Screw plugs (metric, imperial)

111

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

Threaded plugs, Steel

GANTER

The dimensions of the threaded plugs GN 749 comply with DIN 908, but deviating from the latter is the elastic sealing ring (rubber). This sealling ring is retained in a radial undercut in the mating face which prevents it from dropping out and in particular it does not extrude when the plug is tightened.
The details relating to the permissible opreating pressure are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded plugs

GANTER

The gaskets in types AC and AA correspond to the gaskets DIN 7603, type A (flat gaskets).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.32 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hex Socket Head Taper Plug (Sink)

Hex Socket Head Taper Plug (Sink)【1-1,000 Pieces Per Package】

SUNCO

Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.35 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 3405 Lubricating nipples

REYHER

[Specifications]
・Shape: Standard
・Material: Steel
・Surface Treatment: Zinc Plating
・Nominal diameter(mm): 6, 8

[Features]
・Lubricating nipples, cupped type
・DIN 3405

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.44 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Hex Socket Screw Plug With Flange_SFM / SFMS

NABEYA BI-TECH

O-ring included. Since it is a parallel screw, there is no distortion of the female screw side material as when tapered screws are tightened. Appropriate for applications requiring a large amount of mounting/detaching such as with hydraulic equipment, pneumatic equipment, etc.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.87 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Screw Plugs / Standard

MISUMI

[Features] There are 3 types: without through hole, with through hole and with seat. [Material] -EN 1.1191 Equiv./EN 1.7220 Equiv.

Volume Discount

Order quantities extended (D-JIT)

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.04 €
Min. Shipping Days ：	Quote

*Unit price with basic configuration

Orifice Set

SUNCO

A nozzle set with a black oxide coating that is compatible with thread diameters M4 to M8 and nozzle diameters ø0.5 to ø2.0.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hex Socket Head Screwed Plug _SFP

Hex Socket Head Screwed Plug _SFP【1-10 Pieces Per Package】

NABEYA BI-TECH

Use for compressed spring retention or spring load reduction applications.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.44 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Screw plugs with collar and hexagon socket DIN 908 (K1130)

KIPP

[Specifications]
・Material: Steel
・Surface finish body: galvanised
・Form: A
・D(mm): 12-55
・DIN 908

[Features]
・For plugging parallel internal threads

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.30 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

PEEK (Polyetheretherketone) Taper Plug

NIPPON CHEMICAL SCREW

[Shape] Standard
[Mount hole shape] Hex hole
[Material] PEEK
[Surface treatment] None nominal thread designation (R) 1/8 1/4 3/8
[Length (mm)] 8 11 12

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Screw plugs hex head with collar DIN 910 (K1131)

KIPP

[Specifications]
・Material: Steel
・Surface finish body: galvanised
・Form: A
・DIN 910

[Features]
・Screw plugs with collar and hexagonal head for plugging holes with parallel threads

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.72 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

DIN 7604 Hex. head screw plugs

REYHER

Hexagon head screw plugs; Screw plugs; Screws with fine thread

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.08 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

blanking screw, NPQH Series

FESTO

[Specifications]
・Product type: Plug screw
・Housing material: Brass
・Surface Treatment: Nickel Plating
・Pneumatic connection 1: External thread G1/2, G1/4, G1/8, G3/8, M5
・Corrosion resistance class (CRC): 3 - High corrosion stress

[Features]
・Solid-metal brass, chemically nickel-plated
・High corrosion and chemical resistance
・Highly resistant to temperatures and pressure

Select to compare

Configure now
Starting from^∗ ：	0.95 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Blanking plug, B Series

FESTO

[Specifications]
・Housing material: Steel
・O-ring material: PA, TPE-U(PUR), Stainless steel, NBR

[Features]
・Aluminium, stainless steel
・With sealing ring
・Variants recommended for production systems for manufacturing lithium-ion batteries

Select to compare

Configure now
Starting from^∗ ：	0.89 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Flange Hex Socket Head Screwed Plug _SPN-L

NABEYA BI-TECH

Screw plug with high hydraulic specifications. Metric fine thread and pipe parallel thread are standardized.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.60 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GOSHO (GM)

GOSHO (GM)【1-500 Pieces Per Package】

GOSHO WORKS

[Features]
· The GM type plug is a level seal type (flush type) developed by Gosho. When the plug is screwed into PT (pipe taper) female threading specified in JISB0203, a reference diameter is established near the large end face so that its large end face is almost flush with the mounting face.
· It recently has become the indispensable primary plug for hydraulic and pneumatic equipment.
· It has the advantages of a GM type plug and is a level seal type, so it becomes flush with the embedded and installed main body for a pleasing external appearance and also facilitates miniaturization of machinery
· Comes with a tightening interference, which enables substantial tightening, allowing it to withstand great internal pressure.
· The plug is subject to cold plastic working for high precision, and is heat processed to allow it to be used under high pressure.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.49 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Taper Thread Plug, Sink, NPT (for American Pipes)

SUNCO

[Shape] Standard
[Mount hole shape] Hex hole
[Material] Stainless steel
[Surface treatment] Untreated plug
[Type] Sink plug
[Sales unit] Discrete (can be purchased single units) nominal thread designation (NPT/NPTF) 1/16 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
[Length (mm)] 6 7 9 10 12 14

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	6.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 908 Hex. socket screw plug

REYHER

Hexagon socket screw plugs; Screw plugs

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.42 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Hex Socket Head Taper Plug, GJ Type

Hex Socket Head Taper Plug, GJ Type【1-500 Pieces Per Package】

GOSHO WORKS

Taper plug usable in high pressure (high airtightness) conditions developed for reliability.

[Features]
· The GJ type plug is referred to as a "float type" (JIS type), so when it is screwed into the PT or PS female thread specified in JISB0203, the standard diameter of the taper thread is established near the center of the length (I) so that the large end service is higher than the mounting surface.
· Conventionally, a PT plug with a square hole is specified by JIS in place of a hex hole for the GJ type, but recently in order to improve the safety and work efficiency of tightening, hex socket head GJ plugs capable of reliable tightening have come to be used in various quarters.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.31 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GOSHO Plug (GDL)

GOSHO Plug (GDL)【1-1,000 Pieces Per Package】

GOSHO WORKS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.76 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 3404 Lubricating nipples

REYHER

Lubrication nipples; Lubrication nipples, button head

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.30 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

DIN 906 Hex. socket pipe plugs

REYHER

Hexagon socket screw plugs; Screw plugs

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.27 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

DIN 910 Hex. head screw plugs

REYHER

Hexagon head screw plugs; Screw plugs

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.78 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Hex Socket Head Taper Plug, Sink Type, B Type

Hex Socket Head Taper Plug, Sink Type, B Type【1-100 Pieces Per Package】

NISSAN SCREW

The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment. Hardness 32 to 42HRC product.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.48 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Screw plugs with hexagon socket DIN 906 tapered thread (K1129)

KIPP

[Specifications]
・Material: Steel, Stainless Steel
・Surface finish body: Bright, galvanised

[Features]
・For plugging parallel internal threads
・DIN 906

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Lock Screw Type 1

OHKITA

A set screw for press dies.
Standard type.
Can be purchased individually.
Material = SCM435 (M3 to M12), S45C (M14 and above)
Hardness = HRC 45-53 (M3-M10), HRC 34-44 (M12 or more)
Surface processing: Black oxide / temper color

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.26 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lock Screw Type 2

OHKITA

A set screw for press dies.
Overlaying with Type 1 prior to tightening results in a powerful locking force.
The hex socket is one size larger than the same diameter Type 1 to enable fastening of Type 1 without removing Type 2.
Can be purchased individually.
Material = S45C
Hardness = HRC 34-44
Surface processing: Black oxide / temper color

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DIN 906 Hex. socket pipe plugs with fine thread

REYHER

Hexagon socket screw plugs; Screw plugs; Screws with fine thread

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.27 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Screw plugs aluminium with magnet (K0453)

KIPP

[Specifications]
・Material: Aluminum, Ferrite permanent magnet
・Surface finish body: Bright
・D1: G1/4-G1

[Features]
・Mounting close to the ground prevents damage to mechanical components

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hex Socket Head Taper Plug, Sink Type, DB Type

NISSAN SCREW

Requires no sealant, and becomes flush with the female thread member when tightened. For overseas partner products, hydraulic equipment or automobiles.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.82 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Plastic Hex Socket Head Taper Plug

SUNCO

Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	7.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Plug -SH (Square Head)

Plug -SH (Square Head)【1-100 Pieces Per Package】

SUNCO

[Material] Steel, stainless steel SUS316L Stainless steel
[Surface treatment] Untreated, chromate, bright chromate, black oxide film

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Plug (NPTF (Sink (DB)))

Plug (NPTF (Sink (DB)))【1-100 Pieces Per Package】

NISSAN SCREW

[Shape] Standard
[Mount hole shape] Hex hole
[Material] Alloy steel for structures
[Surface treatment] Black oxide film plug
[Type] Sink plug nominal thread designation (NPT/NPTF) 1/16 1/8 1/4 3/8 1/2
[Length] ±0.4 (mm) 6.35 10.3 13.5
[Sales unit] Discrete (can be purchased single units)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.72 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Lock Screw Type 3 Short Type

OHKITA

A set screw for press dies.
Using together with Type 1 achieves a synergistic locking effect.
Short type (thin).
Can be used when the plate is thin.
Can be purchased individually.
Material = S45C
Hardness = HRC 34-44
Surface processing: Black oxide

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.26 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 908 Hex. socket screw plug with fine thread

REYHER

Hexagon socket screw plugs; Screw plugs; Screws with fine thread

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.45 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

DIN 909 Hex. head screw plugs

REYHER

Hexagon head screw plugs; Screw plugs

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.44 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Screw plugs with hexagon socket (K1102)

KIPP

[Specifications]
・Material: Steel
・Surface finish body: Bright
・D=outside diameter(mm): 15-55

[Features]
・Operating temperature: -20℃ to+100℃
・Operating pressure up to 70 bar

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.98 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Screw plugs with hexagon socket DIN 906 tapered thread (28013)

NORELEM

· For plugging parallel internal threads

· Version: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	0.23 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hex Socket Head Taper Plug, Sink Type, NB Type

NISSAN SCREW

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.30 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hex Socket Head Taper Plug, Float Type, A Type

Hex Socket Head Taper Plug, Float Type, A Type【1-1,000 Pieces Per Package】

NISSAN SCREW

Depending on the position of the reference diameter, there are two types: the sinking type and the floating type. [Features]They are used for sealing in areas such as hydraulic systems, pneumatic systems, pumps and automobiles.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.29 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GOSHO Plug (GD)

GOSHO Plug (GD)【1-300 Pieces Per Package】

GOSHO WORKS

[Features]
· The GD type plug is a general dry seal type plug with a standard diameter position based on the American standard dry seal pipe thread (NPTF) standardized in ANSIB2.2.
· GoshoGD series is a dry-seal type hex socket plug that uses NPTF to provide strength even without using glue, and features excellent durability and long-lasting performance.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.63 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Taper Sink Plug

Taper Sink Plug【14-19 Pieces Per Package】

TRUSCO NAKAYAMA

Feature
· Stopper for piping.

Applications
· General hydraulic equipment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.54 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stocking Plug (Sunken) Gosho Industrial

SUNCO

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Pressure compensation element, A-EXB

PHOENIX CONTACT

Select to compare

Configure now
Starting from^∗ ：	56.71 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Screw plugs (K0450)

KIPP

[Specifications]
・Main material: Thermoplastic
・Main colour: Black
・D=outside diameter(mm): 8.2-35

[Features]
・Permanent application temperature 100℃
・Short-term application temperature 120℃
・Fiberglass reinforced
・On request: O-ring or higher strength materials

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Shape
Mounting Hole Shape
Nominal of Thread (M)
Nominal of Thread (R)
Nominal of Thread (G)
Nominal of Thread (NPT/NPTF)
Length(mm)
Material
Surface Treatment
Plug Type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	GANTER	GANTER	SUNCO	REYHER	NABEYA BI-TECH	MISUMI	SUNCO	NABEYA BI-TECH	KIPP	NIPPON CHEMICAL SCREW	KIPP	REYHER	FESTO	FESTO	NABEYA BI-TECH	GOSHO WORKS	SUNCO	REYHER	GOSHO WORKS	GOSHO WORKS	REYHER	REYHER	REYHER	NISSAN SCREW	KIPP	OHKITA	OHKITA	REYHER	KIPP	NISSAN SCREW	SUNCO	SUNCO	NISSAN SCREW	OHKITA	REYHER	REYHER	KIPP	NORELEM	NISSAN SCREW	NISSAN SCREW	GOSHO WORKS	TRUSCO NAKAYAMA	SUNCO	PHOENIX CONTACT	KIPP
Product Series	Threaded plugs, Steel	Threaded plugs	Hex Socket Head Taper Plug (Sink)【1-1,000 Pieces Per Package】	DIN 3405 Lubricating nipples	Hex Socket Screw Plug With Flange_SFM / SFMS	Screw Plugs / Standard	Orifice Set	Hex Socket Head Screwed Plug _SFP【1-10 Pieces Per Package】	Screw plugs with collar and hexagon socket DIN 908 (K1130)	PEEK (Polyetheretherketone) Taper Plug	Screw plugs hex head with collar DIN 910 (K1131)	DIN 7604 Hex. head screw plugs	blanking screw, NPQH Series	Blanking plug, B Series	Flange Hex Socket Head Screwed Plug _SPN-L	GOSHO (GM)【1-500 Pieces Per Package】	Taper Thread Plug, Sink, NPT (for American Pipes)	DIN 908 Hex. socket screw plug	Hex Socket Head Taper Plug, GJ Type【1-500 Pieces Per Package】	GOSHO Plug (GDL)【1-1,000 Pieces Per Package】	DIN 3404 Lubricating nipples	DIN 906 Hex. socket pipe plugs	DIN 910 Hex. head screw plugs	Hex Socket Head Taper Plug, Sink Type, B Type【1-100 Pieces Per Package】	Screw plugs with hexagon socket DIN 906 tapered thread (K1129)	Lock Screw Type 1	Lock Screw Type 2	DIN 906 Hex. socket pipe plugs with fine thread	Screw plugs aluminium with magnet (K0453)	Hex Socket Head Taper Plug, Sink Type, DB Type	Plastic Hex Socket Head Taper Plug	Plug -SH (Square Head)【1-100 Pieces Per Package】	Plug (NPTF (Sink (DB)))【1-100 Pieces Per Package】	Lock Screw Type 3 Short Type	DIN 908 Hex. socket screw plug with fine thread	DIN 909 Hex. head screw plugs	Screw plugs with hexagon socket (K1102)	Screw plugs with hexagon socket DIN 906 tapered thread (28013)	Hex Socket Head Taper Plug, Sink Type, NB Type	Hex Socket Head Taper Plug, Float Type, A Type【1-1,000 Pieces Per Package】	GOSHO Plug (GD)【1-300 Pieces Per Package】	Taper Sink Plug【14-19 Pieces Per Package】	Stocking Plug (Sunken) Gosho Industrial	Pressure compensation element, A-EXB	Screw plugs (K0450)
CAD	2D / 3D				2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D				2D / 3D										2D / 3D				2D / 3D		2D / 3D						2D / 3D								2D / 3D
Starting from^∗	1.12 € *Unit price with basic configuration Volume Discount	0.32 € *Unit price with basic configuration Volume Discount	0.35 € *Unit price with basic configuration Volume Discount	1.44 € *Unit price with basic configuration Volume Discount	5.87 € *Unit price with basic configuration Volume Discount	0.04 € *Unit price with basic configuration Volume Discount	1.56 € *Unit price with basic configuration Volume Discount	3.44 € *Unit price with basic configuration Volume Discount	0.30 € *Unit price with basic configuration	3.44 € *Unit price with basic configuration Volume Discount	0.72 € *Unit price with basic configuration	1.08 € *Unit price with basic configuration Volume Discount	0.95 € *Unit price with basic configuration	0.89 € *Unit price with basic configuration	4.60 € *Unit price with basic configuration Volume Discount	0.49 € *Unit price with basic configuration Volume Discount	6.61 € *Unit price with basic configuration Volume Discount	0.42 € *Unit price with basic configuration Volume Discount	0.31 € *Unit price with basic configuration Volume Discount	0.76 € *Unit price with basic configuration Volume Discount	2.30 € *Unit price with basic configuration Volume Discount	0.27 € *Unit price with basic configuration Volume Discount	0.78 € *Unit price with basic configuration Volume Discount	0.48 € *Unit price with basic configuration Volume Discount	0.20 € *Unit price with basic configuration	0.26 € *Unit price with basic configuration Volume Discount	1.49 € *Unit price with basic configuration Volume Discount	0.27 € *Unit price with basic configuration Volume Discount	2.53 € *Unit price with basic configuration	0.82 € *Unit price with basic configuration Volume Discount	7.92 € *Unit price with basic configuration Volume Discount	0.58 € *Unit price with basic configuration Volume Discount	0.72 € *Unit price with basic configuration Volume Discount	1.26 € *Unit price with basic configuration Volume Discount	0.45 € *Unit price with basic configuration Volume Discount	1.44 € *Unit price with basic configuration Volume Discount	0.98 € *Unit price with basic configuration	0.23 € *Unit price with basic configuration	0.30 € *Unit price with basic configuration Volume Discount	0.29 € *Unit price with basic configuration Volume Discount	0.63 € *Unit price with basic configuration Volume Discount	7.54 € *Unit price with basic configuration Volume Discount	0.78 € *Unit price with basic configuration Volume Discount	56.71 € *Unit price with basic configuration	0.48 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	Same day	3 Days	Same day	Quote	6 Days	Same day	4 Days	5 Days	4 Days	3 Days	3 Days	3 Days	Same day	Same day	Same day	3 Days	Same day	Same day	3 Days	3 Days	3 Days	Same day	4 Days	Same day	6 Days	3 Days	4 Days	Same day	6 Days	6 Days	Same day	Same day	3 Days	3 Days	4 Days	4 Days	Same day	Same day	Same day	Same day	6 Days	7 Days	4 Days
Specifications						Order quantities extended (D-JIT)
Shape	-	-	Standard	Standard	Flanged	-	-	Standard	-	Standard	-	Flanged	-	-	Flanged	Standard	Standard	Flanged	Standard	Standard	Standard	Standard	Flanged	Standard	-	Standard	Standard	Standard	-	Standard	Standard	Square Head	Standard	Standard	Flanged	Standard	-	-	Standard	Standard	Standard	Standard	Standard	-	-
Mounting Hole Shape	-	-	Hex Socket	-	Hex Socket	-	-	Hex Socket	-	Hex Socket	-	-	-	-	Hex Socket	Hex Socket	Hex Socket	-	Hex Socket	Hex Socket	-	-	-	Hex Socket	-	Hex Socket	Hex Socket (Through)	-	-	Hex Socket	Hex Socket	No Screw Hole	Hex Socket	Hex Socket	-	-	-	-	Hex Socket	Hex Socket	Hex Socket	Hex Socket	Hex Socket	-	-
Nominal of Thread (M)	-	-	-	-	5 ～ 27	-	-	12 ～ 36	-	-	-	-	-	-	10 ～ 48	-	-	-	-	-	-	-	-	-	-	3 ～ 68	12 ～ 68	-	-	-	-	-	-	8 ～ 33	-	-	-	-	-	-	-	-	-	-	-
Nominal of Thread (R)	-	-	1 ～ 3/8	-	-	-	-	-	-	1/8 ～ 3/8	-	-	-	-	-	1 ～ 3/8	-	-	1 ～ 3/8	-	-	-	-	1 ～ 3/8	-	-	-	-	-	-	1/4 ～ 3/8	1 ～ 3/8	-	-	-	-	-	-	1 ～ 3/8	1 ～ 3/8	-	-	1/4 ～ 3/8	-	-
Nominal of Thread (G)	1 ～ 3/8	1 ～ 3/8	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 3/8	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Nominal of Thread (NPT/NPTF)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 3/8	-	-	1 ～ 3/8	-	-	-	-	-	-	-	-	-	1/2 ～ 3/8	-	-	1/2 ～ 3/8	-	-	-	-	-	-	-	1 ～ 3/8	1/4 ～ 1/8	-	-	-
Length(mm)	-	-	6 ～ 22	-	6.5 ～ 16	-	-	10 ～ 18	-	8 ～ 12	-	-	-	-	8 ～ 16	6 ～ 22	6 ～ 22	-	8 ～ 26	6.35 ～ 16.7	-	-	-	6 ～ 16.5	-	3 ～ 25	6 ～ 20	-	-	6.35 ～ 13.5	8 ～ 12	8 ～ 24	6.35 ～ 13.5	6 ～ 8	-	-	-	-	6 ～ 19	7 ～ 19	7.9 ～ 19.6	7 ～ 10	7 ～ 10	-	-
Material	-	Steel	Stainless Steel ～ Steel	Steel	Steel	-	-	Steel	Steel	Plastic	Steel	Stainless Steel ～ Steel	Brass	Steel	Steel	Stainless Steel ～ Steel	Stainless Steel	Brass ～ Steel	Stainless Steel ～ Steel	Stainless Steel ～ Steel	Brass ～ Steel	Brass ～ Steel	Brass ～ Steel	Steel	Stainless Steel ～ Steel	Steel	Steel	Brass ～ Steel	-	Steel	Plastic	Stainless Steel ～ Steel	Steel	Steel	Stainless Steel ～ Steel	Steel	Steel	Stainless Steel ～ Steel	Steel	Steel	Stainless Steel ～ Steel	Stainless Steel	Steel	-	-
Surface Treatment	-	-	Chromate ～ Not Provided	Nickel Plating	Black Oxide ～ Not Provided	-	-	Black Oxide	-	Not Provided	-	Nickel Plating ～ Not Provided	Nickel Plating	-	Chromate	Bright Chrome Plating ～ Not Provided	Not Provided	Nickel Plating ～ Not Provided	Not Provided ～ Tempered Collar	Nickel Plating ～ Not Provided	Nickel Plating ～ Not Provided	Nickel Plating ～ Not Provided	Nickel Plating ～ Not Provided	Black Oxide ～ Chromate	-	Black Oxide	Black Oxide	Nickel Plating ～ Not Provided	-	Black Oxide	Not Provided	Chromate ～ Not Provided	-	Black Oxide	Nickel Plating ～ Not Provided	Not Provided	-	-	Black Oxide	Barrel, Passivation ～ Black Oxide	Not Provided	-	Not Provided	-	-
Plug Type	-	-	Sunk Head Plug	-	-	-	-	-	-	-	-	-	-	-	-	Sunk Head Plug	Sunk Head Plug	-	Floating Plug	Sunk Head Plug	-	-	-	Sunk Head Plug	-	-	-	-	-	Sunk Head Plug	Sunk Head Plug	-	Sunk Head Plug	-	-	-	-	-	Sunk Head Plug	Floating Plug	Floating Plug	Sunk Head Plug	Sunk Head Plug	-	-

Filter by:

Stock

- Show only stock items
Clear

Shape
Clear

Mounting Hole Shape
Clear

Nominal of Thread (M)
3

4

5

6

8

10

12

14

16

18

20

22

24

26

27

28

30

32

33

34

36

38

40

42

45

48

50

56

68
Clear

Nominal of Thread (R)
1

1 1/2

1 1/4

1/2

1/4

1/8

1/16

2

3/4

3/8
Clear

Nominal of Thread (G)
1

1 1/2

1 1/4

1/2

1/4

1/8

3/4

3/8
Clear

Nominal of Thread (NPT/NPTF)
1

1 1/2

1 1/4

1/2

1/4

1/8

1/16

2

3/4

3/8
Clear

Length(mm)
3

4

5

6

6.35

6.5

7

7.9

8

8.9

9

10

10.3

11

11.1

11.7

12

13.5

14

15

15.5

15.8

16

16.5

16.7

17

18

19

19.6

20

21

22

24

25

26

29

34
Clear

Material
Brass

Plastic

Stainless Steel

Steel
Clear

Surface Treatment
Barrel, Passivation

Black Oxide

Bright Chrome Plating

Chromate

Dacrotized

Dry Seal

Nickel Plating

Not Provided

Tempered Collar
Clear