Ejector sleeves, cylindrical（Boring method：Wire cutting & polishing）
Selection Support: Ejector Sleeves
- Technical information
- EJECTOR SLEEVES
Filter products by: Technical Standard
-
JIS -
DIN
?* Information on days to ship and prices
-
Ejector sleeves / steel / length configurable / concentricity 0.01
MISUMI
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： Quote
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Brand |
| Product composition |
| Material |
| Surface treatment |
| Head thickness |
| Shaft diameter tolerance |
| D/P (Shaft diameter)(mm) |
| V (Hole diameter)(mm) |
| Concentricity between the hole and shaft diameters |
| Boring method |
| Inner dia. tolerance |
| Tapered or not |
| Center pin tip shape |
| P (Tip diameter)(mm) |
| Technical Standard |
| |
| Brand | MISUMI |
| Product Series | Ejector sleeves / steel / length configurable / concentricity 0.01 |
| CAD |
|
| Starting from∗ | - |
| Min. Shipping Days | Quote |
| Brand | - |
| Product composition | Single sleeve |
| Material | EN 1.3343 Equiv. |
| Surface treatment | No |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| Shaft diameter tolerance | 0/-0.005 |
| D/P (Shaft diameter)(mm) | 3.2 ～ 14 |
| V (Hole diameter)(mm) | 0.8 ～ 12.2 |
| Concentricity between the hole and shaft diameters | ◎0.01 |
| Boring method | Wire cutting & polishing |
| Inner dia. tolerance | +0.01/0 |
| Tapered or not | No |
| Center pin tip shape | No |
| P (Tip diameter)(mm) | - |
| Technical Standard | JIS |
Loading...
Filter by:
-
Brand
- MISUMI
-
Product composition
- Single sleeve
-
Material
- EN 1.3343 Equiv.
- EN 1.2344 Equiv.
-
Surface treatment
- No
- Nitrided
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
- 3mm
- 5mm
- 7mm
- 8mm
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
- -0.01/-0.03
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
Concentricity between the hole and shaft diameters
-
Boring method
- Grinding
- Wire cutting & polishing
- Reaming
-
Inner dia. tolerance
-
Tapered or not
- Yes
- No
-
Center pin tip shape
-
P (Tip diameter)(mm)
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- 15 Days or Less
- 17 Days or Less
- 18 Days or Less
Categories related to Ejector sleeves, cylindrical
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.