STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 & STRAIGHT CENTER PIN SETS -DIN 1530 / EN 1.2344 Equiv. / Hardened (Part Numbers - CAD Download)

MISUMI

DIN Standard
New Product

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Specifications

Drawing / Product specification

D-ESDP

Part No.		[ M ]	[ H ]
D-ESDP	①	1.2344 equivalent	Base Material: 50～55HRC
D-ESDP	②	1.2344 equivalent	Base Material: 50～55HRC

[ ! ]Nitriding may extend to the head as it is applied after dimension V and D machining.
[ ! ]To add fitting processing, not applicable to combination with other than sets.

[ T ]V_H7 Dimension

V (sleeve)	Tolerance
2.0～ 3.0	+0.010 0

3.1～ 6.0	+0.012 0

6.1～10.0	+0.015 0

10.1～16.0	+0.018 0

Range of guaranteed shaft diameter precision (b1=L-x1)
x1 max.40

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
D-ESDP4-[40-200/0.01]-[1.5-2.5/0.1]-S[20-100/1]-X[60-300/5]
D-ESDP4.5-[40-200/0.01]-[1.5-3/0.1]-S[20-100/1]-X[60-300/5]
D-ESDP5-[40-300/0.01]-[2-3.5/0.1]-S[20-100/1]-X[60-400/5]
D-ESDP5.5-[40-300/0.01]-[2-4/0.1]-S[20-100/1]-X[60-400/5]
D-ESDP6-[40-450/0.01]-[2-4.5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP6.5-[40-450/0.01]-[2-4.5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP7-[40-450/0.01]-[2-5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP7.5-[40-450/0.01]-[2-5.5/0.1]-S[20-100/1]-X[60-550/5]
D-ESDP8-[70-500/0.01]-[2-6/0.1]-S[20-100/1]-X[90-600/5]
D-ESDP9-[70-500/0.01]-[2.5-7/0.1]-S[20-100/1]-X[90-600/5]
D-ESDP10-[70-500/0.01]-[2.5-8/0.1]-S[20-100/1]-X[90-600/5]
D-ESDP12-[70-500/0.01]-[2.5-10/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP12-[500.1-800/0.1]-[2.5-10/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP15-[70-500/0.01]-[2.5-12/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP15-[500.1-800/0.1]-[2.5-12/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP16-[70-500/0.01]-[3-13/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP16-[500.1-800/0.1]-[3-13/0.1]-S[20-100/1]-X[90-900/5]
D-ESDP20-[100-500/0.01]-[3-16/0.1]-S[20-100/1]-X[120-900/5]
D-ESDP20-[500.1-800/0.1]-[3-16/0.1]-S[20-100/1]-X[120-900/5]

Minimum order quantity	Standard Shipping Days ?	Head thickness	Shaft diameter tolerance	D/P (Shaft diameter) (mm)	V (Hole diameter) (mm)	L (L dimension) (mm)	S(V Hole Diameter Length) (mm)	X(Full Length of the Center Pin) (mm)
1	17 Days	3mm	-0.04/-0.012	4	1.5 ～ 2.5	40 ～ 200	20 ～ 100	60 ～ 300
1	17 Days	3mm	-0.04/-0.012	4.5	1.5 ～ 3	40 ～ 200	20 ～ 100	60 ～ 300
1	17 Days	3mm	-0.04/-0.012	5	2 ～ 3.5	40 ～ 300	20 ～ 100	60 ～ 400
1	17 Days	3mm	-0.04/-0.012	5.5	2 ～ 4	40 ～ 300	20 ～ 100	60 ～ 400
1	17 Days	5mm	-0.005/-0.014	6	2 ～ 4.5	40 ～ 450	20 ～ 100	60 ～ 550
1	17 Days	5mm	-0.005/-0.014	6.5	2 ～ 4.5	40 ～ 450	20 ～ 100	60 ～ 550
1	17 Days	5mm	-0.005/-0.014	7	2 ～ 5	40 ～ 450	20 ～ 100	60 ～ 550
1	17 Days	5mm	-0.005/-0.014	7.5	2 ～ 5.5	40 ～ 450	20 ～ 100	60 ～ 550
1	17 Days	5mm	-0.005/-0.014	8	2 ～ 6	70 ～ 500	20 ～ 100	90 ～ 600
1	17 Days	5mm	-0.005/-0.014	9	2.5 ～ 7	70 ～ 500	20 ～ 100	90 ～ 600
1	17 Days	5mm	-0.006/-0.017	10	2.5 ～ 8	70 ～ 500	20 ～ 100	90 ～ 600
1	18 Days	7mm	-0.006/-0.017	12	2.5 ～ 10	70 ～ 500	20 ～ 100	90 ～ 900
1	18 Days	7mm	-0.006/-0.017	12	2.5 ～ 10	500.1 ～ 800	20 ～ 100	90 ～ 900
1	18 Days	7mm	-0.006/-0.017	15	2.5 ～ 12	70 ～ 500	20 ～ 100	90 ～ 900
1	18 Days	7mm	-0.006/-0.017	15	2.5 ～ 12	500.1 ～ 800	20 ～ 100	90 ～ 900
1	18 Days	7mm	-0.006/-0.017	16	3 ～ 13	70 ～ 500	20 ～ 100	90 ～ 900
1	18 Days	7mm	-0.006/-0.017	16	3 ～ 13	500.1 ～ 800	20 ～ 100	90 ～ 900
1	18 Days	8mm	-0.007/-0.020	20	3 ～ 16	100 ～ 500	20 ～ 100	120 ～ 900
1	18 Days	8mm	-0.007/-0.020	20	3 ～ 16	500.1 ～ 800	20 ～ 100	120 ～ 900

Specification table

H	T	Part No.		L		V 0.1mm increments	S 1mm increments			X 0.1mm increments
		Type	D	0.01mm increments	0.1mm increments
8	3	D-ESDP (1.2344 equivalent Hardened)	4	40.00～200.00	-	1.5～ 2.5	20～100 ([ ! ]D4, D4.5 When V1.5～V1.9 20～40)			X≧L＋20 and X≦L＋100
			4.5			1.5～ 3.0
10			5	40.00～300.00		2.0～ 3.5
			5.5			2.0～ 4.0
12	5		6	40.00～450.00		2.0～ 4.5		L	(L－S) min.
			6.5			2.0～ 4.5		40.00～60.00	20
			7			2.0～ 5.0		60.01～	30
			7.5			2.0～ 5.5
14			8	70.00～500.00		2.0～ 6.0	20～100 (L－S)≧50
			9			2.5～ 7.0
16			10			2.5～ 8.0
18	7		12		500.1 ～ 800.0	2.5～10.0
22			15			2.5～12.0
			16			3.0～13.0
26	8		20	100.00～500.00		3.0～16.0

Head diameter/thickness of center pin
H2	T2	V (Center pin)
3	1.5	1.5
4	2	1.6～ 2.0
5	2	2.1～ 2.5
6	3	2.6～ 3.0
7		3.1～ 3.5
8		3.6～ 4.5
10		4.6～ 5.5
12	5	5.6～ 6.5
14		6.6～ 8.0
16		8.1～10.0
18	7	10.1～12.0
22	7	12.1～16.0

Order Example


Part No.	-	L	-	V	-	S	-	X
D-ESDP10	-	250.00	-	6.5	-	S80	-	X360

Alteration

Part No.

－

(KC・WKC···etc.)

D-ESDP10

－

150.3

－

2.5

－

S60

－

X215

－

HC14

Basic information

Brand	MISUMI	Product composition	Center pin sets	Material	EN 1.2344 Equiv.
Surface treatment	No	Concentricity between the hole and shaft diameters	◎0.08	Inner dia. tolerance	H7
Tapered or not	No	Center pin tip shape	No	Technical Standard	DIN

Configure

19Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- D-ESDP
Clear
Head thickness
- 3mm
- 5mm
- 7mm
- 8mm
Clear
Shaft diameter tolerance
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
Clear
D/P (Shaft diameter)(mm)
4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

12

15

16

20
Clear
V (Hole diameter)(mm)
[1.5-16/0.1mm Unit(s)]
Clear
L (L dimension)(mm)
[500.1-800/0.1mm Unit(s)][40-500/0.01mm Unit(s)]
Clear
S(V Hole Diameter Length)(mm)
[20-100/1mm Unit(s)]
Clear
X(Full Length of the Center Pin)(mm)
[60-900/5mm Unit(s)]
Clear
Filter by CAD data type
- 2D
- 3D
Clear