Oil Free Bushings / Plain Bushings（Page 2）
Filter products by: Type
?* Information on days to ship and prices
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / cast iron / 30B【1-10 Pieces Per Package】
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.- Volume Discount
- Stock
- 2D CAD data available
Configure nowStarting from∗ ： 4.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / plastic / DDK05
DAIDO METAL
Compound bearing (bushing type ) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.
This environmentally friendly, lead- free, self-lubricating bearing requires no additional lubricant and does not use any lead at all.
Daidyne DDK05 is a compound bearing that combines a low-friction polytetrafluoroethylene (PTFE) bearing surface with the strength and dimensional stability of a metal backing.
[Features]
· The bearing surface has such a low coefficient of static and dynamic friction so that the surface runs smoothly without lubrication.
· "Stick Slip" doesn't happen.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.
· Adaptable to operations under high-load, impact load, intermittent operation and reciprocating motion.
· Free from electrostatic induction (when installed, each bearing has an electrical resistance of 1 to 10 Ω per 1cm2).
· Bearing surface has superior chemical resistance and is not affected by solvents such as petroleum and alcohol.
· Will not damage the surface of the engaging component.
· Extended surface life.
· Bearing is lightweight and thin (3 mm at its thickest), so it doesn't take up much space and has a compact design.
· Minimizes operating noise.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.01 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / slotted / SF
ZOB
Multi-layer type flanged oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / guided flange selectable / brass
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / JFB
ZOB
A copper alloy flanged type oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / slotted / PAP P10
PERMAGLIDE
[Specifications]
・Lubrication & Maintenance: Maintenance-free. for dry-running applications
・Material: Leaded
[Features]
・Low installation space requirements
・Extremely easy assembly
・Low friction value
・Good chemical resistance
・Maintenance-free
・P10Configure nowMin. Shipping Days ： 4 Days -
- Promotional pricing ends 31/12/2024
Plain bearing bushes / PTFE
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
plain bearing bushes with flange / steel
MISUMI
[Features] Due to integrated flange specifications, labour hours for assembly can be reduced.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 15.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Plain bearing bushes / flange selectable / composite material / with housing
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / brass / solid lubricant, axial design / SPFG
OILES
Demonstrates high performance at high load and low speed movement positions.
[Features]
· Suitable for rotation, swing and reciprocating motions.
· One bushing can bear radial journal load and thrust load at the same time.
· Machinery accuracy can be improved by increasing the flange thickness accuracy- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 40.87 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / slotted / TMB
OILES
Excellent in load withstand ability and heat resistance.- Volume Discount
- Stock
- 2D CAD data available
Configure nowStarting from∗ ： 2.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / copper alloy / solid lubricant / HA
DAIDO METAL
Oilless bearing for high load (bushing type).- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.15 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / slotted / PAP P14
PERMAGLIDE
[Specifications]
・Lubrication & Maintenance: Maintenance-free. for dry-running applications
・Material: Lead-free
[Features]
・Low installation space requirements
・Extremely easy assembly
・Low friction value
・Good chemical resistance
・Maintenance-free
・P14Configure nowMin. Shipping Days ： 4 Days -
- Promotional pricing ends 31/12/2024
Plain bearing bushes / composite material / 70B
OILES
Can be used without oil, has a low friction coefficient, and has exceptional load resistance.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 1.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / DBS02
DAIDO METAL
Oil-retaining bearing (flanged bushing) with self-lubricating characteristics.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.39 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / thin-walled / 30B
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 11.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Economy
Plain bearing bushes / brass / solid lubricant / Thin-walled / SP5B
OILES
Using a unique metal material with high strength and excellent abrasion resistance, it features secure performance and long life while remaining thin.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 17.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / cast iron / 30F
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 6.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / plastic (iglidur) / PFM
IGUS
Due to thermal stability and low water absorption, the iglidur® P bearings are among the most dimensionnally strong allround bearings under varying environmental conditions. iglidur® P bearings are recommended for oscillating and rotating movements at average loads.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 3.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Bushes, Design J Similar to DIN 1850-3 Made from Sintered Bronze
MAEDLER
Material: Sintered bronze similar SINT A50.
Self lubricating, oil coated, pressed ready-to-install and calibrated.
After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8.
Edges chamfered at 45º, at choice of the manufacturer.
Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10.
No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal.- Volume Discount
Configure nowStarting from∗ ： 1.27 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Plain bearing bushes / brass / solid lubricant / SGB
OILES
High strength brass alloy guide bushing. Can be used for reciprocating motion. Tightening with hexagon socket set screws, etc., is recommended for use.- 2D CAD data available
Configure nowStarting from∗ ： 103.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / central flange selectable / brass / with housing / seal selectable
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 30.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / plastic (iglidur) / PSM
IGUS
Due to thermal stability and low water absorption, the iglidur® P bearings are among the most dimensionnally strong allround bearings under varying environmental conditions. iglidur® P bearings are recommended for oscillating and rotating movements at average loads.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 3.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / SAF
DAIDO METAL
Oilless bearing for high load (flanged bushing type).
[Features]
· Copper based oilless bearing for heavy load applications into which solid lubricant plugs are embedded.
· Choose base metal and plug according to the application and working conditions.
· Maintenance-free, no need to supply oil.
· Excellent wear resistance properties.
· Excellent wear resistance properties are exhibited in applications where oil film formation is difficult such as reciprocating, intermittent, and oscillating motions under conditions of high load and low speed.
· Low friction coefficient.
· Can be used under a wide range of temperatures from low to high.
· Free design of shape and size is possible.
· Superior corrosion and chemical resistance.
· Can be used in river or in sea water, in special liquids where chemical resistance of the metal base and solid lubricant is needed, and in gas where oil supply is difficult.
· Superior impact resistance.- Volume Discount
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / slotted / SF
ZOB
Multi-layer straight type oil free bushing designed with cost in mind.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / sintered metal / CBB
OILES
A solid lubricant has been dispersed to allow for use in any movement direction and achieves excellent performance in micro movements as well.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 16.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / composite / slotted / LFF
OILES
Can be used without oil, has thin walls, and is lightweight, and allows for a more compact size.- Volume Discount
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Lubrication-Free Bushing Block Type Housing Unit, Tall / Compact Type
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 29.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Configure nowStarting from∗ ： 1.93 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / brass / solid lubricant / SGF
OILES
Suitable for rotation, swing and reciprocating motions. Tightening with hexagon socket set screws, etc., is recommended for use.- 2D CAD data available
Configure nowStarting from∗ ： 97.67 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / central flange selectable / brass
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / brass / solid lubricant / SPBL
OILES
Demonstrates high performance at high load and low speed movement positions.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 27.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / composite material / DBS02
DAIDO METAL
Oil-retaining bearing (bushing type) with self-lubricating characteristics.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes / plastic / 80B
OILES
Can be used oil free and provides superior resistance to load and abrasion.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / slotted / DDK05
DAIDO METAL
Compound bearing (flanged bushing type ) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.
[Features]
· The bearing surface has such a low coefficient of static and dynamic friction so that the surface runs smoothly without lubrication.
· So-called "StickSlip" does not occur.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.
· Adaptable to operations under high-load, impact load, intermittent operation and reciprocating motion.
· Free from electrostatic induction (when installed, each bearing has an electrical resistance of 1 to 10 Ω per 1cm2).
· Bearing surface has superior chemical resistance. It is also not affected by solvents, such as petroleum and alcohol.
· Will not damage the surface of the engaging component.
· Extended surface life.
· Bearing is lightweight and thin (3 mm at its thickest), so it does not require much space. In other words, the design is more compact.
· Minimizes operating noise.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing / Bushes / composite material / PAP P11
PERMAGLIDE
[Specifications]
・Material: Leaded
[Features]
・Low installation space requirements
・Extremely easy assembly
・Low friction value
・Good chemical resistance
・P11Configure nowMin. Shipping Days ： 4 Days -
Lubrication-Free Bushing Block Type Housing Unit, Wide / Standard Type
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 37.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Configure nowStarting from∗ ： 23.56 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with housing with seal / LFG
OILES
Can be mounted easily and is compatible with ball bearing types.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 17.54 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Plain bearing bushes with flange / sintered metal / 54F
OILES
Provides high friction resistance when oil film formation is discouraged due to reciprocating motion, intermittent operation, and swing motion.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 9.32 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / Composite / PCM B
SKF
[Specifications]
・I.D. d(mm): 16
・O.D. D(mm): 18
・Overall Length L(mm): 10
・Material: Leaded
[Features]
・Maintenance-free operation
・Cost-effective with long service life
・High operating temperatures
・High load carrying capacity
・High sliding velocity and small operating clearanceConfigure nowStarting from∗ ： 3.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Plain bearing / Bushes / composite material / with lubrication pocket / DIN ISO 3547 / PAP P20
PERMAGLIDE
[Specifications]
・Lubrication & Maintenance: Low-maintenance. for lubricated applications
・Material: Leaded
[Features]
・Low installation space requirements
・Extremely easy assembly
・Low friction value
・Good chemical resistance
・P20
・DIN ISO 3547Configure nowMin. Shipping Days ： 4 Days -
Oil-free bushes / P10 series
PERMAGLIDE
[Specifications]
・I.D. d(mm): 4-300
・O.D. D(mm): 5.5-305
[Features]
・Low installation space requirements
・Extremely easy assembly
・Low friction value
・Good chemical resistance
・P10Configure nowStarting from∗ ： 0.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Plain bearing with collar, sintered bronze (23761)
NORELEM
· Self-lubricating
· Maintenance-free
· Ready to installConfigure nowStarting from∗ ： 1.82 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Plain bearing cylindrical, sintered bronze (23760)
NORELEM
· Self-lubricating
· Maintenance-free
· Ready to installConfigure nowStarting from∗ ： 1.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Metallic |
| Resin Group |
| Multi-Layer |
| Environment |
| I.D. d(mm) |
| O.D. D(mm) |
| Overall Length L(mm) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm²·m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Shape |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OILES | DAIDO METAL | ZOB | MISUMI | ZOB | PERMAGLIDE | MISUMI | MISUMI | MISUMI | OILES | OILES | DAIDO METAL | PERMAGLIDE | OILES | DAIDO METAL | OILES | OILES | OILES | IGUS | MAEDLER | OILES | MISUMI | IGUS | DAIDO METAL | ZOB | OILES | OILES | MISUMI | OILES | OILES | MISUMI | OILES | DAIDO METAL | OILES | DAIDO METAL | PERMAGLIDE | MISUMI | MISUMI | OILES | OILES | SKF | PERMAGLIDE | PERMAGLIDE | NORELEM | NORELEM |
| Product Series | Plain bearing bushes / cast iron / 30B【1-10 Pieces Per Package】 | Plain bearing bushes / flange selectable / composite material / with housing | Plain bearing bushes with flange / brass / solid lubricant, axial design / SPFG | Plain bearing bushes / brass / solid lubricant / Thin-walled / SP5B | Bushes, Design J Similar to DIN 1850-3 Made from Sintered Bronze | Plain bearing bushes / central flange selectable / brass / with housing / seal selectable | Plain bearing bushes with flange / composite / slotted / LFF | Lubrication-Free Bushing Block Type Housing Unit, Tall / Compact Type | Plain bearing bushes with flange / brass / solid lubricant / SGF | Lubrication-Free Bushing Block Type Housing Unit, Wide / Standard Type | Plain bearing / Bushes / composite material / with lubrication pocket / DIN ISO 3547 / PAP P20 | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| Starting from∗ | 4.25 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.01 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.06 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 19.27 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 3.49 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | - | 3.27 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 15.37 € *Unit price with basic configuration Volume Discount | 13.60 € *Unit price with basic configuration Volume Discount | 40.87 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.24 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 9.15 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | - | 1.12 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.39 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 11.45 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 17.35 € *Unit price with basic configuration Volume Discount | 6.04 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 3.68 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.27 € *Unit price with basic configuration Volume Discount | 103.03 € *Unit price with basic configuration | 30.11 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 3.66 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 10.73 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.74 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 16.60 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.26 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 29.97 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.93 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 97.67 € *Unit price with basic configuration | 19.27 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 27.30 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.45 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.41 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.71 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | - | 37.91 € *Unit price with basic configuration Volume Discount | 23.56 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 17.54 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 9.32 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 3.53 € *Unit price with basic configuration | - | 0.33 € *Unit price with basic configuration | 1.82 € *Unit price with basic configuration | 1.19 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | 4 Days | Same day | 5 Days | 5 Days | Same day | Same day | Same day | 4 Days | Same day | Same day | Same day | 6 Days | Same day | Same day | 4 Days | 8 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 8 Days | Same day | Same day | Same day | Same day | Same day | 4 Days | 5 Days | Same day | Same day | Same day | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
| Type | Straight Type | Straight Type | Shouldered Type | Flanged | Shouldered Type | - | Straight Type | Flanged | Flanged | Shouldered Type | Straight Type | Straight Type | - | Straight Type | Shouldered Type | Straight Type | Straight Type | Shouldered Type | Shouldered Type | - | Straight Type | Flanged | Straight Type | Shouldered Type | Straight Type | Straight Type | Shouldered Type | Housing Unit Type | Shouldered Type | Shouldered Type | Flanged | Straight Type | Straight Type | Straight Type | Shouldered Type | - | Housing Unit Type | Housing Unit Type | Flanged | Shouldered Type | - | - | - | - | - |
| Metallic | Cast Iron | - | - | Brass | Brass | - | - | Cast Iron | - | Brass | - | Brass | - | - | - | Cast Iron | Brass | Cast Iron | - | - | Brass | Brass | - | Brass | - | Sintered Stell | - | Brass | - | Brass | Brass | Brass | - | - | - | - | Brass | Cast Iron | - | Sintered Stell | - | - | - | - | - |
| Resin Group | - | - | - | - | - | - | PTFE (Polytetrafluoroethylene) | - | - | - | - | - | - | - | POM (Polyacetal) | - | - | - | High Performance Polymer Group | - | - | - | High Performance Polymer Group | - | - | - | - | - | PTFE (Polytetrafluoroethylene) | - | - | - | POM (Polyacetal) | - | - | - | - | - | - | - | - | - | - | - | - |
| Multi-Layer | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - | - | Polyacetal | - | Steel, Copper Type Sintered Alloy | - | - | Steel, Sintered Bronze, Polyacetar | - | - | - | - | - | - | - | - | - | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - | - | - | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - | - | - |
| Environment | Standard | Standard / In Oil | Standard / In Oil | - | Standard / In Oil | - | Food | - | Food | Standard / Heat Resistant / Foreign Object Resistant | Standard / Heat Resistant / In Oil | Standard / Heat Resistant / Foreign Object Resistant | - | Standard / In Oil | Standard | Standard | Foreign Object Resistant / Vibration Resistant / In Oil / In Chemical / Food | Standard | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical | - | Standard / In Chemical | - | Standard / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical | Standard / Heat Resistant / Foreign Object Resistant | Standard / In Oil | Standard / Vibration Resistant | Standard / In Oil | - | Standard / Heat Resistant / In Water / In Seawater / In Chemical | Standard / In Chemical | - | Standard / Foreign Object Resistant / In Water / In Seawater | Standard | Standard | Standard / In Oil | - | - | - | Standard / In Oil | Standard | - | - | - | - | - |
| I.D. d(mm) | 5 ～ 100 | 3 ～ 160 | 3 ～ 50 | 8 ～ 30 | 5 ～ 50 | 6 ～ 40 | 3 ～ 20 | 8 ～ 30 | 6 ～ 16 | 6 ～ 80 | 5 ～ 100 | 6 ～ 150 | 6 ～ 40 | 5 ～ 160 | 3 ～ 35 | 5 ～ 20 | 6 ～ 25 | 5 ～ 60 | 4 ～ 80 | - | 40 | 6 ～ 30 | 3 ～ 95 | 6 ～ 120 | 3 ～ 50 | 12 ～ 65 | 3 ～ 60 | 10 ～ 30 | 3 ～ 50 | 40 | 8 ～ 30 | 12 ～ 160 | 3 ～ 30 | 2 ～ 50 | 3 ～ 60 | 4 ～ 80 | 16 ～ 30 | 8 ～ 30 | 16 ～ 20 | 3 ～ 30 | 16 | 8 ～ 160 | 4 ～ 300 | - | - |
| O.D. D(mm) | 8 ～ 125 | 5 ～ 165 | 4.6 ～ 55 | 12 ～ 38 | 9 ～ 60 | 8 ～ 44 | 6 ～ 26 | 15 ～ 45 | 12 ～ 28 | 10 ～ 96 | 7 ～ 105 | 10 ～ 170 | 8 ～ 44 | 7 ～ 165 | 5 ～ 39 | 7 ～ 24 | 8 ～ 29 | 8 ～ 75 | 5.5 ～ 85 | - | 60 | 12 ～ 45 | 4.5 ～ 100 | 10 ～ 140 | 5 ～ 55 | 18 ～ 80 | 4.6 ～ 65 | - | 6 ～ 60 | 55 | 12 ～ 38 | 18 ～ 180 | 5 ～ 34 | 4 ～ 55 | 4.6 ～ 65 | 5.5 ～ 85 | - | 12 ～ 38 | 28 ～ 32 | 6 ～ 40 | 18 | 10 ～ 165 | 5.5 ～ 305 | - | - |
| Overall Length L(mm) | 5 ～ 80 | 3 ～ 100 | 3 ～ 40 | 20 ～ 70 | 10 ～ 60 | - | 3 ～ 30 | 20 ～ 70 | 19 ～ 37 | 11 ～ 90 | 5 ～ 95 | 8 ～ 150 | - | 4 ～ 125 | 3 ～ 40 | 5 ～ 30 | 8 ～ 25 | 5 ～ 80 | 4 ～ 100 | - | 60 | 37 ～ 128 | 3 ～ 100 | 10 ～ 80 | 3 ～ 60 | 10 ～ 80 | 3 ～ 60 | 37 ～ 128 | 5 ～ 50 | 70 | 20 ～ 70 | 20 ～ 150 | 3 ～ 40 | 2 ～ 50 | 3 ～ 60 | - | 42 ～ 128 | 15 ～ 100 | 37 ～ 42 | 4.5 ～ 30 | 10 | - | - | - | - |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | - | 0.3 to 1.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | - | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | - | 1.1 to 2.0 | 1.1 to 2.0 | 0.3 to 1.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | 0.3 to 1.0 | 1.1 to 2.0 | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | - | 1.1 to 2.0 | 0.3 to 1.0 | 2.1 to 5.0 | 1.1 to 2.0 | - | - | - | - | - |
| Maximum Allowable PV Value(N/mm²·m/s) | 1.25 | 3.6 | 3.6 | 1.65-3.25 | 1.65 | - | 1 | 0.5 | 2.45 | 1.65 | 1.65 | 1.65 | - | 3.25 | 2.45 | 1.25 | 1.65 | 1.25 | 0.39 | - | 1.65 | 1.65-3.25 | 0.39 | 1.65 | 3.6 | 1.63 | 3.6 | 1.65-3.25 | 1 | 1.65 | 1.65 | 1.65 | 2.45 | 2.45 | 1.72 | - | 1.65-3.25 | 0.5 | 3.6 | 1.65 | - | - | - | - | - |
| Max. Allowable Surface Pressure P(N/mm2) | 10 | 49 | - | 29 | - | - | 7 | 5 | 17.5 | 29 | 24.5 | 29 | - | 24.5 | 17.5 | 10 | 49 | 10 | 50 | - | 29 | 29 | 50 | 29 | - | 24.5 | 49 | 29 | 7 | 29 | 29 | 49 | 17.5 | 17.5 | 137 | - | 29 | 5 | 49 | 10 | - | - | - | - | - |
| Max. Allowable Velocity V(m/s) | 1 | 0.65 | 0.65 | 0.5-1.0 | 0.5 | - | 1.65 | 0.15 | 0.85 | 0.5 | 0.4 | 0.5 | - | 1.15 | 0.85 | 1 | 0.25 | 1 | 1 ～ 4 | - | 0.5 | 0.5-1.0 | 1 ～ 4 | 0.5 | 0.65 | 0.5 | 0.65 | 0.5-1.0 | 1.65 | 0.5 | 0.5 | 0.25 | 0.85 | 0.85 | 1 | - | 0.5-1.0 | 0.15 | 0.65 | 0.85 | - | - | - | - | - |
| Housing Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Square Flanged | - | - | - | - | - | - |
| Housing Material | - | - | - | - | - | - | - | - | Aluminum | - | - | - | - | - | - | - | - | - | - | - | - | Steel | - | - | - | - | - | Aluminum | - | - | - | - | - | - | - | - | Aluminum | Steel | Aluminum | - | - | - | - | - | - |
| Length Type | Single | - | Single | - | Single | - | - | - | Single | Single | Single | - | - | Single | - | Single | Single | Single | - | - | - | Double | - | - | Single | Single | Single | Single / Double | Single | - | - | Single | - | Single | - | - | Single / Double | Single / Double | Single | Single | - | - | - | - | - |
| Mounting Shaft Fits | h7 | - | h7 | - | d8 / e7 / g6 / f8 | - | - | - | - | e7 | h7 | - | - | h7 | - | h7 | e7 | h7 | - | - | - | - | - | - | h7 | g6 | - | - | h6 | - | - | d8 | - | h7 | - | - | - | - | e7 | h7 | - | - | - | - | - |
| Mounting Hole Fits | H7 | H7 | - | - | - | - | H7 | - | - | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | - | H7 | H7 | - | H7 | H7 | - | H7 | H7 | - | H7 | H7 | H7 | H7 | - | - | - | H7 | H7 | - | - | - | - | - |
| Thickness T(mm) | - | 1 ～ 2.5 | 0.8 ～ 2.5 | - | 2 ～ 5 | - | - | - | - | - | - | - | - | - | 1 ～ 2 | - | 1 ～ 2 | - | 1 ～ 3 | - | - | - | 0.75 ～ 2.5 | - | 1 ～ 2.5 | - | - | - | - | - | - | - | 1 ～ 2 | - | 0.8 ～ 2.5 | - | - | - | - | - | - | - | - | - | - |
| Lubrication Condition | Regular Lubrication | Unlubricated | Unlubricated | - | Unlubricated | - | - | - | - | Unlubricated | Unlubricated | Unlubricated | - | Unlubricated | Unlubricated | Regular Lubrication | Unlubricated / Regular Lubrication | Regular Lubrication | Unlubricated | - | Unlubricated / Regular Lubrication | - | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | - | Unlubricated | Unlubricated / Regular Lubrication | - | Unlubricated | Unlubricated | Unlubricated | Unlubricated | - | - | - | Unlubricated | Unlubricated | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Metallic
-
Resin Group
-
Multi-Layer
-
Environment
-
I.D. d(mm)
-
O.D. D(mm)
- 3
- 3.5
- 4
- 4.5
- 4.6
- 5
- 5.5
- 5.6
- 6
- 7
- 8
- 9
- 10
- 10.1
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 65
- 67
- 70
- 74
- 75
- 77
- 80
- 85
- 90
- 95
- 96
- 100
- 105
- 110
- 115
- 117
- 118
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 155
- 156
- 160
- 165
- 170
- 180
- 185
- 190
- 205
- 255
- 305
-
Overall Length L(mm)
- 1
- 1.5
- 2
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 3.5
- 3.8
- 3.9
- 4
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 5
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
- 6
- 6.5
- 6.8
- 7
- 7.25
- 7.5
- 7.7
- 7.8
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 11.8
- 12
- 12.5
- 13
- 13.5
- 13.8
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 20
- 21
- 21.5
- 22
- 23
- 23.5
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 28
- 29
- 30
- 31.5
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 38.5
- 39
- 40
- 42
- 42.5
- 45
- 46
- 47
- 48
- 50
- 51
- 52
- 52.5
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 94
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 130
- 140
- 141
- 150
- 158
- 164
- 170
- 188
- 500
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm²·m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Shape
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Categories related to Oil Free Bushings / Plain Bushings
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.