Thread Inserts（Material：Steel）

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (K0978)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting slot
  ・Material: Stainless steel, Steel
  ・Surface finish body: Bright, galvanised
  ・D1=Internal thread: M3-M16
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (K0399)

  KIPP

  [Specifications]
  ・Version 1: Reinforced
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-31
  ・D1=Internal thread: M4-M24x2
  
  [Features]
  ・Stronger cross section for inserts with an increased load
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  DIN 7965 Screwed inserts

  REYHER

  RAMPA couplings; Screwed inserts; Slotted nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Threaded Inserts (K0398)

  KIPP

  [Specifications]
  ・Version 1: Standard
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-14.8
  ・D1=Internal thread: M5-M12x1.25
  
  [Features]
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (K0979)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting bore
  ・Material: Stainless steel, Steel
  ・D1=Internal thread: M3-M12
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded insert steel self-tapping type B (K1538)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: with cutting bore
  ・Material: Steel
  ・Surface finish body: Galvanised
  ・D1=Internal thread: M8
  
  [Features]
  ・Compatible with Bosch profile
  ・Standard thread M8
  ・Easy to install

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (07661)

  NORELEM

  · Stronger cross section for inserts with an increased load
  
  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Threaded Inserts (07660)

  NORELEM

  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (07652)

  NORELEM

  · For making high-strength screw connections in materials with low shear strength
  
  · Guarantees secure and firm anchoring in the host material
  
  · Ideal for difficult-to-machine materials
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (07653)

  NORELEM

  · For making high-strength screw connections in materials with low shear strength
  
  · Guarantees secure and firm anchoring in the host material
  
  · Ideal for difficult-to-machine materials
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.61 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ensat Expanded Slot Type, Model 302, Inch Type

  KKV

  [Features]
  · Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
  · The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
  · If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
  
  [Materials]
  SUM22L free-cutting steel (equivalent), hexavalent chromate

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Threaded insert steel self-tapping type B (10228)

  NORELEM

  · Compatible with Bosch profile
  
  · Standard thread M8
  
  · Easy to install

  Select to compare

  Configure now
  Starting from∗ ：	1.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Chip-Free / Long, Type 338

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Iron, Ensat Small Outside Three-Hole / Short 347 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Threaded inserts solid body (07662)

  NORELEM

  · For use where threaded holes have been drilled too large or drill hole spacings have not been observed
  
  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	16.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Iron, Ensat, Small Outside Diameter Slotted Type 303

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.65 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Iron, Ensat, with Pin / Long Type 318

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Select to compare

  Configure now
  Starting from∗ ：	5.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Chip-Free / Short, Type 337

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Self Floating Fastener【1-1,000 Pieces Per Package】

  SEL JAPAN

  Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Iron, Ensat Small Outside Three-Hole / Long348 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts solid body (K0400)

  KIPP

  [Specifications]
  ・Version 1: full body
  ・Material: Steel
  ・D2=External thread: M8-M30x2
  
  [Features]
  ・For use where threaded holes have been drilled too large or drill hole spacings have not been observed
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...