Other Hinges and Hinge Accessory

152

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

Multi-pivot hinges / 2-axis / 120°, 200° / stainless steel / FB-1729N / TAKIGEN

TAKIGEN

Made from stainless steel for superior corrosion resistance. Tighten the door horizontally up to 5 mm with a two-axis mechanism.
Use resin parts for shaft parts to suppress generation of particles. Remove the included stopper, to change the rotation angle.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	116.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER

GANTER

With the exception of the connector plug, hinges without safety switch GN 139.2 do not differ in their external appearance from hinges with safety switch GN 139.1. With the concealed screw connection at the back, the hinge is also tamper-proof.
The compact design combines safety and attractive appearance.
The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	43.20 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Multi-pivot hinges / cylinder countersinks / 2-axis / 104°, 194°, 210° / stainless steel / FB-1736 / TAKIGEN

TAKIGEN

[Features]
· The door can be tightened horizontally up to about 10 mm by a 2-axis mechanism (tightening mechanism is required).
· Dry bearing (phosphor bronze) is used for the bearing part.
· Fine adjustment of door gasket and tightening O-ring is possible with adjustment screw.
· Made of stainless steel, corrosion resistant

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	112.84 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flap hatch hinges / rolled / stainless steel / barrel polished / B-1057-5 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN

TAKIGEN

Can use any, including flat, corner, back hinge, etc.

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hatch hinges / conical countersinks / zinc die-cast / chrome-plated / FB-930 / TAKIGEN

TAKIGEN

[Features]
· Ideal for flat type.
· Left and right combination

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	36.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Block hinges with fastening nuts, long version (K1143)

KIPP

· Connect two fixed components flexibly to each other

· Application sectors: machine construction, furniture construction, doors, hatches, hoods

· Universal left and right application

· For overlying or inlying doors

· Fastening material included

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN

TAKIGEN

[Features]
· Unlike the stay type, it does not take up space.
· Click on the stainless steel ball at 90° intervals.
· Easy to install on surface type.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	23.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-4 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Step hinges / rolled / stainless steel / mirror polished / B-1028 / TAKIGEN

TAKIGEN

Suitable for enclosures with steps.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Pivot Hinge PH (Flat) Type/PAW (Frame) Type/PAS (Front Surface) Type

SOWA

[Material] Brass casting (White bronze plating)
[door dimensions] W450 × H700 mm or less
[door weight] PH-50, 60 2.6 kg or less PH-80,95 4 kg or less
Use the left suspension base for the upper right and the right suspension base for the upper left. Please provide 1 right and 1 left for each door.
Mounting screws included

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.18 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Promotional pricing

Hinge Nut for HHS/HHSK

MISUMI

[Features] Nut for flat hinges in stainless steel (HHS/HHSK).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.78 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Corner hinges / conical countersinks / zinc die-cast / FB-613 / TAKIGEN

TAKIGEN

[Features] Ambidextrous type. [Features] for kitchen appliances, medical equipment, etc.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless-Steel Horizontal-Hanging Glass Hinge Series

999SHIMANO

■ Flat hinge portion: SUS304/HL
■ Absolutely no hole boring or other glass machining required.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.89 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Glass Hinge 5500-30-2 Type/3 Type/4 Type/5 Type

Glass Hinge 5500-30-2 Type/3 Type/4 Type/5 Type【2 Pieces Per Package】

SOWA

■ Uses press method so holes do not need to be formed in the glass
Material: Brass finish: chrome

Glass thicknesses For 4 to 8 mm
[5500-30-2 type glass hinge] Applicable door size: width 450 mm height 1300 mm or less, load capacity: 11 kg, weight: 315 g
[5500-30-3 type glass hinge] Applicable door size: width 400 mm height 600 mm or less, load capacity: 5 kg, weight: 135 g
For glass thicknesses 4 to 6 mm
[5500-30-4 type glass hinge] Applicable door size: width 300 mm height 400 mm or less load capacity: 3 kg, weight: 75g
[5500-30-5 type glass hinge] Applicable door size: width 200 mm height 300 mm or less load capacity: 2 kg, weight: 55 g

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	109.71 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Double Acting Spring Hinge For Glass Door (Wall Installation Type) (For Tempered Glass) 787B Type/789B Type

SOWA

Internal components are made of stainless steel (SUS304) and so can be used for shower booths or bathrooms.
Not provided with function of adjusting 0° with the door shut after installation. Move forward with work adjusting the angle of the mounting surface and the glass door.
As this is for a shower booth, do not use it for commercial applications where it will be opened and closed frequently throughout the day (such as between stores).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	247.06 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

Catch plate for latch, with bracket, form B, steel or stainless steel (05531)

NORELEM

· Vibration proof

· Can be screwed on

· Can be riveted

Select to compare

Configure now
Starting from^∗ ：	0.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Hinge Nuts

MISUMI

[Features] Inexpensive nut when used in combination with aluminium hinges, etc.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lifting and lowering corner hinges / through holes, slotted holes / aluminium / FB-743 / TAKIGEN

TAKIGEN

[Product Information]
· <Common items>
· Body type: Special type
· Length L (mm): 158
· Material: Aluminum alloy
· Surface finish: Baked coating

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	31.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-3 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

Volume Discount

Stock

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1117 / TAKIGEN

TAKIGEN

[Features]
· It is made of all stainless steel and has excellent corrosion resistance

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	16.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-pivot hinges / tapered holes / 2-axis / rolled / 90°, 180° / stainless steel / barrel polished / B-1013 / TAKIGEN

TAKIGEN

[Product Information]
· <Common items>
· Body type: Special type
· Length L (mm): 40
· Surface finish: Barrel polishing
· Width W (mm): 70
· Plate thickness t (mm): 4

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Door wing hinges / conical countersinks / demountable / 180°, 270° / steel / zinc chromated / B-810 / TAKIGEN

TAKIGEN

[Features]
· Ideal for small and medium size doors.
· Left and right combination type (pin rearrangement).
· 180° opening (B-1810-1, B-810-1).
· 270° opening (B-1810-2, B-810-2)

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flex hinges / with door leaf profile / aluminium, PU / Alumite / B-868-3 / 4 / TAKIGEN

TAKIGEN

[Features]
· Waterproof feature improved because there is no break in the hinge.
· Especially in swing-up door (flip-up type) it is most effective as rainwater, etc. does not flow in even when open.
· Length of the hinge can be arbitrarily cut.
· It is open at 80° in free state.
· There is no protrusion at the door, and the appearance is improved.
· 180° opening (ideal for side door, swing-up door)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	263.63 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Face pivot hinges / cable entry / polyacetal / BP-120 / TAKIGEN

Face pivot hinges / cable entry / polyacetal / BP-120 / TAKIGEN【2 Pieces Per Package】

TAKIGEN

[Features]
· Through holes in the hinge are bright, so it can be used as an electrified hinge by passing a cord through it

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Flap hatch hinges / rolled / stainless steel / bright / PY703 / HILOGIK

Flap hatch hinges / rolled / stainless steel / bright / PY703 / HILOGIK【2 Pieces Per Package】

HILOGIK

[Product Information]
· <Common items>
· Body type: Pivot type
· Usage environment: Standard
· Additional functions: None
· Mounting method: Screw lock
· Mounting screw hole type: countersink
· Quantity: 1 pair (2 sheets) / Header dimensions (mm): W75 × H120 × D27
· Length D (mm): 18

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.60 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GH-456N Type <No Catch>/ GH-456C Type <With Catch> (For 6 mm Cover Door)

GH-456N Type / GH-456C Type (For 6 mm Cover Door)

SOWA

For glass thicknesses 5 to 8 mm
Applicable glass size width 600 mm, 15 kg or less
[Material] Made of brass (BRASS)
[Finish] SN (satin nickel) CR (chrome plating) GC (gold plating)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	97.03 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Glass Hinge 5500-30-7 Type/5500-30-0 Type

Glass Hinge 5500-30-7 Type/5500-30-0 Type【4 Pieces Per Package】

SOWA

■ Uses press method so holes do not need to be formed in the glass
Material: Brass, finish: chrome

[5500-30-7 type]
For glass thicknesses 4 to 6 mm, applicable door size: width 300 mm, height 400 mm or less, load capacity: 5 kg, weight: 215g
[5500-30-0 type]
For glass thicknesses 4 to 8 mm, applicable door size: width 400 mm height 800 mm or less, load capacity: 5 kg, weight: 430 g
　

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	305.38 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Glass Hinge TTS-5041/TTS-5042

Glass Hinge TTS-5041/TTS-5042【2 Pieces Per Package】

SOWA

Brass glass hinge. The surface treatment is chrome plating. Material and finish details: brass and chrome

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	231.68 €
Min. Shipping Days ：	16 Days

*Unit price with basic configuration

Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER

GANTER

With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish appearance is important.
The concealed and tamper-proof mounting from the rear highlights and enhances the special appearance of the hinge.
The dimensions l1 / l2 and the drill hole spacings m1 / m2 match the usual hinges GN 237 / GN 237.1 and can replace these.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	9.04 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pins stainless steel for hinge halves (27869)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	3.89 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Catch plate for latch, with bracket, form C, steel or stainless steel (05536)

NORELEM

· Steel or stainless steel

· Vibration proof

· Can be screwed on

· Can be riveted

Select to compare

Configure now
Starting from^∗ ：	1.01 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Multi-link spring hinges / conical countersinks / 2-axis / rolled, double-acting / steel / stove-enamelled / VF-111 / WAKISANGYO

Multi-link spring hinges / conical countersinks / 2-axis / rolled, double-acting / steel / stove-enamelled / VF-111 / WAKISANGYO【2 Pieces Per Package】

WAKISANGYO

For swing-type wooden door

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.33 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hinge pins / steel / B-980 / TAKIGEN

TAKIGEN

[Same size also available in stainless steel. See B-1980

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hinge pins / steel / B-98 / TAKIGEN

TAKIGEN

[Features] Same size also available in stainless steel. See B-1098.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hinge pins / steel / B-970 / TAKIGEN

TAKIGEN

[Same size also available in stainless steel. See B-1970

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.26 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Hinge pins / steel / B-97 / TAKIGEN

TAKIGEN

[Same size also available in stainless steel. See B-1097.

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.55 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lifting and lowering hinges / slotted holes / 60°, 180° / zinc die-cast / chrome-plated / FB-612 / TAKIGEN

TAKIGEN

Automatically closes the door when it is opened 120° or less.

[Features]
· Built-in cam that raises when opening the door (FB-612).
· Automatically closes the door when it is opened 120° or less.
· Horizontal rotation (FB-612).
· No rising (FB-612-NLH).
· Left and right combination

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	86.93 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Flat spring glass tilting hinges / < 15° / spring steel / zinc chromated / B-892 / TAKIGEN

TAKIGEN

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Corner hinges / conical countersinks, slotted holes / zinc die-cast / FB-610 / TAKIGEN

TAKIGEN

[Features] Ambidextrous. [Features] Kitchen appliances and medical equipment.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Corner hinges, plug-in / slotted holes / zinc / chrome-plated / FB-611 / TAKIGEN

TAKIGEN

[Features]
· Once the door opens the built-in cam automatically raises.
· Automatically closes the door when it is opened 120° or less.
· Horizontal rotation beyond that (FB-611· FB-611-H).
· Open door within 60° automatically closes, holds door open at 90°.
· (FB-611-S).
· The door automatically returns to 90° position from open door position between 90° and 120°.
· (FB-611-S).
· Theft prevention function that cannot be withdrawn when closed (FB-611-H, FB-611-S).
· Left and right combination

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	47.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Lifting and lowering corner hinges / tapered counterbores, slotted holes / zinc die-cast / chrome-plated / FB-655 / TAKIGEN

TAKIGEN

[Features]
· Conventional products FB-611 with renewed design and lower cost.
· Automatically closes the door when it is opened 120° or less.
· Horizontal rotation from there on.
· When disconnecting and closing the door, the crime prevention structure means that one cannot remove the mounting screw on the door.
· Easy rearrangement of left and right with a flathead screwdriver.
· Resin cam makes it difficult for metallic powder and noise generation during operation.
· Conventional products FB-611 are compatible with installation.
· Left and right combination

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.11 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Corner hinges, plug-in / conical recesses / zinc / chrome-plated / FB-717 / TAKIGEN

TAKIGEN

[Features]
· Easy to use, solid feel general purpose type.
· Durable and tough structure.
· Operation is very smooth by inserting nylon washer.
· Left and right combination

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	31.95 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hinge pins / stainless steel / B-1980 / TAKIGEN

TAKIGEN

[Features] Precision trunnions manufactured by Takigen. -Can be used for power distribution cabinets, control cabinets, etc.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	10.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hinge pins / stainless steel / B-1098 / TAKIGEN

TAKIGEN

[Product Information]
· <Common items>
· Body type: Special type
· Surface finish: Fabric

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Length L *Figure in () is the min length of the adjustable type.(mm)
Operating Environment
Main Body Material
Main Body Surface Treatment
Width W(mm)
Additional Function
Left/Right Side
Mounting Method
Mounting Screw Hole Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare
Brand	TAKIGEN	GANTER	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	KIPP	TAKIGEN	TAKIGEN	TAKIGEN	SOWA	MISUMI	TAKIGEN	999SHIMANO	SOWA	SOWA	NORELEM	MISUMI	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	HILOGIK	SOWA	SOWA	SOWA	GANTER	NORELEM	NORELEM	WAKISANGYO	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN
Product Series	Multi-pivot hinges / 2-axis / 120°, 200° / stainless steel / FB-1729N / TAKIGEN	Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER	Multi-pivot hinges / cylinder countersinks / 2-axis / 104°, 194°, 210° / stainless steel / FB-1736 / TAKIGEN	Flap hatch hinges / rolled / stainless steel / barrel polished / B-1057-5 / TAKIGEN	Corner hinges / internal thread / zinc die-cast / FB-735 / TAKIGEN	Hatch hinges / conical countersinks / zinc die-cast / chrome-plated / FB-930 / TAKIGEN	Block hinges with fastening nuts, long version (K1143)	Corner hinges / conical countersinks / 180° (90° detent) / zinc die-cast / B-845 / TAKIGEN	Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-4 / TAKIGEN	Step hinges / rolled / stainless steel / mirror polished / B-1028 / TAKIGEN	Pivot Hinge PH (Flat) Type/PAW (Frame) Type/PAS (Front Surface) Type	Hinge Nut for HHS/HHSK	Corner hinges / conical countersinks / zinc die-cast / FB-613 / TAKIGEN	Stainless-Steel Horizontal-Hanging Glass Hinge Series	Glass Hinge 5500-30-2 Type/3 Type/4 Type/5 Type【2 Pieces Per Package】	Double Acting Spring Hinge For Glass Door (Wall Installation Type) (For Tempered Glass) 787B Type/789B Type	Catch plate for latch, with bracket, form B, steel or stainless steel (05531)	Hinge Nuts	Lifting and lowering corner hinges / through holes, slotted holes / aluminium / FB-743 / TAKIGEN	Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1057-3 / TAKIGEN	Flap hatch hinges / conical countersinks / rolled / stainless steel / barrel polished / B-1117 / TAKIGEN	Multi-pivot hinges / tapered holes / 2-axis / rolled / 90°, 180° / stainless steel / barrel polished / B-1013 / TAKIGEN	Door wing hinges / conical countersinks / demountable / 180°, 270° / steel / zinc chromated / B-810 / TAKIGEN	Flex hinges / with door leaf profile / aluminium, PU / Alumite / B-868-3 / 4 / TAKIGEN	Face pivot hinges / cable entry / polyacetal / BP-120 / TAKIGEN【2 Pieces Per Package】	Flap hatch hinges / rolled / stainless steel / bright / PY703 / HILOGIK【2 Pieces Per Package】	GH-456N Type / GH-456C Type (For 6 mm Cover Door)	Glass Hinge 5500-30-7 Type/5500-30-0 Type【4 Pieces Per Package】	Glass Hinge TTS-5041/TTS-5042【2 Pieces Per Package】	Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER	Pins stainless steel for hinge halves (27869)	Catch plate for latch, with bracket, form C, steel or stainless steel (05536)	Multi-link spring hinges / conical countersinks / 2-axis / rolled, double-acting / steel / stove-enamelled / VF-111 / WAKISANGYO【2 Pieces Per Package】	Hinge pins / steel / B-980 / TAKIGEN	Hinge pins / steel / B-98 / TAKIGEN	Hinge pins / steel / B-970 / TAKIGEN	Hinge pins / steel / B-97 / TAKIGEN	Lifting and lowering hinges / slotted holes / 60°, 180° / zinc die-cast / chrome-plated / FB-612 / TAKIGEN	Flat spring glass tilting hinges / < 15° / spring steel / zinc chromated / B-892 / TAKIGEN	Corner hinges / conical countersinks, slotted holes / zinc die-cast / FB-610 / TAKIGEN	Corner hinges, plug-in / slotted holes / zinc / chrome-plated / FB-611 / TAKIGEN	Lifting and lowering corner hinges / tapered counterbores, slotted holes / zinc die-cast / chrome-plated / FB-655 / TAKIGEN	Corner hinges, plug-in / conical recesses / zinc / chrome-plated / FB-717 / TAKIGEN	Hinge pins / stainless steel / B-1980 / TAKIGEN	Hinge pins / stainless steel / B-1098 / TAKIGEN
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	3D	2D / 3D		2D / 3D	2D					2D / 3D	2D / 3D	3D	2D / 3D	2D	2D / 3D	2D / 3D	3D					2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	116.61 € *Unit price with basic configuration Volume Discount	43.20 € *Unit price with basic configuration Volume Discount	112.84 € *Unit price with basic configuration Volume Discount	6.86 € *Unit price with basic configuration Volume Discount	13.89 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	36.26 € *Unit price with basic configuration	11.67 € *Unit price with basic configuration	23.04 € *Unit price with basic configuration Volume Discount	4.98 € *Unit price with basic configuration Volume Discount	6.61 € *Unit price with basic configuration	95.18 € *Unit price with basic configuration Volume Discount	2.78 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.80 € Special price *Unit price with basic configuration Promotional pricing	27.89 € *Unit price with basic configuration Volume Discount	109.71 € *Unit price with basic configuration Volume Discount	247.06 € *Unit price with basic configuration Volume Discount	0.26 € *Unit price with basic configuration	2.77 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.19 € *Unit price with basic configuration Volume Discount	7.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	16.95 € *Unit price with basic configuration	14.10 € *Unit price with basic configuration	25.40 € *Unit price with basic configuration Volume Discount	263.63 € *Unit price with basic configuration	3.24 € *Unit price with basic configuration	5.60 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	97.03 € *Unit price with basic configuration Volume Discount	305.38 € *Unit price with basic configuration Volume Discount	231.68 € *Unit price with basic configuration Volume Discount	9.04 € *Unit price with basic configuration Volume Discount	3.89 € *Unit price with basic configuration	1.01 € *Unit price with basic configuration	14.33 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.28 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.37 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	5.26 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	86.93 € *Unit price with basic configuration Volume Discount	7.58 € *Unit price with basic configuration Volume Discount	19.46 € Special price *Unit price with basic configuration Promotional pricing	47.85 € *Unit price with basic configuration Volume Discount	37.11 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.95 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	10.33 € *Unit price with basic configuration	7.44 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	7 Days	Same day	6 Days	Same day	6 Days	4 Days	Same day	6 Days	6 Days	10 Days	Same day	Same day	8 Days	10 Days	16 Days	4 Days	Same day	6 Days	Same day	6 Days	6 Days	6 Days	14 Days	6 Days	Same day	11 Days	10 Days	16 Days	7 Days	4 Days	4 Days	Same day	Same day	Same day	Same day	Same day	6 Days	6 Days	Same day	6 Days	Same day	Same day	6 Days	6 Days
Specifications					Stock													Order quantities extended (D-JIT)		Stock																	Stock
Type	Special Shape	-	Special Shape	Pivot Type	Special Shape	Special Shape	-	Special Shape	Pivot Type	Special Shape	Pivot Type	Related Components	Special Shape	Glass Hinges	Glass Hinges	Glass Hinges	-	Related Components	Special Shape	Pivot Type	Pivot Type	Special Shape	Special Shape	Special Shape	Pivot Type	Pivot Type	Glass Hinges	Glass Hinges	Glass Hinges	-	-	-	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape	Special Shape
Length L *Figure in () is the min length of the adjustable type.(mm)	75 ～ 124	101	138 ～ 200	70	40 ～ 70	96	-	75	61	60	50 ～ 95	-	100 ～ 127	-	19 ～ 32	77 ～ 90	-	-	158	40.5	75	40	150	2500	36	-	45	33 ～ 56	40 ～ 50	42 ～ 62	-	-	76	70 ～ 106	60 ～ 106	75 ～ 102	-	183	32	104	140 ～ 162	162	125	70 ～ 106	60 ～ 106
Operating Environment	-	-	Standard / Corrosion Resistance	-	-	-	-	-	-	-	Standard	-	-	-	Standard	Standard / Corrosion Resistance	-	-	-	-	-	-	-	-	-	Standard	Standard	Standard	Standard	-	-	-	Standard	-	-	-	-	Standard	-	-	-	-	-	-	-
Main Body Material	-	-	-	Stainless Steel	Zinc Alloy	Zinc Alloy	Stainless Steel / Steel	Zinc Alloy	-	Stainless Steel	Brass	Stainless Steel	Zinc Alloy	Stainless Steel	Brass	Brass	-	-	Aluminum	-	-	-	-	Aluminum	Resin	Stainless Steel	Brass	Brass	Brass	Zinc Alloy	-	-	Steel	-	-	-	-	Zinc Alloy	Steel	Zinc Alloy	Zinc Alloy	Zinc Alloy	Zinc Alloy	-	-
Main Body Surface Treatment	Mirror Surface	-	Mirror Surface	Tumble Polish	Chrome Plating	Chrome Plating	-	Chrome Plating	Tumble Polish	Mirror Surface	-	-	Chrome Plating	Buffed Surface / Brushed	Chrome Plating	Chrome Plating	-	-	Coating	Tumble Polish	Tumble Polish	Tumble Polish	Colored Chromate	Clear Anodize	Not Provided	-	Chrome Plating / Gold Plating / Satin	Chrome Plating	Chrome Plating	-	-	-	Coating	Not Provided	Not Provided	Not Provided	Not Provided	Chrome Plating	Colored Chromate	Chrome Plating	Chrome Plating	Chrome Plating	Chrome Plating	Not Provided	Not Provided
Width W(mm)	48 ～ 82	49 ～ 79	88 ～ 168	18	19 ～ 33.5	116	40 ～ 51	20	11.5	40	13 ～ 80	-	17.5	-	17 ～ 60	65 ～ 71	-	-	-	18	12	70	87	24	6	-	45	25	60 ～ 100	40 ～ 60	-	-	45	12 ～ 18	12 ～ 18	12 ～ 18	-	67	68	22	26 ～ 28.5	29	25	12 ～ 16	12 ～ 18
Additional Function	-	-	Not Provided	-	-	-	-	-	-	-	Not Provided	-	-	-	Not Provided	Not Provided	-	-	-	-	-	-	-	-	-	Not Provided	Not Provided / With Catches	Not Provided	Not Provided	-	-	-	Spring Built-in	-	-	-	-	-	-	-	-	-	-	-	-
Left/Right Side	-	-	-	-	-	-	-	-	-	-	For Both Right and Left Sides	-	-	-	For Both Right and Left Sides	For Both Right and Left Sides	-	-	For Right Side	-	-	-	-	-	-	-	For Both Right and Left Sides	For Both Right and Left Sides	For Both Right and Left Sides	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Method	-	-	-	-	-	-	-	-	-	-	Screw Mounting	-	-	-	Others	Screw Mounting	-	-	-	-	-	-	-	-	-	Screw Mounting	-	Others	Screw Mounting	-	-	-	Screw Mounting	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Screw Hole Type	-	-	-	-	-	-	-	-	-	-	Countersunk Holes	-	-	-	With Screws	Countersunk Holes	-	-	-	-	-	-	-	-	-	Countersunk Holes	-	With Screws	Countersunk Holes	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
Next >>

Filter by:

Stock

- Show only stock items
Clear

Type
Images

Clear

Length L *Figure in () is the min length of the adjustable type.(mm)
6

6.5

19

32

33

36

40

40.5

42

44

45

48

50

51

52

55

56

60

61

62

65

70

72

75

76

77

80

82

84

85

90

94

95

96

97

100

101

102

104

106

107

108

113

115

124

125

126

127

138

140

150

155

158

161

162

170

183

200

224

1000

2500
Drawing

Clear

Operating Environment
- Standard
- Corrosion Resistance
Clear

Main Body Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Zinc Alloy
- Resin
Clear

Main Body Surface Treatment
- Not Provided
- Buffed Surface
- Tumble Polish
- Chrome Plating
- Colored Chromate
- Brushed
- Clear Anodize
- Gold Plating
- Satin
- Coating
- Mirror Surface
Clear

Width W(mm)
6

11.5

12

13

14

15

16

17

17.5

18

19

20

21

22

24

25

25.3

26

27

28.5

29

29.5

30

32.4

33.5

39

40

40.2

42

45

47.8

48

49

50

51

53

57

60

61

62

63

65

66

67

68

70

71

72

76

78

79

80

82

83

85

87

88

91

100

101

102.5

110

114

116

125

168

170

180
Drawing

Clear