Linear Bushings / Linear Ball Bearings / Linear Ball Bushings（Page 2）

?* Information on days to ship and prices

• 

  Spring groove plates for linear ball bearings

  MISUMI

  [Features] Stopper to be used for fitting linear bushings into an enclosure.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ball cage guidance systems / seal / ST-UU, ST-UUB

  THK

  Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
  
  [Features]
  · [Extremely low friction coefficient] Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
  · [Compact-design] Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.
  · [High accuracy and low price] The sliding parts can be manufactured at low cost and a high level of accuracy is obtained.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ball cage guidance systems / stainless steel, steel / double annular groove

  MISUMI

  [Features] Enables rotary movements, finite linear movements and combined movements.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / stainless steel / double ring groove / LM-MG

  THK

  This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. Part of the milli series, the most widely used series in Japan.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.87 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / double flat round flange / steel / LMH-L

  THK

  Flange is oval-shaped. More suitable than the LMK-L type for compact designs due to lower core height.
  With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
  To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	77.55 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / round flange, flattened on both sides / S

  THK

  The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type.
  To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.05 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / KH..-PP / greased at first / sealed at both ends / relubrication possible

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Linear ball bearings / wide block type / aluminium / SMYC

  MYT

  Linear bushing with integrated housing unit. A standard type. Suitable for use in standard applications. MYT is a manufacturer of linear parts based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / double flat round flange / steel / LMYMH

  MYT

  Two face flange type for convenient mounting. A single type product. Suitable for use in standard applications. MYT is a manufacturer of linear parts based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.17 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Slide Bushing SMA Type (Standard Block Type)

  NIPPON BEARING

  [Features]
  · Standard block type
  · Most common slide unit with aluminum housing.
  · A slide bushing is embedded in the housing, and a block shape corresponding to the fitting can be selected.
  [Applications]
  · Due to the low-friction linear action and simple structure, this product is suitable for diverse applications, including transport equipment and semiconductor manufacturing equipment.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Slide Bushing SMK Type (Square Flange Type)

  NIPPON BEARING

  [Features]
  · Square flange type
  · Appropriate for compact mechanism designs due to effective use of space resulting from use with round shafts.
  · Can be randomly combined with shafts due to full compatibility with NB slide bushings.
  [Applications]
  · Due to the low-friction linear action and simple structure, this product is suitable for diverse applications, including transport equipment and semiconductor manufacturing equipment.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear ball bearings / KN..-B-PP / closed design / sealed on all sides / relubrication facility / angle adjustable

  INA

  [Specifications]
  ・Diameter of Inscribed Circle dr(mm): 12~50
  ・Overall Length L(mm): 32~100
  ・Outer Diameter D(mm): 22~75
  
  Linear ball bearings KN..-B-PP, Lightweight range, closed design, sealed on all sides, with relubrication facility, adjustable angle

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Linear ball bearings / steel / open recirculating ball bearing and guideway / KH, LM

  ZEN

  [Specifications]
  ・Material: Standard bearing steel
  ・Seal: None open bearing
  ・Angle compensation: Without misalignment compensation

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / flange selectable (guided) / steel / double bush / lubricating

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / block type / aluminium / anodised / double bush / long version

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / flange selectable / steel / nickel-plated / lubricating

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / steel / double bush / double ring groove / seal

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.18 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / steel / double ring groove / open design / LKBMUUOP

  KBS

  Opening type Linear bushing with slit. Type with seal. Use with hardened shaft of g6 tolerance is recommended. Abundant variety of shaft diameters are available. Since its founding in 1995, the KBS Ltd. has steadily built a domestic following in China. The linear bushings, the company's leading products, top the market in China.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Slide Bushing SMF Type (Circular Flange Type)

  NIPPON BEARING

  [Features]
  · Circular flange type
  · Used for guiding round shafts, and appropriate for compact mechanism designs because space can be used effectively.
  · Can be randomly combined with shafts due to full compatibility with NB slide bushings.
  [Applications]
  · Due to the low-friction linear action and simple structure, this product is suitable for diverse applications, including transport equipment and semiconductor manufacturing equipment.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / steel / double ring groove / with seal / LM

  OZAK

  [Features]
  · LM: Standard (ECOseries) linear bearing, frequent-use shape, optimal for reducing costs.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	6.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / flange selectable / steel / double bush / lubricating

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / block type / aluminium / anodised / single double bush / lubricating

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear Ball Bearings / steel / double ding groove / seal / LMYMUU

  MYT

  Standard linear bushing, single type. Suitable for standard use. Available for a wide range of shaft diameters. MYT is a manufacturer of linear parts based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / steel / open recirculating ball bearing / KH, KLM

  NTN

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear Bushings

  ZEN

  [Specifications]
  ・Material: Standard bearing steel
  ・Seal: None. open bearing
  ・Angle compensation: Without misalignment compensation
  ・Version: Closed version

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / steel / double ring groove / LM-GA

  THK

  [Features]
  · Standard type. Equivalent to LM type of widely used milli size series, but including metal retainer.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / square flange / steel / LKBMKUU

  KBS

  Simple to mount, rectangular flange type linear bushing with seal. Constructed in bearing steel. Wide selection of shaft diameters available. KBS , since its founding in 1995, has steadily built a domestic following in China. The linear bushings, the company's leading products, top the market in China.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Slide Bushing SME Type (Open Type)

  NIPPON BEARING

  [Features]
  · Open type
  · Reduces the effect of deflection when using with a high load or long stroke by supporting the shaft from below with the open part of the housing.
  [Applications]
  · Due to the low-friction linear action and simple structure, this product is suitable for diverse applications, including transport equipment and semiconductor manufacturing equipment.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	55.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear ball bearings / steel / double ring groove / seal / LM-UU

  ZEN

  [Specifications]
  ・Material: Standard bearing steel
  ・Seal: Sealed on all sides
  ・Angle compensation: Without misalignment compensation
  ・Version: Closed version
  ・LM series

  Select to compare

  Configure now
  Starting from∗ ：	5.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Linear ball bearing and housing units / KGBAO..-PP-AS, open design, sealed, greased, relubrication facility, corrosion-resistant design possible

  INA

  [Specifications]
  ・Diameter of Inscribed Circle dr(mm): 12~50
  ・Overall Length L(mm): 32~100
  
  Open design, sealed, greased, with relubrication facility; corrosion-resistant design possible.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	109.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / flange selectable / steel / lubricating

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / block type / stainless steel, steel / SH

  THK

  Case unit is based on LM case unit SC-type with standard linear bushing embedded in small lightweight aluminum case. Compared to the SC type, this type is more suited for compact designs. Any mounting direction is acceptable and lifetime performance is enhanced due to 2 races of load-bearing balls on the case upper face.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	60.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / wide block shape / aluminium / LH, LH-B

  OZAK

  [Features]
  · LH/LH-B: Linear housing and linear bearings. Reduces work time and costs since no housing manufacture is required and as mounting work is reduced.
  · MLH: A rust-proof type with high-level rust-proofing and a more affordable price achieved through the use of stainless steel.
  · ULH: An ultra long service life type with an incorporated ultra bearing.
  · UMLH: A rust resistant type with an ultra long service life

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear ball bearing and housing units / KTFS..-PP-AS, with self-aligning linear ball bearing, sealed, greased, with relubrication facility

  INA

  [Specifications]
  ・Diameter of Inscribed Circle dr(mm): 12~25
  ・Overall Length L(mm): 70~122
  
  With self-aligning linear ball bearing, sealed, greased, with relubrication facility.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	155.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Linear ball bearings / round flange / stainless steel / LMF-M

  THK

  [Features]
  · The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ball cage guidance systems / steel / double ring groove / ST, ST-B

  THK

  Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
  
  [Features]
  · In the ST type, the balls and ball cage are embedded in the inner side the of outer cylinder, which has been precision ground to ensure a cylindrical form
  · The balls are arranged in a staggered form to that the load is equally distributed
  · The ball cage is a machined cage made out of lightweight and highly rigid light alloy.
  · A slide ring and retainer ring are provided on two sides of the internal diameter of the outer cylinder to prevent overrun of the ball cage.
  · With this structure, it is possible to achieve rotating, linear and mixed action with a low friction coefficient.
  · Stroke length can be up to double the range of movement of the ball cage within the outer cylinder
  · Suitable for a wide range of applications where it is necessary to obtain high accuracy at a low price, including the ink roll parts of a printing machine, the work chuck of a punching press work, press feeders, the work head of an electric discharge machine, the correction device of a take-up roll, textile machines, strain measuring equipment, optical measuring device spindle, copiers, etc.
  · Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
  · Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / round flange / steel / LMYMFUU

  MYT

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. This manufacturer is a linear parts manufacturer based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear ball bearings / double flat round flange / steel / long version / LMYMHLUU

  MYT

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. This manufacturer is a linear parts manufacturer based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.73 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Slide Bushing SMK-E Type (Rectangular Flange Type with Pilot)

  NIPPON BEARING

  [Features]
  · Rectangular flange type with pilot
  · Appropriate for compact mechanism designs due to use with round shafts, which permits effective use of space.
  · Can be randomly combined with shafts due to full compatibility with NB slide bushings.
  [Applications]
  · Due to the low-friction linear action and simple structure, this product is suitable for diverse applications, including transport equipment and semiconductor manufacturing equipment.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Slide Bushing SMT-W Type (Double Chamfered Flange Type)

  NIPPON BEARING

  [Features]
  · Double chamfered flange type
  · Appropriate for compact mechanism designs due to effective use of space resulting from use with round shafts.
  · Can be randomly combined with shafts due to full compatibility with NB slide bushings.
  [Applications]
  · Due to the low-friction linear action and simple structure, this product is suitable for diverse applications, including transport equipment and semiconductor manufacturing equipment.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / single double bush / steel / grease nipple / SC

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.69 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spacer washers for linear ball bearings with flange

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear ball bearings / block form / aluminium / anodised / clamping lever

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / square flange / steel / LMYMKUU

  MYT

  Two face flange type for convenient mounting. A single type product. Suitable for use in standard applications. MYT is a manufacturer of linear parts based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Linear ball bearings / flange selectable / steel / long version / LMCF, LMCH, LMCK

  THK

  [Features]
  · Linear bushing of center flange type.
  · Available in 3 types, round, rectangular and round chamfered. Each of these is also available as a long type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...