Tightening Fittings（Thread Nominal：1/8 Page 2）

?* Information on days to ship and prices

• 

  Junron Brass Nipple Joint Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.94 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.18 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Service Tee

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.28 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fitting Female Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Fittings Bulkhead Female Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.85 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Male Bulkhead Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.09 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Fitting Positionable Elbow

  JUNKOSHA

  Usable across a broad temperature range. Free of tubing wear due to over-tightening of cap nuts or the like. Connected parts will not break unless the tube ruptures. Does not require regular cap nut torque tightening.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel

  JUNKOSHA

  [Features]
  ▪ Stainless steel fittings for flexible tubing.
  ▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
  · Tightening torque of the cap nut does not need to be managed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.68 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  QuickSeal Series Insertion Type (Brass Specifications) 90° Elbow (mm Size)

  NITTA

  This 90° brass elbow (mm size) consists of three parts: fitting body, nut, and sleeve. The fitting body and insert come integrated. Also, it is superb in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.87 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Brass Specifications), Tee (mm Size)

  NITTA

  Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
  
  [Features]
  · Screw-in type.
  · Three parts included: fitting body, nuts and sleeve(s).
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also features excellent performance under negative pressure.
  · Only the connectors are sealed.
  · Does not require sealing tape.
  Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.06 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series Insert Type (with Brass Specifications) Swivel Nut Female Connector (mm Size)

  NITTA

  Brass specifications swivel nut female connector with fitting body (mm size), nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Only connectors are sealed.
  · Does not require sealing tape.
  JISB8381-1995 (flexible hose pipe fittings for pneumatic use) compliant product.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.76 €
  	Special price
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Connector (mm Size)

  NITTA

  A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrate excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series, Insertion Type (Stainless Steel Specifications) 90° Elbow (Sized in Millimeters)

  NITTA

  A 3-point stainless steel 90° elbow (millimeter sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.07 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Tee (mm Size)

  NITTA

  A 3-point stainless steel specification tee (mm sized) with fitting body, nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  ·Excellent sealing performance.
  · Integrated fitting body and insert.
  · Also has excellent performance under negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	60.41 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert-Less Type Connector

  NITTA

  Consists of three parts: connector fitting unit, nut, and sleeve. The effective cross-sectional area is larger without an insert.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting unit, nut, and sleeve.
  · Guarantees a high flow rate.
  · Has no insert, giving it a wider cross-section.
  · Only the connectors are sealed, so there is no need to wrap them with sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert-Less Type 90° Elbow

  NITTA

  90° elbow consisting of three parts: fitting body, nut, and sleeve. The effective sectional area is larger without insert.
  
  [Features]
  · Screw-in type.
  · Three parts: fitting body, nut, and sleeve.
  · High flow rate can be maintained.
  · Only connectors are sealed.
  · Does not require sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series DK Tube Dedicated Type Tee

  NITTA

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.96 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Nylon Coil Tube Dedicated Type Connector

  NITTA

  It consists of three parts: fitting body of connector, nut, and sleeve. Fitting dedicated to nylon coil tubes.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.45 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  QuickSeal Series Insertion Type (Stainless Steel) 90° Elbow (Inch Size)

  NITTA

  A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.56 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series - Insert Type (Brass) - 90° Elbow (Inch Size)

  NITTA

  A brass 90° elbow (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series Insert Type (Brass) Service Tee (Inch Size)

  NITTA

  A 3-point brass service tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.84 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Swivel Nut Female Connector (Inch Size)

  NITTA

  A 3-point brass swivel nut female connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.93 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Tee (Inch Size)

  NITTA

  A 3-point brass swivel tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Seal Series Insert Type (Brass) Female Connector (Inch Size)

  NITTA

  A 3-point brass female connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.16 €
  	Special price
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series, 90° Elbow【5 Pieces Per Package】

  NITTA

  Inner surface of 90° elbow is smooth due to injection molding. Also, it is excellent in non-dusting and non-polluting. A special polypropylene resin is used as a base material.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series Connectors【5 Pieces Per Package】

  NITTA

  Connectors are injection molded for a smooth inner surface. Does not generate dust or pollution. Uses a special polypropylene resin.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series, Service Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the service tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.19 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Chemifit CP Series, Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  KFT, Insert Fitting, Male Branch Tee

  SMC

  [Features] Used for branching at 90° angles from female threads on both sides. [Material] -EN CW614N Equiv.+EN CW617N Equiv..

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.21 €
  Min. Shipping Days ：	18 Days

  *Unit price with basic configuration

• 

  Insert Fittings KF Series, Male Run Tee KFY

  SMC

  It can be used for branching in the same direction from the internal thread and in 90° direction.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.21 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Insert Fittings KF Series, Swivel Elbow KFV

  SMC

  [Features]
  · Used for pipework proceeding at a right angle from a female thread.
  · A swivel type that can be positioned in any direction.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Insert Fittings KF Series, Swivel Extended Elbow KFW

  SMC

  [Features]
  · Used for piping in directions perpendicular to the female thread.
  · Extended swivel type that can swivel in any direction, facilitating three-dimensional piping.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.77 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel EN 1.4401 Equiv. Insert Fittings, Male Branch Tee, KFG2T Series

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  · Applicable tube outer diameter: metric p. 324, inches p. 329

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.81 €
  	Special price
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quick Seal Fitting (Insertless Connector)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.05 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Quick Seal Fitting (Insertless Tees)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Self-Align Fittings H / DL / L / LL Series Swivel Extended Elbow LL

  SMC

  A tightening-type fitting with a strong edge, ensuring external damage will not easily lead to impaired functionality.
  [Features]
  · A non-directional type sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · An extendable swivel type that can be positioned in any direction.
  · Allows for three-dimensional piping.
  [Applications]
  · Used for right-angle piping from female threads.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...