30.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Column shaft collars (29215)

NORELEM

· Exact setting of the base or column clamp

· Assembly of the elements with precise positioning

· Suitable for use as a stop

Select to compare

Configure now
Starting from^∗ ：	73.75 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft collars wide, for flat-milled shafts (07815)

NORELEM

· Positioning and stop element for shafts

· Dimensionally precise

· Very high retaining forces

· Prevents damage to the shaft

Select to compare

Configure now
Starting from^∗ ：	34.17 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft collars two-piece wide (07813)

NORELEM

· Positioning and stop element for shafts

· Precise fit

· Very high retaining forces

· Prevents damage to the shaft

· Temperature range: -40 °C to +175 °C

Select to compare

Configure now
Starting from^∗ ：	10.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft collars one-piece, wide, slitted outside (07811)

NORELEM

· Slit outside

· Positioning and stop element for shafts

· Dimensionally precise

· Very high retaining forces

· Prevents damage to the shaft

Select to compare

Configure now
Starting from^∗ ：	8.96 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft collars one-piece, wide, slitted inside (07811)

NORELEM

· Slit inside

· Positioning and stop element for shafts

· Dimensionally precise

· Very high retaining forces

· Prevents damage to the shaft

Select to compare

Configure now
Starting from^∗ ：	8.96 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Shaft collar, plastic (07810-05)

NORELEM

· Corrosion-resistant

Select to compare

Configure now
Starting from^∗ ：	4.68 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Clamping ring for flexible clamping bolt, Form A (04395-12)

NORELEM

· Brass clamping ring prevents marks on the workpiece

· Flattened design enables easy workpiece removal.

Select to compare

Configure now
Starting from^∗ ：	21.33 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Tightening Method
RoHS Information
Specifications
Features, Areas of Application
I.D.(mm)
O.D.(mm)
Width(mm)
Material
Surface Treatment
Thickness
Side Surface Machining

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM	NORELEM
Product Series	Shaft Collars, Clamp Collars, Single-Split - Type S, Aluminium	Shaft Collars, Clamp Collars, Single-Split - Type N, Steel, Black Oxide Fnish	Shaft Collars, Clamp Collars, Single-Split - Type N, Stainless Steel	Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Stainless Steel	Shaft Collars, Clamp Collars, Single-Split - Type GR, Stainless Steel	Shaft Collars, Clamp Collars, Single-Split - Type GA, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Stainless Steel	Shaft Collars, Clamp Collars, Double-Split - Type S, Stainless Steel	Shaft Collars, Clamp Collars, Double-Split - Type N, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars, Double-Split - Type N, Stainless Steel	Shaft Collars, Clamp Collars, Double-Split - Type GR, Stainless Steel	Shaft Collars, Clamp Collars, Double-Split - Type GA, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars, Double-Split - Type GA, Stainless Steel	Shaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars with Thread, Double-Split, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Stainless Steel	Shaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Aluminium	Shaft Collars, Clamp Collars Single-Split, Inch Size Bore, Aluminium	Shaft Collars, Clamp Collars Double-Split, Steel, Zinc-plated	Shaft Collars, Clamp Collars Double-Split, Polyamide	Shaft Collars, Clamp Collars Double-Split, Inch Size Bore, Steel, Black Oxide Finish	Shaft Collars, Clamp Collars Double-Split, Inch Size Bore, Aluminium	Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel, Black Oxide Finish	Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel, Zinc-plated	Adjusting Rings DIN 705 A, with Slotted Set Screw, Steel Bright	Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Zinc-plated	Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Bright	Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Black Oxide Finish	Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Zinc-plated	Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Bright	Rubber Pads for Levelling Pads 2259	Clamping ring for flexible clamping bolt, Form B (04395-12)	Column shaft collars (29215)	Shaft collars wide, for flat-milled shafts (07815)	Shaft collars two-piece wide (07813)	Shaft collars one-piece, wide, slitted outside (07811)	Shaft collars one-piece, wide, slitted inside (07811)	Shaft collar, plastic (07810-05)	Clamping ring for flexible clamping bolt, Form A (04395-12)
CAD
Starting from^∗	4.54 € *Unit price with basic configuration Volume Discount	7.20 € *Unit price with basic configuration Volume Discount	12.12 € *Unit price with basic configuration Volume Discount	18.66 € *Unit price with basic configuration Volume Discount	23.87 € *Unit price with basic configuration Volume Discount	13.76 € *Unit price with basic configuration Volume Discount	8.78 € *Unit price with basic configuration Volume Discount	7.95 € *Unit price with basic configuration Volume Discount	14.36 € *Unit price with basic configuration Volume Discount	9.27 € *Unit price with basic configuration Volume Discount	8.26 € *Unit price with basic configuration Volume Discount	12.65 € *Unit price with basic configuration Volume Discount	15.51 € *Unit price with basic configuration Volume Discount	10.71 € *Unit price with basic configuration Volume Discount	14.72 € *Unit price with basic configuration Volume Discount	9.86 € *Unit price with basic configuration Volume Discount	9.27 € *Unit price with basic configuration Volume Discount	11.02 € *Unit price with basic configuration Volume Discount	14.90 € *Unit price with basic configuration Volume Discount	11.68 € *Unit price with basic configuration Volume Discount	4.05 € *Unit price with basic configuration Volume Discount	6.40 € *Unit price with basic configuration Volume Discount	8.76 € *Unit price with basic configuration Volume Discount	5.95 € *Unit price with basic configuration Volume Discount	6.83 € *Unit price with basic configuration Volume Discount	0.95 € *Unit price with basic configuration Volume Discount	0.95 € *Unit price with basic configuration Volume Discount	0.76 € *Unit price with basic configuration Volume Discount	0.95 € *Unit price with basic configuration Volume Discount	0.76 € *Unit price with basic configuration Volume Discount	0.95 € *Unit price with basic configuration Volume Discount	5.24 € *Unit price with basic configuration Volume Discount	4.97 € *Unit price with basic configuration Volume Discount	2.31 € *Unit price with basic configuration Volume Discount	30.61 € *Unit price with basic configuration	73.75 € *Unit price with basic configuration	34.17 € *Unit price with basic configuration	10.82 € *Unit price with basic configuration	8.96 € *Unit price with basic configuration	8.96 € *Unit price with basic configuration	4.68 € *Unit price with basic configuration	21.33 € *Unit price with basic configuration
Min. Shipping Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Tightening Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Set Screw	Set Screw	Set Screw	Split	Slit	Slit	Slit	Set Screw
RoHS Information	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Specifications	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Features, Areas of Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
I.D.(mm)	-	8 ～ 60	8 ～ 60	10 ～ 50	10 ～ 50	-	-	-	-	-	8 ～ 60	8 ～ 60	-	-	-	-	-	5 ～ 60	5 ～ 55	5 ～ 50	6.35 ～ 44.45	3 ～ 100	12 ～ 40	6.35 ～ 76.2	6.35 ～ 44.45	3 ～ 70	3 ～ 70	3 ～ 70	3 ～ 100	3 ～ 100	3 ～ 100	20* ～ 90	20* ～ 90	-	-	-	5 ～ 25	8 ～ 50	8 ～ 50	8 ～ 50	20 ～ 50	-
O.D.(mm)	25 ～ 60	18 ～ 88	18 ～ 88	28 ～ 82	28 ～ 82	28 ～ 82	28 ～ 82	28 ～ 82	28 ～ 82	25 ～ 60	18 ～ 88	18 ～ 88	28 ～ 82	28 ～ 82	28 ～ 82	28 ～ 82	16 ～ 54	16 ～ 88	16 ～ 82	16 ～ 78	18 ～ 73	16 ～ 140	35 ～ 65	18 ～ 108	18 ～ 73	7 ～ 100	7 ～ 100	7 ～ 100	7 ～ 140	7 ～ 140	7 ～ 140	40 ～ 125	40 ～ 125	-	-	-	17 ～ 50	18 ～ 78	18 ～ 78	18 ～ 78	40 ～ 78	-
Width(mm)	6 ～ 12	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	6 ～ 12	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 15	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 19	9 ～ 32	13 ～ 14	9 ～ 19	9 ～ 19	5 ～ 20	5 ～ 20	5 ～ 20	5 ～ 25	5 ～ 25	5 ～ 25	20 ～ 32	20 ～ 32	-	-	-	-	-	-	-	-	-
Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Aluminum	Aluminum	Steel / Stainless Steel	Steel / Stainless Steel	Steel / Stainless Steel	-	-
Surface Treatment	No Surface Treatment	Surface Treatment Provided	No Surface Treatment	Surface Treatment Provided	No Surface Treatment	No Surface Treatment	Surface Treatment Provided	Surface Treatment Provided	No Surface Treatment	No Surface Treatment	Surface Treatment Provided	No Surface Treatment	No Surface Treatment	Surface Treatment Provided	No Surface Treatment	Surface Treatment Provided	Surface Treatment Provided	Surface Treatment Provided	No Surface Treatment	No Surface Treatment	No Surface Treatment	Zinc Plating	Surface Treatment Provided	Surface Treatment Provided	No Surface Treatment	Surface Treatment Provided	Zinc Plating	No Surface Treatment	Zinc Plating	No Surface Treatment	Surface Treatment Provided	Zinc Plating	No Surface Treatment	No Surface Treatment	-	-	-	-	-	-	-	-
Thickness	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Side Surface Machining	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

RoHS Information
- RoHS Requirements Fulfilled
Clear

Specifications
Enlarge image

Clear

Features, Areas of Application
Corrosion and Chemical Resistance

Not Applicable
Details

Clear

I.D.(mm)
3

4

5

6

6+0.05

6.35

7

7.938

8

8+0.07

9

9.525

10

10+0.07

10.5

11

11.113

12

12+0.07

12.7

13

13.8

14

15

15.875

16

16+0.07

17

17.3

18

19

19.05

20

20*

20+0.07

21

21.7

22

22.225

23

23.813

24

25

25+0.07

25.4

26

27

27.2

28

28.575

30

30+0.12

31.75

32

34

34.925

35

36

38

38.1

40

40+0.12

42

42.7

44.45

45

48

48.6

50

50+0.12

50.8

52

55

56

57.15

58

60

63

63.5

65

68

70

72

75

76.2

80

85

90

100

110

120

125

130

140
Drawing

Clear

O.D.(mm)
7

8

10

11

12

13

14

15

16

17

17.2

18

18*

18.7

19

20

21.7

22

23

24

24.2

25

26

27

28

29

29.2

30

31

32

33

33.2

34

34.5

35

35.5

36

38

39

40

40.2

41

42

43

44

45

46

46.2

47

48

49

50

51

51.5

52

52.2

53

54

55

56

57

58

59

60

62

63

64

65

65.4

66

66.5

68

69

70

72

73

75

76

78

79

79.5

80

81

82

83

85

86

88

90

93

94

95

98

100

103

105

108

110

113

115

119

125

126

130

140

150

160

170

180

200
[7-120/1mm Unit(s)]
Drawing

Clear

Width(mm)
1.5

5

6

7

7.5

8

8.5

9

9.5

10

10*

11

11.5

12

12.5

13

14

15

15.5

16

17

17.5

18

19

19.5

20

21

22

22.5

23

24

25

26

27

28

28.5

29

30

32

33

36

41

47

67
[5-35/1mm Unit(s)]
Drawing

Clear

Material
- Steel
- Stainless Steel
- Aluminum
- Resin
Clear

Surface Treatment
Clear

Thickness
Clear

Side Surface Machining
- Not Provided
- 2-Hole
- 3-Hole
- 4-Hole
- Screw 2-Hole
- Screw 3-Hole
- Screw 4-Hole
- Counterbore 2-Hole
- Counterbore 3-Hole
Clear

Brand

- MISUMI (39)
- Cost Efficient Products ()
Clear

CAD data type

- 2D
- 3D
Clear

Standard shipping days

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less
Clear