Stepping Motors（Driving mode：Unipolar）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series
SHINANO KENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DVC24V.
Error output function.
· Abundant protection functions (excess heating, voltage and current).Configure nowStarting from∗ ： 218.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Built-in Controller Stepping Motor "SSA-TR Series"
SHINANO KENSHI
<Features>
● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.
● It is easy to set the operation with the included dedicated application.
● Various operations can be programmed in 8 tables.
● Micro step division (1, 2, 4, 16) selectable from 4 levels.
● Design with special bracket for high heat dissipation.
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.Configure nowStarting from∗ ： 197.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
5-Phase Micro step driver and stepping motor set CSA-UB series
SHINANO KENSHI
5 phase equivalency at with 2 phases at low cost
[Features]
· 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
· A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
· Choose from 16 levels (1 to 128).
· 16 step current setting: 0 to 3.0A (Max).
· With forward rotation / reverse rotation limit input.
· Auto power down functionConfigure nowStarting from∗ ： 171.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series
SHINANO KENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70XH90XD33 mm, 190 g.Configure nowStarting from∗ ： 331.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit
SHINANO KENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DC24V.
· Error output function.
· Abundant protection functions (excess heating, voltage and current).Configure nowStarting from∗ ： 281.92 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Built-in Speed Controller Stepping Motor "SSA-VR Series"
SHINANO KENSHI
<Features>
● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
● Abnormal rotation detection and automatic recovery are possible with the motor alone.
● Speed control is made simple with analog input.
● Wide speed control range (0 to 1800r/min).
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.Configure nowStarting from∗ ： 257.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit
SHINANO KENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.Configure nowStarting from∗ ： 393.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Square flange dimensions A(mm) |
| Power Supply |
| Voltage Specifications |
| Control method |
| Step angle(°) |
| Holding torque (classification)(N·m) |
| Reduction Gear |
| Driving mode |
| Backlash(°) |
|
|
|
|
|
|
| |
| Brand | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI |
| Product Series | Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series | 5-Phase Micro step driver and stepping motor set CSA-UB series | Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series | Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit | |||
| Starting from∗ | 218.09 € *Unit price with basic configuration | 197.39 € *Unit price with basic configuration | 171.17 € *Unit price with basic configuration | 331.30 € *Unit price with basic configuration | 281.92 € *Unit price with basic configuration | 257.47 € *Unit price with basic configuration | 393.69 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days |
| Type | Set Product | Motor | Set Product | Set Product | Set Product | Motor | Set Product |
| Square flange dimensions A(mm) | 28 ～ 60 | 42 ～ 60 | 28 ～ 60 | 28 ～ 42 | 28 ～ 60 | 42 ～ 56.4 | 28 ～ 60 |
| Power Supply | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase |
| Voltage Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications |
| Control method | Open loop | Open loop | - | Open loop | Open loop | Open loop | Open loop |
| Step angle(°) | 1.8 | 0.18 ～ 1.8 | 1.8 | - | 1.8 | 0.18 ～ 1.8 | - |
| Holding torque (classification)(N·m) | 0.1 or Less ～ Up to 3 | Up to 0.3 ～ Up to 0.9 | 0.1 or Less ～ Up to 3 | Up to 0.2 ～ Up to 0.5 | 0.1 or Less ～ Up to 3 | Up to 0.9 | 0.1 or Less ～ Up to 3 |
| Reduction Gear | N/A / Available | N/A / Available | N/A | N/A | N/A / Available | N/A / Available | N/A / Available |
| Driving mode | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar | Unipolar |
| Backlash(°) | - | 2 | - | - | - | 2 | - |
Loading...
Filter by:
-
Type
- Motor
- Driver Unit
- Motor Unit
- Set Product
-
Square flange dimensions A(mm)
-
Power Supply
-
Voltage Specifications
- DC Specifications
- 200 AC Specification
-
Control method
- Open loop
- Closed Loop
-
Step angle(°)
-
Holding torque (classification)(N·m)
- 0.1 or Less
- Up to 0.2
- Up to 0.3
- Up to 0.4
- Up to 0.5
- Up to 0.6
- Up to 0.7
- Up to 0.8
- Up to 0.9
- Up to 1
- Up to 1.2
- Up to 1.3
- Up to 1.4
- Up to 1.7
- Up to 1.8
- Up to 1.9
- Up to 2
- Up to 3
- Up to 4
- Up to 5
- Up to 10
- Up to 15
- Up to 20
- Up to 30
* -0.2 represents > 0.1/≤ 0.2.
-
Reduction Gear
- N/A
- Available
-
Driving mode
-
Backlash(°)
Brand
-
- SHINANO KENSHI (7)
- SMC (0)
- NORELEM (0)
- ORIENTAL MOTOR (0)
CAD data type
-
- 2D
- 3D
Categories related to Stepping Motors
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.