Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 9.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 4.72 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Keyless Bushings / Standard
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.76 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Compact and self-centering locking device KBS61
KBK
· Large clamping range
· High centering capability and good concentricity properties
· Compact design
· Available starting from 5mm shaft diameter
· Torque range: 6 - 1900Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.35 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushings / Compact
MISUMI
[Features] It has a centring function and is suitable for a smaller hub.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushings / Easy Mounting (Nut)
MISUMI
[Features] It can be easily installed by simply tightening 1 nut.- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 40.66 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Self-centering locking device for small hubs KBS80
KBK
· For high concentricity and perpendicularity of the components
· No axial displacement during assembly
· Self-centering
· Torque range: 12 – 17500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 12.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushings / Thin
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.46 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Elements 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Keyless Bushings / Straight for High Torque
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 105.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies BAR
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Configure nowStarting from∗ ： 24.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 9.33 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Keyless Bushings / Straight
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.14 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mecha Lock MA, Standard Type
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressure- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
POSI LOCK G
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Can support heavy loads.
[Features]
· Tightening the clamping bolt moves the 2 taper rings in the shaft direction.
· At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
· The PSL-G has an even transmission ability due to its simple construction and strong components, and it can also cope with heavy loads.
· Short in shaft direction, does not take up more space than necessary.
· PSL-G-C (simple rust-proofing specification) is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 54.73 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 19.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
· This facilitates great torque transmission.
· Boss hole and shaft hole fitting is up to H8/h8- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.27 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mega Lock, MC, Standard Type (Aluminum Specifications)
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard
· Supports aluminum timing pulleys (steel is also usable)
· Reduced number of bolts shortens attachment/detachment time
· With a spigot joint on the back, it can also be used as a bearing retainer
· With low surface pressure, it is also ideal for hollow shafts- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8.18 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Self-centering locking device KBS13
KBK
· For connections in the smallest places
· Very short design
· Self-centering
· Torque range: 310 - 46980Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Short locking device for higher tolerances KBS40
KBK
· Costs-effective
· Very short
· Large span
· Non self-centering
· Torque range: 255 - 68000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.77 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mecha Lock MA, Standard High-Torque Type
ISEL
Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.
[Features]
· 21 models that have shaft diameters standardized from ø25 to ø150.
· High torque transmission specifications.
· With centering function.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining, wide range of options available during design- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 100.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mecha-Lock MN Series, Nut Type
ISEL
Easy-to-tighten nut type key-less bushing (fastening fitting).
[Features]
· Tightening the nut shortens the tightening time.
· Easiest assembly among mechanical lock series.
· Centering can be done by simply tightening both the sides.
· Also contributes to reduction of hub outer diameter.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Ideal for installations with thinner hub thickness and low torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Self-centering locking Device with flange KBS16
KBK
· For connections in the smallest places
· Very short design
· No axial displacement during assembly
· Self-centering
· Torque range: 260 - 36100Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies 7061
RINGFEDER
Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Shrink Disc 4161
RINGFEDER
Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
OPTIBELT Taper Bushing with Metric Bore
OPTIBELT
[Specifications]
・Shaft Bore Dia. d(Ø): 14-100
・Allowable Torque(N•m): 5.7-195
・Overall Length W(mm): 22.3-114.3
・Keyway: DIN 6885 Part 1, Shallow key
・Engineering material: 0.6020 (EN-GJL 200)Configure nowStarting from∗ ： 4.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Shrink Disc
KBK
· For hollow shaft connections
· Applicable for high bending moments
· Short overall length
· Good concentricity properties
· Self-centering and self-releasing
· Torque range: 40 - 327000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.41 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
POSI LOCK D
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
[Features]
· Tighten the clamping bolt to move the outer ring in the shaft direction.
· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
· Short in shaft direction, does not take up more space than necessary.
· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 73.77 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing, Standard Type (with Centering Function)
CAP
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.- 2D CAD data available
Configure nowStarting from∗ ： 12.70 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 24.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 8.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Keyless Bushing (Fastening Fittings)
OPTIBELT
[Specifications]
・Shaft Bore Dia. d(Ø): 10-120
・Overall Length W(mm): 22.3-127
・Outer Dia. A(φ): 35-178Configure nowMin. Shipping Days ： 4 Days -
Locking Assemblies 7005
RINGFEDER
Clamping set for high loads and suitable for alternating moments. Ideal for use in belt drums and flywheels.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies 7006
RINGFEDER
Universal clamping set for small installation space and axial stop ring. Self-centering and easy to install for medium to high torques.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies 7015.1
RINGFEDER
Locking Assembly for transmission of torques, axial forces and high bending moments at reduced contact pressures, with special requirements to the true running of the clamped pieces. Special features With the long and flat angle of the cones, the required loads can be transferred with one Locking Assembly RfN 7015.1. During mounting Locking Assembly, shaft and hub remain to each other in position. Compared to three-part construction types, thus an additional safety is provided. Shaft and hub are only compression loaded.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies COM-B
MAEDLER
Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 18.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1610
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 7.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 12.35 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Rigid Shaft Coupling
KBK
· Very cost-effective
· For medium and low torques
· No axial displacement during assembly
· Self-centering
· Torque range: 158 - 4300Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.99 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Keyless Bushing, Straight Type
CAP
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.- 2D CAD data available
Configure nowStarting from∗ ： 14.80 € Min. Shipping Days ： 58 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 27.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 3.38 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 9.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CONCAR | CONCAR | MISUMI | KBK | MISUMI | MISUMI | KBK | MISUMI | RINGFEDER | MISUMI | MAEDLER | KBK | MISUMI | ISEL | MIKI PULLEY | SUNGIL | KATAYAMA CHAIN | ISEL | CONCAR | KBK | KBK | ISEL | ISEL | KBK | RINGFEDER | RINGFEDER | OPTIBELT | KBK | ISEL | MIKI PULLEY | CAP | SUNGIL | CONCAR | OPTIBELT | RINGFEDER | RINGFEDER | RINGFEDER | MAEDLER | MAEDLER | MAEDLER | KBK | CAP | SUNGIL | CONCAR | CONCAR |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||
| Starting from∗ | 9.45 € *Unit price with basic configuration | 4.72 € *Unit price with basic configuration | 35.76 € *Unit price with basic configuration Volume Discount | 10.35 € *Unit price with basic configuration | 31.74 € *Unit price with basic configuration Volume Discount | 40.66 € *Unit price with basic configuration Volume Discount | 12.08 € *Unit price with basic configuration | 28.46 € *Unit price with basic configuration Volume Discount | - | 105.79 € *Unit price with basic configuration Volume Discount | 24.10 € *Unit price with basic configuration Volume Discount | 9.33 € *Unit price with basic configuration | 35.14 € *Unit price with basic configuration Volume Discount | 38.74 € *Unit price with basic configuration Volume Discount | 54.73 € *Unit price with basic configuration Volume Discount | 19.79 € *Unit price with basic configuration | 5.27 € *Unit price with basic configuration Volume Discount | 31.33 € *Unit price with basic configuration Volume Discount | 8.18 € *Unit price with basic configuration | 9.90 € *Unit price with basic configuration | 11.77 € *Unit price with basic configuration | 100.92 € *Unit price with basic configuration Volume Discount | 46.53 € *Unit price with basic configuration Volume Discount | 9.90 € *Unit price with basic configuration | - | - | 4.78 € *Unit price with basic configuration | 14.41 € *Unit price with basic configuration | 46.50 € *Unit price with basic configuration | 73.77 € *Unit price with basic configuration Volume Discount | 12.70 € *Unit price with basic configuration | 24.96 € *Unit price with basic configuration Volume Discount | 8.26 € *Unit price with basic configuration | - | - | - | - | 18.43 € *Unit price with basic configuration Volume Discount | 7.91 € *Unit price with basic configuration Volume Discount | 12.35 € *Unit price with basic configuration Volume Discount | 10.99 € *Unit price with basic configuration | 14.80 € *Unit price with basic configuration | 27.26 € *Unit price with basic configuration Volume Discount | 3.38 € *Unit price with basic configuration | 9.08 € *Unit price with basic configuration |
| Min. Shipping Days | 3 Days | 3 Days | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | 4 Days | 12 Days | Same day | Same day | Same day | 5 Days | Same day | Same day | 3 Days | Same day | Same day | 5 Days | Same day | Same day | 5 Days | 5 Days | 5 Days | 12 Days | 5 Days | Same day | 10 Days | 5 Days | 3 Days | 4 Days | 5 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 12 Days | 58 Days | Same day | 3 Days | 3 Days |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Type | - | - | Flanged | Straight | Thin Wall | Nut Tightening | Flanged | Direct Mounting | - | Straight | - | - | Straight | Flanged | Straight | Flanged | Sleeve | Flanged | - | Straight | Straight | Flanged | Nut Tightening | Flanged | - | - | - | - | Thin Wall | Straight | Flanged | Flanged | - | - | - | - | - | - | - | - | - | Straight | Flanged | - | - |
| Centering | - | - | Provided | - | Provided | Not Provided | - | Not Provided | - | Not Provided | Provided | - | Not Provided | Provided | - | Provided | Not Provided | Provided | - | - | - | Provided | Provided | - | - | - | - | - | Provided | - | Provided | Provided | - | - | - | - | - | Provided | - | Provided | - | Not Provided | Provided | - | - |
| Body Material | Grey Iron | Grey Iron | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | - | Steel | - | - | Steel | Steel | Steel | Steel | Steel | Aluminum | Grey Iron | Steel | Steel | Steel | Steel | Steel | - | - | - | - | Steel | Steel | Steel | Steel | Grey Iron | - | - | - | - | - | - | - | - | Steel | Steel | Grey Iron | Grey Iron |
| Shaft Bore Dia. d(Ø) | - | - | 5 ～ 70 | 5 ～ 50 | 5 ～ 50 | 8 ～ 35 | 6 ～ 120 | 5 ～ 30 | - | 30 ～ 65 | - | - | 20 ～ 65 | 5 ～ 70 | 19 ～ 120 | 5 ～ 50 | 10 ～ 80 | 4 ～ 35 | - | 18 ～ 180 | 19 ～ 220 | 35 | 8 ～ 35 | 18 ～ 180 | - | - | 14 ～ 100 | - | 6 ～ 50 | 2 ～ 50 | 15 ～ 70 | 5 ～ 50 | - | 10 ～ 120 | - | - | - | - | - | - | - | 19 ～ 70 | 8 ～ 30 | - | - |
| Allowable Torque Range(N•m) | - | - | 2.0 to 20.0 ～ 3000.1 to 10000.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | - | 2.0 to 20.0 ～ 100.1 to 150.0 | - | 1000.1 to 3000.0 ～ 3000.1 to 10000.0 | - | - | 200.1 to 300.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 3000.1 to 10000.0 | 200.1 to 300.0 ～ 10000.1 to 300000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 200.1 to 300.0 | - | - | - | 700.1 to 1000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | - | - | - | - | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | - | - | - | - | - | - | - | - | 2.0 to 20.0 ～ 500.1 to 700.0 | - | - |
| Surface Treatment | - | - | Not Provided / Black Oxide / Electroless Nickel Plating | - | Not Provided / Electroless Nickel Plating | Not Provided / Black Oxide / Electroless Nickel Plating | - | Not Provided | - | Not Provided | - | - | Not Provided / Electroless Nickel Plating | Not Provided | Not Provided / Electroless Nickel Plating | Not Provided | Not Provided | Clear Anodize | - | - | - | Not Provided | Not Provided | - | - | - | - | - | Not Provided | Not Provided / Electroless Nickel Plating | Not Provided | Electroless Nickel Plating | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided | - | - |
| Hub Dia. D1(Ø) | - | - | 16 ～ 97 | 16 ～ 80 | 12 ～ 65 | 14 ～ 48 | 14 ～ 155 | 8 ～ 35 | - | 55 ～ 95 | - | - | 47 ～ 95 | 16 ～ 97 | 47 ～ 165 | 16 ～ 72 | - | 15 ～ 56 | - | 47 ～ 235 | 47 ～ 285 | 57 | 14 ～ 48 | 47 ～ 235 | - | - | - | - | 12 ～ 65 | 16 ～ 80 | - | 16 ～ 72 | - | - | - | - | - | - | - | - | - | - | 22 ～ 55 | - | - |
| Tightening Structure | - | - | Single Cone Type | Double Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | - | Double Cone Type | - | - | Double Cone Type | Single Cone Type | Double Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | - | Single Cone Type | Double Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | - | - | - | - | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - | - | - | - | - | - | Double Cone Type | Single Cone Type | - | - |
| Tightening Method | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - |
| Allowable Torque(N•m) | - | - | 2.8 ～ 3400 | - | 3 ～ 2120 | 21 ～ 461 | - | 4.2 ～ 149 | - | 1110 ～ 6400 | - | - | 300 ～ 2990 | 7 ～ 3400 | 289 ～ 13500 | 7 ～ 1500 | 6.9 ～ 1860 | 2 ～ 230 | - | - | - | 970 | 29.4 ～ 461 | - | - | - | 5.7 ～ 195 | - | 11 ～ 2120 | 6 ～ 1760 | 0.098 ～ 2.432 | 4.6 ～ 1362 | - | - | - | - | - | - | - | - | - | 240 ～ 4600 | 18 ～ 510 | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Centering
- Provided
- Not Provided
-
Body Material
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.