Levelling Feet (pagina 2)
Selected Product
71 articol(e)
* Informații privind zile de expediere, costurile de expediere și prețurile
- DISCOUNT
- Volume Discount
YUKI LABORATORY
Rubber Feet (Non-Migratory Specifications)
[Applications]· Attach to the frame T-groove for use.Citiți mai mult- CAD:
- 2D
Selected Product - ConfigurarePreț normal (fără TVA):2.44 €～Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
YUKI LABORATORY
Stainless Steel Adjuster, Small
[Features]· The main body is made of stainless steel with excellent corrosion resistance.· The swivel mechanism can accommodate up to an approximately 10° slant in the floor surface.· The dual structure of the main body and the base enables the height to be adjusted by turning manually after it has been installed.· The base is made of anti-slip elastomer.[Applications]· Suitable for clean benches, etc.Citiți mai mult- CAD:
- 2D
Selected Product Leveling Mounts ConfigurarePreț normal (fără TVA):16.04 €Dată de expediere normală:6 zile lucrătoare- ConfigurarePreț normal (fără TVA):11.92 €Dată de expediere normală:6 zile lucrătoare
- Volume Discount
GANTER
Levelling feet without mounting holes, Hygienic Design
GN 20 levelling feet without mounting holes are intended for use in hygiene areas. The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.The high quality finish prevents adherence of dirt and facilitates cleaning.The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):132.30 €～Dată de expediere normală:7 zile lucrătoare
- DISCOUNT
- Volume Discount
GANTER
Levelling Feet / Steel / GN 339 / Diameter 29, 36
Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.For this reason they offer the advantage of reduced height.The gliding and/or the non-gliding protective cap is safely fixed in the foot.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):7.80 €～Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
- Volume Discount
GANTER
Levelling sets with spherical washer, with locknut
Levelling sets GN 350.5 are used for levelling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):69.92 €～Dată de expediere normală:7 zile lucrătoare
- DISCOUNT
- Volume Discount
GANTER
Stainless Steel-Levelling Feet / GN 339
Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.For this reason they offer the advantage of reduced height.The gliding and/or the non-gliding protective cap is safely fixed in the foot.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):13.40 €～Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
- Volume Discount
GANTER
Levelling sets, Steel (GN 360)
GN 360 Levelling sets are used for leveling and to compensate for any slope when setting up machines and systems.The thread d2 can also be used as a through-hole for attachment from below. The fine thread d3 laws precise adjustment and readjustment using a DIN 1810 C-Spanner. A circlip limits the maximum path of adjustment.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):104.12 €～Dată de expediere normală:7 zile lucrătoare
- New Product
TUENKERS
Euro-Gripper-Tooling - Pedestal 80er, SW80-RD30-L90
Pedestal 80er, SW80-RD30-L90Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):66.85 €Dată de expediere normală:5 zile lucrătoare
- New Product
TUENKERS
Euro-Gripper-Tooling - Pedestal 50er, SW50-RD30-L90
Pedestal 50er, SW50-RD30-L90Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):65.49 €Dată de expediere normală:5 zile lucrătoare
- Volume Discount
GANTER
Stainless Steel-Cover sleeves, Hygienic Design
Stainless steel cover sleeves GN 20.1 are certified according to 3-A Sanitary Standards, Inc. guidelines and intended for use in hygienic areas.・These cover protruding male threads while also substituting for lock nuts .The sealed mounting surfaces enable fastening without dead spaces.・The high quality finish prevents adherence of dirt and facilitates cleaning.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):21.42 €～Dată de expediere normală:7 zile lucrătoare
- Volume Discount
NIC AUTOTEC
Structural materials for factory automation equipmentNote: product images are grouped images of accessories.Citiți mai multSelected Product Anchor ConfigurarePreț normal (fără TVA):5.93 €～Dată de expediere normală:6 zile lucrătoare
NIC AUTOTEC
Set of AG Series Anchor Connection Brackets AGBK30A
-AG series safety fence anchor bracket set. Cylindrical bracket (30 mm).Citiți mai multSelected Product Anchor ConfigurarePreț normal (fără TVA):31.67 €Dată de expediere normală:6 zile lucrătoare
- Volume Discount
YUKI LABORATORY
[Applications]· Attach to the frame T-groove for use.Citiți mai mult- CAD:
- 2D
Selected Product - ConfigurarePreț normal (fără TVA):1.32 €～Dată de expediere normală:6 zile lucrătoare
- Volume Discount
YUKI LABORATORY
[Features]· The thin design does not damage the design of the housing.· With a cross socket that's convenient for installation.[Applications]· An adjuster with a compact design.Citiți mai mult- CAD:
- 2D
Selected Product Leveling Mounts ConfigurarePreț normal (fără TVA):2.91 €Dată de expediere normală:6 zile lucrătoare
YUKI LABORATORY
[Features]· Structures can be brought close to each other or installed in corners.Citiți mai mult- CAD:
- 2D
Selected Product Leveling Mounts ConfigurarePreț normal (fără TVA):6.08 €Dată de expediere normală:6 zile lucrătoare
- Volume Discount
- Stock
YUKI LABORATORY
[Features]· An adjuster with excellent cost performance.Citiți mai mult- CAD:
- 2D
Selected Product Leveling Mounts ConfigurarePreț normal (fără TVA):9.47 €Dată de expediere normală:Articol în stoc: 1 zi lucrătoareExpediere în aceeași zi posibilă
NABESEI
NABESEI, Adjuster Pad / Anchor, Anchor Bracket (140S・140 W)Citiți mai mult- CAD:
- 2D
Selected Product Anchor ConfigurarePreț normal (fără TVA):14.58 €Dată de expediere normală:8 zile lucrătoare
- Volume Discount
GANTER
Adjustment plates for bull´s eye levels GN 2277
Adjustment plates GN 2277.1 are used in combination with bull´s eye levels GN 2277, Type A.The mounting bore holes offset by 120° allow the bull‘s eye levels and the mounting plate to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):4.02 €～Dată de expediere normală:7 zile lucrătoare
- Volume Discount
GANTER
Levelling feet with mounting holes, Hygienic Design
GN 20 hygienic leveling feet with mounting holes are certified according to EHEDG guidelines and are therefore ideal for use in hygienic applications.The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.The high quality finish prevents adherence of dirt and facilitates cleaning.The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):166.02 €～Dată de expediere normală:7 zile lucrătoare
- DISCOUNT
- Volume Discount
GANTER
Levelling feet with mounting lug, steel sheet, zinc plated, with and without rubber
Levelling feet GN 42 will be delivered mounted and are not removable.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):5.82 €～Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
- DISCOUNT
- Volume Discount
GANTER
Levelling feet with vibration absorbing, Steel
The specified load in the above table of the levelling feet GN 342.1 is a recommendation up to which the damping element can be permanently subjected.This static load equals a thrust on the area of 0,4 N/mm2, at which the damping material reaches its optimum dynamic damping ability. This also takes into account an additional load up to 0,6 N/mm2 in the event of a dynamic load.Levelling feet GN 342.1 can not be disassembled.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):13.76 €～Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
- DISCOUNT
- Volume Discount
GANTER
GN 349 mounts are used on levelling feet particularly in such cases where a machine shrouding is made of very thin sheet metal.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):11.98 €Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
- Volume Discount
GANTER
Stainless Steel-Levelling feet with fixing lug, rectangular shape (GN 43)
GN 43 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.The levelling feet are supplied fully assembled and are not removable.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):14.58 €～Dată de expediere normală:7 zile lucrătoare
- DISCOUNT
- Volume Discount
GANTER
Stainless Steel-Levelling feet, A4 (GN 44)
GN 44 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The type B0 can also be fastened to the mounting surface through two holes.The levelling feet are supplied fully assembled and are not removable.Citiți mai multSelected Product - ConfigurarePreț normal (fără TVA):6.40 €～Preț normal (fără TVA):Preț specialDată de expediere normală:Articol în stoc: 1 zi lucrătoareUnele articole pot fi expediate în aceeași zi
NORELEM
Levelling feet for aluminium profiles (27840)
· Especially suitable for tables and light installations· Equipment foot height is adjusted by turning the nut by hand or spanner· Compatible with all conventional aluminium profiles with 8 mm or 10 mm slot widthCitiți mai multSelected Product - ConfigurarePreț normal (fără TVA):9.67 €～Dată de expediere normală:4 zile lucrătoare
