Indexing Plungers（All Stainless：Not Compliant）

?* Information on days to ship and prices

• • Promotional pricing

  

  Index Bolt With Hexagon Collar And Locking

  HALDER

  [Features]
  · For index holes.
  · Use the distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXX

  NABEYA BI-TECH

  Indexing or positioning pin. Good abrasion resistance.
  
  [Features]
  - Indexing or positioning pin.
  - New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Bolt With Mounting Flange, Horizontal

  HALDER

  [Features]
  · Use washers (For example, ISO7092) for mounting.
  · On types with locks, rotate the knob 90 degrees to stop the notch moving.
  On types with holding mechanisms, pull the knob and rotate it approximately 70 degrees to keep the pin in its withdrawn state.
  · Operating temperature range: -30 to +80°C.
  · Up to 100°C on types with rings.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Plungers

  TOSHIN CASTER

  Simple, sturdy structure for easy, safe locking/unlocking. Optimal for equipment that performs positioning or height adjustment.
  
  [Features]
  - Lever-type indexing plunger with simple structure, high strength, and safe design.
  - When locked, the design prevents it from coming off due to accidental shock or contact.
  - When unlocked, the lever can be pulled up, retracted, and retained on the opposite side.
  - Whether locked or unlocked, the lever will not get in the way.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring latches with flange for surface mounting / GN 722.2

  GANTER

  Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Index Plunger PMX

  NABEYA BI-TECH

  Simple structure index plunger.
  [Features]
  · Superior cost performance.
  · For all pin diameters, coarse thread and fine thread are standardized.
  · Can select main body material quality and whether or not to include a lock nut using the product code.
  [Applications]
  · For positioning workpieces.
  · For attaching and detaching workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (With No Knob) (SDX-N)

  IMAO CORPORATION

  The operating unit can be remotely operated by connecting with screws. There is no hexagonal part so it can be mounted in a small space. Available in steel and stainless steel.
  
  [Features]
  - A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
  - If performing remote operation, it can be joined with the operation screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (Long Stroke) (NDXNE)

  IMAO CORPORATION

  As the nose length is long, It can be inserted deeply into the other side. Available in steel and stainless steel.
  
  [Features]
  - With the spring plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-5

  KONISHI MFG

  Indexing plungers with a grip ball attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger - PDV

  NABEYA BI-TECH

  [Features]
  · Index plunger to control the coming and going of the pin by turning the lever.
  · Standardized three types of operational variations.
  ■ [PDV-A] [PDV-AK]-Standard Type
  · The pin retracts into the body by turning the lever 90°.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-B] [PDV-BK]-Retention Type
  · The pin retracts into the body by turning the lever 120°.
  · The pin will not return, even if the lever is released while in the 120° position.
  · Turn the lever slightly in the opposite direction and the pin will returned to its original position via the action of the integrated spring.
  ■ [PDV-C] [PDV-CK]-Lock Function Type
  · The pin retracts into the body turning the lever 120°.
  · The guide pin then fits into the slot on the main body, locking the unit with the pin retracted.
  · To unlock, pull the lever out slightly and rotate it in the opposite direction.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-A] [PDV-B][PDV-C]-Without Lock Nut
  · Use loosening prevention service.
  ■ [PDV-AK] [PDV-BK][PDV-CK]-With Lock Nut for Fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PHY

  NABEYA BI-TECH

  Compact indexing plunger.
  
  [Features]
  - A compact indexing plunger.
  - Pull the knob and rotate 30° to lock with the pin retracted.
  - To unlock, pull the knob slightly and rotate 30°.
  - Returns to its original position via internal spring action.
  - Lock mechanism built into the knob.
  - Overall length is the same as a PHX without a lock mechanism.
  - Pin is nickel-plated for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (Short Model) (NDXNS)

  IMAO CORPORATION

  The threaded part is short so it is ideal for mounting to plates, etc.
  
  [Features]
  - With the index plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.
  - Recess processing has been performed on the threaded part

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (Nose Lock Model) (GDX)

  IMAO CORPORATION

  The nose can be pulled out and put in by turning the lever, giving excellent operation efficiency. Steel and stainless steel types are provided.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.16 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Lever Plungers (Stainless Steel) ILP-Sus

  KONISHI MFG

  Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	111.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXV

  NABEYA BI-TECH

  Turn the lever to control pin insertion on the indexing plunger.
  
  [Features]
  - Pin retracts into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXV-B/BK.
  - Hardened pin for good abrasion resistance.
  - PXV-A and PXV-B have no lock nut.
  - PXV-AK and PXV-BK have a lock nut for fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PBX

  NABEYA BI-TECH

  Indexing plungers integrated with a mounting flange. Suitable for mounting to panel surfaces on equipment/devices, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PBY

  NABEYA BI-TECH

  [Features]
  · An indexing plunger with an integrated mounting flange.
  · Suitable for mounting equipment and devices on walls etc.
  ·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
  ·To unlock, pull the knob out slightly and rotate it 90°.
  · Returns to its original position via the action of the integrated spring.
  · For mounting, please use commercially available hex socket bolts, etc.
  · Using slotted holes allows you to adjust the position after mounting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.71 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXVS

  NABEYA BI-TECH

  [Features]
  - Stainless steel.
  - Superior corrosion resistance.
  - Turn the lever to control the pin insertion.
  - Retractable into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXVS-B/BK.
  - Nickel plating for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	63.87 €
  	Special price
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers Simple Ring Type IPR

  KONISHI MFG

  Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PDX

  NABEYA BI-TECH

  [Features]
  · A new type of indexing plunger.
  · Features a lock mechanism.
  · The PDX-A/AK, with knob, have been standardized.
  · For the PDX-A/AK, pin insertion is controlled via the knob.
  · Turning the knob 90° clockwise after pulling it out allows the guide pin to fit into the slot, locking the unit with the pin retracted.
  · To unlock, pull the knob out slightly and rotate it 90° counterclockwise.
  · Returns to its original position via the action of the integrated spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.98 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PXY

  NABEYA BI-TECH

  The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PLY

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.93 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (WDX)

  IMAO CORPORATION

  Fusion bonding and welding types.
  
  [Features]
  - A hand operated spring plunger. Pull the knob and the nose retracts, easily cancelling the positioning; let go of the knob and the nose will return to its original position by the internal spring.
  - The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled out and the nose is retracted.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.85 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-6

  KONISHI MFG

  Indexing plungers with no tee handle attached to the knob.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers IPWN

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.83 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PHX

  NABEYA BI-TECH

  [Features]
  - Compact indexing plunger.
  - Metal part unexposed after mounting.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.15 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers, PMY

  NABEYA BI-TECH

  Simple-structure indexing plungers. Excellent cost performance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers, PPLY

  NABEYA BI-TECH

  Precise positioning indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	105.62 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Indexing Plunger PCX

  NABEYA BI-TECH

  [Features]
  - A new type of indexing plunger.
  - Pin usually retracted in the main unit.
  - With lock mechanism.
  - The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.47 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PLX

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. For indexing or positioning.
  
  [Features]
  - Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
  - For indexing or positioning.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PPLX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger for accurate positioning.
  - H7 pin diameter tolerance.
  - G6 hole tolerance recommended for the mating side.
  - Use with the positioning bushings for precise positioning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.83 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PXZ

  NABEYA BI-TECH

  [Features]
  - All main body threads can be embedded in equipment; only the knob is exposed.
  - Attractive look.
  - Hardened (steel) or nickel-plated (stainless steel).
  - Superior abrasion resistance.
  - New standardization for PXZS-Z and PXZS-SK with stainless steel knob.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (LBLT)

  IMAO CORPORATION

  Simple type index plunger ideal for temporary work fixing, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers

  NABEYA

  Rotating the operation knob 90° enables fixation with the pin retracted.
  
  [Features]
  · Pulling and rotating the operation knob 90° enables locking with the pin retracted.
  · To unlock, pull the operation knob a little and rotate it by 90°.
  · Returns to its original position via internal spring action

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	52.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers Flange Type IPF

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. An index plunger with a fixed countersunk screw.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.74 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plungers Simple Type IP

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-1

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.25 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Lever Plungers ILP

  KONISHI MFG

  Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	77.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger IP-3

  KONISHI MFG

  This is a buttonless indexing plunger (IP-3). A lock nut is included.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers Flange Type (with Lock Function) IPFL

  KONISHI MFG

  Pulling the knob and rotating it 90° locks the product with the center pin in a retracted state. Returning the knob to its original position releases the lock and the center pin returns to its original position. Flat head screw fixed type indexing plungers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.83 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger PSX

  NABEYA BI-TECH

  Short type that can be mounted directly to a thin frame.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers, PSY

  NABEYA BI-TECH

  The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Indexing Plunger - PFX

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PFY

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
  · Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
  · The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plunger PPX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger that can be mounted on a thin plate.
  - Optimal for positioning and fixing the cases/covers of electronic/communication equipment.
  - Fixing nut can be removed.
  - Mount with a plate clamped with the fixing nut.
  - Two types of pin lengths standardized for each pin diameter.
  - Nickel-plated pin.
  - Superior abrasion resistance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.02 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

Loading...