Fasteners, Draw Latches（Page 5）

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Hexagonal Wrench Tightening Fastener C-174-SH-4 Key

  TAKIGEN

  Applications: C-174-SH-4/ Overall body length (mm): 25
  · Material: Zinc alloy · Finish: Nickel plating

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Turn Fastener with Stainless Steel Frame C-1264

  TAKIGEN

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.14 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Aluminum Gun Lock II C-591

  TAKIGEN

  [Features]
  · Low cost type of L type guard.
  · Because the lock is built into the bottom of the front guard, it prevents any trouble, such as breakage of the lock part by a drill.
  · Even after installation, the lock can be replaced with 1 screwdriver.
  · With one-touch locking, there is no possibility of forgetting the key.
  · For right side.
  · Japan Vending Machine Industry Association standard locks can be incorporated.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	116.91 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Hexagonal Wrench FC-743

  TAKIGEN

  [Features] Easy to use size, suitable for storage because of coating, "applications", tightening fasteners, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.01 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Snap Lock Standard Type Stainless Steel【4 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  Standard type snap lock. Various sizes are available.
  Choose according to the application.

  Select to compare

  Configure now
  Starting from∗ ：	22.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Snap Lock with Key / Steel Made【2-4 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features] Turn key to the right to lock. Turn to the left to unlock.

  Select to compare

  Configure now
  Starting from∗ ：	25.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Snap Lock with Keyhole, Spring Type / Stainless Steel【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  Snap lock in which padlock can be used. Absorbs vibration by spring action.

  Select to compare

  Configure now
  Starting from∗ ：	25.26 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Snap Lock with Keyhole, Spring Type / Steel Made【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  Snap lock in which padlock can be used. Absorbs vibration by spring action.

  Select to compare

  Configure now
  Starting from∗ ：	13.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Snap Lock with Keyhole / Steel Made【2-4 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features] Lock that can be padlocked. - [Material] Steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.83 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Snap Lock Curved Arm Type / Steel Made【2-4 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features] Metal fittings can be fixed by avoiding protruding parts, etc. of the box. [Material: Steel.

  Select to compare

  Configure now
  Starting from∗ ：	19.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel Snap Lock Type【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features] Parallel type snap lock type. [Material] Stainless steel.

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Snap Lock, Latch Type / Steel Made【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features] Vibration does not disengage latch. [Material] Steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.51 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Snap Lock, Spring Type / Stainless Steel【2-4 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features] Absorption of vibration by spring action. [Material] It is made of stainless steel.

  Select to compare

  Configure now
  Starting from∗ ：	39.68 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Stainless Steel] Toggle Latch EA951BR-5

  ESCO

  -Large size and hold cold for a long time. -For heat stroke prevention measures. -Ingredients: Ammonium nitrate, water

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Stainless Steel] Toggle Latch EA951BR-5B

  ESCO

  【Product Specifications】
  ・Material-SUS304
  ・Finish-Gloss barrel polishing
  ・Hole dia.…5.2mm

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.26 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  D1 DZUS Stud

  SUNCO

  D1 DZUS Bolt "Nominal" NO.40.5 "Material" Synthetic resin, glass reinforced nylon. Type details: straight groove

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.75 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  D1 DZUS Receptacle

  SUNCO

  [Rating] NO.40.1 "Material" Resin, Acetal. Type details: Mini Snap-In, floor mounted.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.49 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel-Toggle latches

  GANTER

  The outstanding features of Stainless Steel-Hook clamps GN 8330 are superior functionality and design. The integrated spring mechanism holds the locking lever and the clamping hook in the open position and allows effortless operation.
  Once the dead center is exceeded, the elasticity of the sheet metal parts will cause the hook clamp to close. In the clamped position, the required drill hole spacing is m2.
  With the stroke w of the clamping hook, the elements to be connected can be pulled together during clamping.
  The hook clamp can be secured against opening inadvertently with the so-called spring cotter pins. The spring cotter pin is placed into the d2 bore hole. Sealing is also possible via d2.
  The retaining force given in the table is a guide value for the potentially static tensile stress load acting on the hook clamp. Depending on the conditions of use (e.g. when exposed to vibrations or shock impact), the retaining force may be impaired.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  LPR - Levers for PR-CH flush pull handles -Steel or stainless steel

  ELESA

  Levers for handles PR-CH zinc-plated or AISI 304 stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  TLG. - Hook clamps -Steel or stainless steel

  ELESA

  Lever latch in zinc-plated steel or in AISI 304 stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  TLI. - Hook clamps -Steel or stainless steel

  ELESA

  Lever latch in zinc-plated steel or in AISI 304 stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.63 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  TLM. - Adjustable hook clamp -Steel or stainless steel

  ELESA

  Simple lever latch, or adjustable and padlockable in zinc-plated steel, or AISI 304 stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  TLV. - Hook clamps -Steel or stainless steel

  ELESA

  Lever latch in zinc-plated steel or in AISI 304 stainless steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.15 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle latches, Steel / Stainless Steel, without lock mechanism

  GANTER

  [Specifications]
  ・Material: Steel, Stainless Steel
  ・Surface treatment: Zinc plated
  ・Size: 100, 200, 300
  ・Type: Latch bolt with loop. with catch, Latch bolt with T-head. with catch
  
  Toggle latches GN 761 / GN 761.1 are especially suited for rapid closing and fastening of covers, container lids and boxes.
  When the lever is closed, the eccentric configuration of the rod shaft causes the latch bolt to move towards the catch. At the end of the lever movement, the rod shaft has exceeded the eccentric dead center point, thereby automatically keeping the toggle latch closed.
  The latch bolts of the toggle latches can be adjusted within the adjustable range w2. The catch is included.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Snap locks plastic with knob (K1653)

  KIPP

  · Easy to operate
  
  · For door leaf thickness 1.2 - 19 mm
  
  · Quick and easy assembly

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Snap locks, plastic with twist knob (K1654)

  KIPP

  · Easy to operate
  
  · Additional security by turning
  
  · For door leaf thickness 1.2 - 19 mm
  
  · Quick and easy assembly

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form A (K0043)

  KIPP

  Material:
  Steel or stainless steel 1.4301
  Version:
  Galvanized and blue chromed.
  Stainless steel bright.
  Note:
  Latches with spring clips for safe holding and locking of hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration.
  The locking force is applied by tensioning a spring clip.
  
  The latches can be screwed down or riveted.
  
  Order catch plates separately.
  
  The retaining force F1 applies to the latch, not the catch plate.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form A (K0044)

  KIPP

  · Vibration proof
  
  · Can be screwed on
  
  · Can be riveted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form A (K0045)

  KIPP

  Material:
  Steel or stainless steel 1.4301
  Version:
  Galvanized and blue chromed.
  Stainless steel bright.
  Note:
  Latches with draw bail for safe holding and locking of hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration.
  The locking force is applied by drawing on the bail.
  
  The hole D2 can be used to secure against unintentional opening or attaching an official lead seal.
  
  The latches can be screwed down or riveted.
  
  Order catch plates separately.
  
  The retaining force F1 applies to the latch, not the catch plate.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form B (K0044)

  KIPP

  · Steel or stainless steel
  
  · Vibration proof
  
  · Can be screwed on
  
  · Can be riveted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches with draw bail, Form B (K0044)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Latches can be screwed on or riveted
  
  · Can be secured or sealed against unintentional loosening

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches with draw bail, Form B (K0045)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Latches can be screwed on or riveted
  
  · Can be secured or sealed against unintentional loosening

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.20 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form B (K0045)

  KIPP

  Material:
  Steel or stainless steel 1.4301
  Version:
  Galvanized and blue chromed.
  Stainless steel bright.
  Note:
  Latches with draw bail for safe holding and locking of hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration.
  The locking force is applied by drawing on the bail.
  
  The hole D2 can be used to secure against unintentional opening or attaching an official lead seal.
  
  The latches can be screwed down or riveted.
  
  Order catch plates separately.
  
  The retaining force F1 applies to the latch, not the catch plate.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes accessible, Form A (K0046)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Every catch plate can be combined with any latch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes accessible, Form B (K0046)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Every catch plate can be combined with any latch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plate, Form A (K0052)

  KIPP

  · Steel or stainless steel
  
  · Can be screwed on
  
  · Vibration proof
  
  · Can be riveted

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plate, Form B (K0052)

  KIPP

  · Steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form A (K0046)

  KIPP

  Material:
  Steel or stainless steel 1.4301
  Version:
  Galvanized and blue chromed.
  Stainless steel bright.
  Note:
  Adjustable latches are safe locking systems for industrial applications. By exceeding the dead centre they resist vibration.
  
  After the hook is engaged with the catch plate, by pushing the lever down the parts to be locked can be drawn together by up to 5 mm.
  To compensate for tolerances or to create enough tension, the hook length can be adjusted using the M5 threaded spindle.
  
  The latches can be screwed down riveted.
  
  Any catch plate can be combined with any latch.
  
  Order required catch plate version separately.
  
  The retaining force F1 applies to the latch, not the catch plate.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form B (K0046)

  KIPP

  Material:
  Steel or stainless steel 1.4301
  Version:
  Galvanized and blue chromed.
  Stainless steel bright.
  Note:
  Adjustable latches are safe locking systems for industrial applications. By exceeding the dead centre they resist vibration.
  
  After the hook is engaged with the catch plate, by pushing the lever down the parts to be locked can be drawn together by up to 5 mm.
  To compensate for tolerances or to create enough tension, the hook length can be adjusted using the M5 threaded spindle.
  
  The latches can be screwed down riveted.
  
  Any catch plate can be combined with any latch.
  
  Order required catch plate version separately.
  
  The retaining force F1 applies to the latch, not the catch plate.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Catch plates, Form C (K0046)

  KIPP

  Material:
  Steel or stainless steel 1.4301
  Version:
  Galvanized and blue chromed.
  Stainless steel bright.
  Note:
  Adjustable latches are safe locking systems for industrial applications. By exceeding the dead centre they resist vibration.
  
  After the hook is engaged with the catch plate, by pushing the lever down the parts to be locked can be drawn together by up to 5 mm.
  To compensate for tolerances or to create enough tension, the hook length can be adjusted using the M5 threaded spindle.
  
  The latches can be screwed down riveted.
  
  Any catch plate can be combined with any latch.
  
  Order required catch plate version separately.
  
  The retaining force F1 applies to the latch, not the catch plate.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes covered, Form A (K0047)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Every catch plate can be combined with any latch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes covered, Form B (K0047)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Every catch plate can be combined with any latch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes covered, Form C (K0047)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Every catch plate can be combined with any latch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes accessible, Form A (K0048)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Low construction height

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latches adjustable, fastening holes accessible, Form B (K0048)

  KIPP

  · Simple locking mechanism for covers, claddings and containers
  
  · Application sectors: machine and plant construction, container construction
  
  · Vibration-proof through exceeding dead centre point
  
  · Adjustable hook clamps
  
  · Low construction height

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.94 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...