Thread Inserts

259

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Self-Tapping Inserts / Slotted

MISUMI

It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.24 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Nitronics 60

RECOIL

Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.80 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)

Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

TOKAI METAL INDUSTRY

A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ultrasert UD2 / UD4 (Brass Cadmium-Free)

Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

TOKAI METAL INDUSTRY

These inserts are the best choice for easy and secure fitment into plastic holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ensat, Slotted Type 302

KKV

Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts self-tapping with cutting slot (K0978)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting slot
・Material: Stainless steel, Steel
・Surface finish body: Bright, galvanised
・D1=Internal thread: M3-M16

[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Thread Inserts

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Dodge Bit Insert Flange Type (Brass Cadmium-Free)

Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

TOKAI METAL INDUSTRY

General purpose type. Low cost and well balanced.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.29 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Recoil-Free (mm) SUS304

Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

RECOIL

Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ensat, Type 308, 3-Hole / Long Size

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded Inserts (K0398)

KIPP

[Specifications]
・Version 1: Standard
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-14.8
・D1=Internal thread: M5-M12x1.25

[Features]
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.69 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Heat Lock (Type HL)

Heat Lock (Type HL)【1-1,000 Pieces Per Package】

JAPAN DRIVE-IT

· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts reinforced (K0399)

KIPP

[Specifications]
・Version 1: Reinforced
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-31
・D1=Internal thread: M4-M24x2

[Features]
・Stronger cross section for inserts with an increased load
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.69 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel / Insert Nut Threaded Type / IRU

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.98 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Ensat, Ultra Coarse Outside Screw, Type 309

KKV

Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Techlock (SL)

Techlock (SL)【1-5,000 Pieces Per Package】

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.23 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded insert steel self-tapping type B (K1538)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: with cutting bore
・Material: Steel
・Surface finish body: Galvanised
・D1=Internal thread: M8

[Features]
・Compatible with Bosch profile
・Standard thread M8
・Easy to install

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Threaded inserts self-tapping with cutting bores (K0979)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting bore
・Material: Stainless steel, Steel
・D1=Internal thread: M3-M12

[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel-Insert bushings

GANTER

Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.22 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Thread Insert (Box)

Thread Insert (Box)【100 Pieces Per Package】

MISUMI

For your own stock or for a large number of uses, buying per box is beneficial.

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Brass Insert Nut (Screw-In Type) IRB / IRB-C

HIROSUGI-KEIKI

[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing

Select to compare

Configure now
Starting from^∗ ：	0.64 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Brass Bit Insert (Flanged) / HFB

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Threaded inserts self-tapping with cutting slot (07652)

NORELEM

· For making high-strength screw connections in materials with low shear strength

· Guarantees secure and firm anchoring in the host material

· Ideal for difficult-to-machine materials

· Version: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	0.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Threaded inserts reinforced (07661)

NORELEM

· Stronger cross section for inserts with an increased load

· Enables tapped holes which have been damaged to be used again or repaired

· Suitable for use in various materials

· Quick and easy installation

· No other special tools are needed besides the assembly tool

Select to compare

Configure now
Starting from^∗ ：	4.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Ensat Three-Hole / Short 307 Type

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 7965 Screwed inserts

REYHER

RAMPA couplings; Screwed inserts; Slotted nuts

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Threaded inserts reinforced internal thread self-locking (07664)

NORELEM

· Enables tapped holes which have been damaged to be used again or repaired

· Suitable for use in various materials

· Quick and easy installation

· No other special tools are needed besides the assembly tool

Select to compare

Configure now
Starting from^∗ ：	10.79 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Sprue (Unify) (UNF)

Sprue (Unify) (UNF)【1-100 Pieces Per Package】

NIPPON SPREW

Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Lock Recoil (Millimeter) SUS304

RECOIL

Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat Head Sonic Lock (Type SHK)

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

ART 88302 ENSAT-Thread inserts

REYHER

ENSAT inserts; Screwed inserts

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.41 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ensat Expanded Slot Type, Model 302, Inch Type

KKV

[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.

[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Threaded Inserts (07660)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	4.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Insert Phosphor Bronze

RECOIL

Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.18 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert, Inconel X-750

RECOIL

The color of the main body will become silver when the method of heat treatment changes.

Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.

[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TEC Sonic (TEC Type)

TEC Sonic (TEC Type)【1-500 Pieces Per Package】

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	1.34 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Brass Bit Insert (Standard, Both Faces) / HSB-Z

HIROSUGI-KEIKI

[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Brass Mini Bit Inserts / HMIB-Z

HIROSUGI-KEIKI

[Nominal of Thread (M)] 1.4/1.6/1.7
[Usage Method] Press-fitting / Heated Press-fitting
[Compatible Resin] Thermoplastic
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Brass Ultrasert IV / HUD IV

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.29 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Insert bushings, Aluminium

GANTER

Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	8.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts self-tapping with cutting bores (07653)

NORELEM

Select to compare

Configure now
Starting from^∗ ：	0.61 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)

DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1-15,000 Pieces Per Package】

TOKAI METAL INDUSTRY

General purpose type. Low cost and well balanced.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.19 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Recoil Packet (UNF)

Recoil Packet (UNF)【5-10 Pieces Per Package】

RECOIL

*Unfortunately, only lengths of 1.5D are available.

[Features]
• Recoil created by winding high quality stainless steel wire with a rhomboid cross section into a spring shape
• Insert is made one turn larger than the base material hole, and has a mild taper
• Once installed, the spring action makes it an almost permanent fixture that cannot be extracted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.84 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Recoil-Free (mm) SUS304

RECOIL

The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Application
Material
Screw Type
Screw Dia. M (after insertion)(mm)
Thread Dia. (After inserted), Unified(inch)
Length L (after insertion) (D = Thread Dia. M)
Notch
Shape
Sales Unit

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare
Brand	MISUMI	RECOIL	TOKAI METAL INDUSTRY	TOKAI METAL INDUSTRY	KKV	KIPP	MISUMI	TOKAI METAL INDUSTRY	RECOIL	KKV	KIPP	JAPAN DRIVE-IT	KIPP	HIROSUGI-KEIKI	KKV	JAPAN DRIVE-IT	KIPP	KIPP	GANTER	MISUMI	HIROSUGI-KEIKI	HIROSUGI-KEIKI	NORELEM	NORELEM	KKV	REYHER	NORELEM	NIPPON SPREW	RECOIL	JAPAN DRIVE-IT	REYHER	KKV	NORELEM	RECOIL	RECOIL	JAPAN DRIVE-IT	HIROSUGI-KEIKI	HIROSUGI-KEIKI	HIROSUGI-KEIKI	HIROSUGI-KEIKI	GANTER	NORELEM	TOKAI METAL INDUSTRY	RECOIL	RECOIL
Product Series	Self-Tapping Inserts / Slotted	Insert Nitronics 60	Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】	Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】	Ensat, Slotted Type 302	Threaded inserts self-tapping with cutting slot (K0978)	Thread Inserts	Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】	Recoil-Free (mm) SUS304【1-3 Pieces Per Package】	Ensat, Type 308, 3-Hole / Long Size	Threaded Inserts (K0398)	Heat Lock (Type HL)【1-1,000 Pieces Per Package】	Threaded inserts reinforced (K0399)	Stainless Steel / Insert Nut Threaded Type / IRU	Ensat, Ultra Coarse Outside Screw, Type 309	Techlock (SL)【1-5,000 Pieces Per Package】	Threaded insert steel self-tapping type B (K1538)	Threaded inserts self-tapping with cutting bores (K0979)	Stainless Steel-Insert bushings	Thread Insert (Box)【100 Pieces Per Package】	Brass Insert Nut (Screw-In Type) IRB / IRB-C	Brass Bit Insert (Flanged) / HFB	Threaded inserts self-tapping with cutting slot (07652)	Threaded inserts reinforced (07661)	Ensat Three-Hole / Short 307 Type	DIN 7965 Screwed inserts	Threaded inserts reinforced internal thread self-locking (07664)	Sprue (Unify) (UNF)【1-100 Pieces Per Package】	Lock Recoil (Millimeter) SUS304	Flat Head Sonic Lock (Type SHK)	ART 88302 ENSAT-Thread inserts	Ensat Expanded Slot Type, Model 302, Inch Type	Threaded Inserts (07660)	Insert Phosphor Bronze	Insert, Inconel X-750	TEC Sonic (TEC Type)【1-500 Pieces Per Package】	Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S	Brass Bit Insert (Standard, Both Faces) / HSB-Z	Brass Mini Bit Inserts / HMIB-Z	Brass Ultrasert IV / HUD IV	Insert bushings, Aluminium	Threaded inserts self-tapping with cutting bores (07653)	DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1-15,000 Pieces Per Package】	Recoil Packet (UNF)【5-10 Pieces Per Package】	Recoil-Free (mm) SUS304
CAD	2D / 3D					2D / 3D	2D / 3D				2D / 3D		2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D																					2D / 3D
Starting from^∗	1.24 € *Unit price with basic configuration Volume Discount	2.80 € *Unit price with basic configuration Volume Discount	0.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.36 € *Unit price with basic configuration	1.03 € *Unit price with basic configuration Volume Discount	0.29 € *Unit price with basic configuration Volume Discount	0.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.12 € *Unit price with basic configuration Volume Discount	3.69 € *Unit price with basic configuration	0.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.69 € *Unit price with basic configuration	0.98 € *Unit price with basic configuration	0.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.23 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.38 € *Unit price with basic configuration	0.51 € *Unit price with basic configuration	14.22 € *Unit price with basic configuration Volume Discount	46.81 € *Unit price with basic configuration	0.64 € Special price *Unit price with basic configuration Promotional pricing	0.42 € *Unit price with basic configuration	0.43 € *Unit price with basic configuration	4.43 € *Unit price with basic configuration	1.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.36 € *Unit price with basic configuration Volume Discount	10.79 € *Unit price with basic configuration	1.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.37 € *Unit price with basic configuration Volume Discount	1.41 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.98 € *Unit price with basic configuration Volume Discount	4.43 € *Unit price with basic configuration	1.18 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	20.98 € *Unit price with basic configuration Volume Discount	0.34 € *Unit price with basic configuration Volume Discount	1.34 € *Unit price with basic configuration	0.24 € Special price *Unit price with basic configuration Promotional pricing	0.39 € *Unit price with basic configuration	0.29 € Special price *Unit price with basic configuration Promotional pricing	8.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.61 € *Unit price with basic configuration	0.19 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	7.84 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	2.02 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	Same day	Same day	Same day	4 Days	Same day	4 Days	12 Days	Same day	Same day	4 Days	4 Days	7 Days	5 Days	Same day	5 Days	4 Days	4 Days	Same day	2 Days	4 Days	Same day	Same day	6 Days	Same day	6 Days	4 Days	Same day	5 Days	6 Days	12 Days	Same day	5 Days	Same day	Same day	4 Days	Same day	Same day	5 Days
Specifications					Stock			Stock	Stock											Stock
Type	Self-Tapping	Standard	Standard	Standard	Self-Tapping	-	Standard	Standard	Standard	Self-Tapping	-	Press Fit	-	Self-Tapping	Self-Tapping	Press Fit	-	-	-	Standard	Self-Tapping	Press Fit	-	-	Self-Tapping	-	-	Standard	Standard	Press Fit	-	Self-Tapping	-	Standard	Standard	Press Fit	Self-Tapping	Press Fit	Press Fit	Press Fit	-	-	Standard	Standard	Standard
Application	Light Metal	Light Metal	Resin General	Resin General	-	-	Light Metal	Resin General	Light Metal	-	-	Resin General	-	Cast Iron	-	-	-	-	-	Light Metal	Light Metal	Light Metal	-	-	-	-	-	Light Metal	Light Metal	-	-	-	-	Light Metal	Light Metal / Cast Iron	-	Cast Iron	Light Metal	Light Metal	Light Metal	-	-	Resin General	Light Metal	Light Metal
Material	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Nitrox 60	Brass	Brass	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass	Steel / Stainless steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Steel / Stainless steel	Brass	Steel / Stainless steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Brass	Brass	Steel	Steel / Stainless steel	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Brass	Steel / Stainless steel	Steel / Stainless steel	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Steel / Brass	Stainless steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	-	Steel	Steel / Stainless steel	Phosphor Bronze	Inconel X-750	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Brass	Brass	-	Steel / Stainless steel	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)
Screw Type	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread / Metric (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	Metric (Coarse) Thread	-	-	Unified (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Unified (Coarse) Thread / Unified (Fine) Thread / BSW (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	Metric (Coarse) Thread	Unified (Fine) Thread	Metric (Fine) Thread
Screw Dia. M (after insertion)(mm)	3 ～ 12	3 ～ 12	1.6 ～ 8	2 ～ 10	2.5 ～ 30	-	3 ～ 16	2 ～ 8	2 ～ 42	3 ～ 16	-	3 ～ 6	-	2 ～ 8	3 ～ 16	2 ～ 10	-	-	M 8 ～ M 16	3 ～ 8	2 ～ 8	2 ～ 5	-	-	3 ～ 16	3 ～ 12	-	-	3 ～ 24	2 ～ 8	-	-	-	3 ～ 24	3 ～ 12	2 ～ 8	2.6 ～ 8	1.4 ～ 5	1.4 ～ 1.7	2 ～ 10	M 8 ～ M 16	-	1.4 ～ 6	-	8 ～ 24
Thread Dia. (After inserted), Unified(inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1/2-20 ～ #10-32	-	-	-	1/2" ～ No. 10	-	-	-	-	-	-	-	-	-	-	-	1/2-20 ～ #10-32	-
Length L (after insertion) (D = Thread Dia. M)	-	1D / 1.5D / 2D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D	-	-	1D / 1.5D / 2D / 3D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D / 2.5D / 3D	-	-	1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D	-	1D / 1.5D / 2D / 2.5D	-	-	-	1D / 1.5D / 2D	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D	-	-	-	-	-	1D / 1.5D / 2D / 3D	1D / 1.5D / 2D	1.5D / 2D	-	-	-	1D / 1.5D / 2D	1D / 1.5D / 2D	1.5D / 2D	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D	1.5D / 2D	1D / 1.5D / 2D	-	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D	1.5D	1D / 1.5D / 2D
Notch	Not Provided	Provided	Not Provided	Not Provided	-	-	Provided	Not Provided	Provided	-	-	Not Provided	-	Not Provided	-	Not Provided	-	-	-	Provided	Not Provided	Not Provided	-	-	-	-	-	Provided	Provided	Not Provided	-	Not Provided	-	Provided	Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	Not Provided	Provided	Provided
Shape	Slotted	-	Standard	Standard	Slotted	-	-	Standard	-	3-Hole Type	-	Standard	-	Standard	Standard	Standard	-	-	-	-	Standard	Standard	-	-	3-Hole Type	-	-	-	-	Standard	-	Slotted	-	-	-	Standard	Slotted	Standard	Standard	Standard	-	-	Standard	-	-
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	-	-	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	-	Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	Low Quantity (Available beginning with 1 pc.)	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	Box, Pkg.	Box, Pkg.	Box, Pkg.	Box, Pkg.	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)