Clamping Knobs（Page 3）

?* Information on days to ship and prices

• • Promotional pricing

  

  Hand knobs, Stainless Steel

  GANTER

  Hand knobs, Stainless Steel

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Knurled screws with recessed stud for loss prevention

  GANTER

  Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs with loss protection

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs with stainless steel insert

  GANTER

  Star knobs with stainless steel insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Star knobs, Aluminum

  GANTER

  Star knobs GN 5336 are forged, therefore a close grain structure is maintained providing a high tensile strength and a smooth surface.
  Original ELESA design, now produced in metal in agreement with ELESA s.p.a.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Tommy screws, with movable bar

  GANTER

  The thrust point of these screws DIN 6306 is designed to be used with or without the thrust pad for clamping.
  The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
  Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
  The movable bar of the tommy screw DIN 6306 is held in any position by the pressure spring.
  The end caps are pressed on to the bar and thus limit the bar travel, they can also be supplied separately should the bar be plated first.The official DIN standard sheets provides for steel rings at this point.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  CWN. - Wing nuts -Technopolymer

  ELESA

  Glass-fibre reinforced polyamide based (PA) technopolymer wing nut.
  The slightly convex marks on the wings offer a point where the fingers can be positioned.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  EWNM-SST - Wing nuts -Stainless steel

  ELESA

  AISI 304 stainless steel wing nut, sandblasted matte finish.
  The slightly concave marks on the wings help to position the fingers in order to apply the maximum force when tightening.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  VCRT. - Shortened lobe knobs -Technopolymer square or threaded hole

  ELESA

  Shortened five-lobe knob with square through hole with brass reinforcement or brass boss.
  Glass-fibre reinforced polyamide based technopolymer.
  On request, polypropylene-based technopolymer CA.VCT boss cap, in Elecolors colours, press-fit assembly.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.18 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  VCT-LP - Lobe knobs -with retaining chain technopolymer

  ELESA

  Five-lobe knobs with retaining chain.
  Polypropylene based technopolymer.
  Ball cable and coupling heads in acetal resin based technopolymer
  NERINOX treated stainless steel ring with two coils.
  The elastic fork, housed in the groove of the knob can turn freely.
  Suitable where it is necessary to prevent the loss of the knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Knurled torque knobs external thread (K0277)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · The setscrew sets the torque

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Wing screws for Hygienic USIT sealing and shim washer Freudenberg Process Seals (K1313)

  KIPP

  · Particularly suitable for the hygienic sector
  
  · Ideal for simple screw connections
  
  · High-gloss polished surface (Ra 0.8 µm) ensures easy cleaning
  
  · Cavity-free sealing of the fastening point
  
  · Material: stainless steel 1.4404, very good corrosion resistance

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Star Grips, Similar to DIN 6336, Stainless steel A4

  HALDER

  Material

  Handle

  • Stainless steel 1.4408, precision casting, polished
  

  Select to compare

  Configure now
  Starting from∗ ：	16.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Knurled knobs with internal thread (06092)

  NORELEM

  · Suitable for manual positioning and clamping
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · Advantage: knurled nut is tightened and loosened with tools
  
  · 7 colour variants

  Select to compare

  Configure now
  Starting from∗ ：	1.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Star grips similar to DIN 6336, internal thread without cap, Form D (06220)

  NORELEM

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form D: tapped bush without cap
  
  · Cap in various colour combinations

  Select to compare

  Configure now
  Starting from∗ ：	0.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Torque Limiting Knobs / GN 3663

  GANTER

  Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.
  When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
  After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	58.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Waist shaped Stainless Steel-Knobs, Hygienic Design (GN 75.6)

  GANTER

  GN 75.6 waist shaped Stainless Steel-Knobs are intended for use in hygiene areas. The sealed mounting surface enables mounting without dead spaces; the impervious geometry in combination with the high quality finish prevents the accumulation of dirt and facilitates cleaning.
  
  GN 75.6 waist shaped Stainless Steel-Knobs have a compact and timeless design.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Plastic Clamp Knobs

  MISUMI

  [Features] A round plastic clamping knob. -The side surface is knurled.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Knob Bolt Black

  MITSUBOSHI CI

  It is a glossy surface product in which you can insert a molded bolt, or a specially processed reinforced plastic nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Cruciform Knurled Knob A-1176-SP

  TAKIGEN

  You can tighten it with a Phillips screwdriver. Made from stainless steel for superior corrosion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel Foot Length Knurled Knob A-1176

  TAKIGEN

  Ideal for use in distribution boards, control boards, vending machines.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Tomy Screw DIN6306, With Movable Lever

  HALDER

  [Features]
  · Bar is movable; stopped by spring pressure.
  [Applications]
  · Tomy screw that matches the thrust pad DIN6311 shape S, EH22560.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Phenolic Resin Knob, Female Thread EA948B-11

  ESCO

  [Features] Knob/knob, screw knob (phenolic resin).

  Select to compare

  Configure now
  Starting from∗ ：	5.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Control knobs with adjustable spindle, Aluminium / Steel

  GANTER

  Control knobs with adjustable spindle GN 727 allow precise adjustment or aligning i. e. of a positive stop. The spindle thread is without backlash.
  The graduations on the control knob are non-abrasive and well legible,
  The light grey cover shrouds the fixing components as well as the shaft end.
  Regarding design, numbering run, numbering position and mubering sequence of the scale please see the layout for scale rings on the order sheet "How to order Graduations".

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	90.80 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat knurled screws, Steel

  GANTER

  All flat knurled screws DIN 653 are produced from one piece and threaded over ist full length.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Plastic, protruding steel bushing, threaded bolt

  GANTER

  The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand knobs, Technopolymer, with protruding Stainless Steel bushing

  GANTER

  Hand knobs GN 6335.2 with protruding Stainless Steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Knurled screws with recessed stud for loss prevention

  GANTER

  Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Flat knurled screws with brass / plastic pivot

  GANTER

  Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
  The head dimensions comply with flat knurled thumb screws DIN 653.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Knurled screws

  GANTER

  The knurling of the Stainless Steel-Knurled screws GN 535 allows a use in an environment with hygienic requirements.
  Specification

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Star knobs, Stainless Steel

  GANTER

  Star knobs, Stainless Steel

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Waist shaped Stainless Steel-Knobs

  GANTER

  Waist shaped knobs GN 75.5 boast a compact and timeless design.
  They are made of high-grade stainless steel which makes them the first choice when it comes to applications requiring high standards of hygiene. The favourably designed and non-scooped geomtery helps to prevent damp and the related risk of dirt collecting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  BT-ESD - Fluted grip knobs -ESD conductive technopolymer

  ELESA

  Fluted grip knob in ESD-C (Electrostatic Discharge Conductive) glass-fibre reinforced polyamide-based technopolymer.
  BT-ESD knob is suitable for ESD PROTECTED AREA (EPA) where components which are susceptible to electrostatic discharges are to be handled with the minimum risk of damage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  ELK. - Knobs with rear lobes -Technopolymer

  ELESA

  Knob with rear lobes.
  Glass-fibre reinforced polyamide based technopolymer, grey-black colour.
  Technopolymer cover in Ergostyle colours, ultrasonically welded to the body of the knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  VC.192 - Lobe knobs -Duroplast easy cleaning

  ELESA

  Duroplast Five-lobe knobs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  VCT.SOFT - Lobe knobs -Soft-touch technopolymer

  ELESA

  Five-lobe knobs.
  High-resilience polypropylene based (PP) technopolymer, coated with thermoplastic elastomer "soft-touch" chemically bonded, hardness 70 Shore A.
  Coloured caps for customisation and aesthetics.
  Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  VL.140+I - Control handwheels -with revolving handle Duroplast

  ELESA

  Control handwheel with revolving handle phenolic based duroplast, black colour, black-oxide steel hub with pre-drilled blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  VTT - Knobs with solid section -Technopolymer easy cleaning

  ELESA

  Three-lobe knob with solid section.
  Glass-fibre reinforced polyamide based technopolymer.
  The three-lobe shape with large recesses is particularly ergonomic also for smaller knobs, ensuring an effective grip even with work gloves.
  The design without rear cavities, generally adopted for reducing thickness, prevents unhealthy residues from depositing, ensuring easy cleaning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Wing grips "Miniwing" with internal thread (K0274)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · Finger-specific ergonomics

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Palm grips, plastic with protruding steel bush, Form L with external thread (K1794)

  KIPP

  · Closed grip contour
  
  · Easy to clean
  
  · For stringent hygiene requirements.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Knurled knobs, Form L, with external thread (06097)

  NORELEM

  · Suitable for manual positioning and clamping
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · Advantage: knurled nut is tightened and loosened with tools
  
  · Form L: external thread (steel)
  
  · Different thread sizes

  Select to compare

  Configure now
  Starting from∗ ：	1.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Knurled knobs Form C, with standard scale (06100)

  NORELEM

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form C: optimum readability due to incorporated scale marking

  Select to compare

  Configure now
  Starting from∗ ：	8.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Palm grips, similar to DIN 6335, Form L with external thread (06180)

  NORELEM

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form L: with external thread
  
  · Different thread sizes

  Select to compare

  Configure now
  Starting from∗ ：	0.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Star grips similar to DIN 6336 with external thread, Form L (06208)

  NORELEM

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form L: steel external thread
  
  · Different thread sizes

  Select to compare

  Configure now
  Starting from∗ ：	0.92 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel Knobs / Wingnut Type

  MISUMI

  [Features] A stainless steel T-shaped wing knob. -The type of fastener is a female thread.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...