STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 / EN 1.2344 Equiv. / Hardened / ◎0.08 / Standard- (Part Numbers - CAD Download)

MISUMI

DIN Standard
New Product

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Specifications

Drawing / Product specification

D-ESD

L	100	125	150	175	200	250	300	350	400	450	500
S	50 (V1.5 40)		60	75		100	115		150

Range of guaranteed shaft diameter precision (b1=L－x1)
x1 max.40
[ ! ]Nitriding may extend to the head as it is applied after dimension V and D machining.
[ ! ]The diameter (D) portion of the stepped center pin cannot be inserted into the relief hole (C).

Type	[ M ]	[ H ]	[ T ] V	Applicable center pin shaft diameter tolerance
D-ESD	1.2344 equivalent	Base Material: 50～55HRC	H7	-0.01 -0.02	*Note that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance 0-0.005 is not recommended. The reason for this is the fitting section S are longer.

[ T ]D_g6

D≦6	6.5≦D≦10	12≦D≦16	D＝20
－0.004 －0.012	－0.005 －0.014	－0.006 －0.017	－0.007 －0.020

[ T ]V_H7

V≦3	3.5≦V≦6	6.5≦V≦10	V≧12
+0.010 0	+0.012 0	+0.015 0	+0.018 0

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
D-ESD4-[100-200/25]-[1.5,2,2.5]
D-ESD4.5-[100-200/25]-[1.5,2,2.5]
D-ESD5-[100-200/25]-[2,2.5,3]
D-ESD5-[250-300/50]-[2,2.5,3]
D-ESD5.5-[100-200/25]-[2,2.5,3,3.5]
D-ESD5.5-[250-300/50]-[2,2.5,3,3.5]
D-ESD6-[100-200/25]-[2,2.5,3,3.5,4]
D-ESD6-[250-450/50]-[2,2.5,3,3.5,4]
D-ESD6.5-[100-200/25]-[2.5,3,3.5,4]
D-ESD6.5-[250-450/50]-[2.5,3,3.5,4]
D-ESD7-[100-200/25]-[2.5,3,3.5,4,4.5,5]
D-ESD7-[250-450/50]-[2.5,3,3.5,4,4.5,5]
D-ESD7.5-[100-200/25]-[3,3.5,4,4.5,5]
D-ESD7.5-[250-350/50]-[3,3.5,4,4.5,5]
D-ESD8-[100-200/25]-[4,4.5,5,5.5,6]
D-ESD8-[250-500/50]-[4,4.5,5,5.5,6]
D-ESD9-[100-200/25]-[3.5,4,4.5,5,6,6.5]
D-ESD9-[250-500/50]-[3.5,4,4.5,5,6,6.5]
D-ESD10-[100-200/25]-[5,5.5,6,6.5,7]
D-ESD10-[250-500/50]-[5,5.5,6,6.5,7]
D-ESD12-[100-200/25]-[4,5,6,6.5,7,8,9]
D-ESD12-[250-500/50]-[4,5,6,6.5,7,8,9]
D-ESD13-[100-200/25]-[8,9,10]
D-ESD13-[250-500/50]-[8,9,10]
D-ESD15-[200-500/50]-[9,10]
D-ESD16-[200-500/50]-[10,11,12]
D-ESD20-[200-500/50]-[12,15]

Minimum order quantity	Standard Shipping Days ?	Head thickness	Shaft diameter tolerance	D/P (Shaft diameter) (mm)	V (Hole diameter) (mm)	L (L dimension) (mm)
1	17 Days	3mm	-0.04/-0.012	4	1.5 ～ 2.5	100 ～ 200
1	17 Days	3mm	-0.04/-0.012	4.5	1.5 ～ 2.5	100 ～ 200
1	17 Days	3mm	-0.04/-0.012	5	2 ～ 3	100 ～ 200
1	17 Days	3mm	-0.04/-0.012	5	2 ～ 3	250 ～ 300
1	17 Days	3mm	-0.04/-0.012	5.5	2 ～ 3.5	100 ～ 200
1	17 Days	3mm	-0.04/-0.012	5.5	2 ～ 3.5	250 ～ 300
1	17 Days	5mm	-0.005/-0.014	6	2 ～ 4	100 ～ 200
1	17 Days	5mm	-0.005/-0.014	6	2 ～ 4	250 ～ 450
1	17 Days	5mm	-0.005/-0.014	6.5	2.5 ～ 4	100 ～ 200
1	17 Days	5mm	-0.005/-0.014	6.5	2.5 ～ 4	250 ～ 450
1	17 Days	5mm	-0.005/-0.014	7	2.5 ～ 5	100 ～ 200
1	17 Days	5mm	-0.005/-0.014	7	2.5 ～ 5	250 ～ 450
1	17 Days	5mm	-0.005/-0.014	7.5	3 ～ 5	100 ～ 200
1	17 Days	5mm	-0.005/-0.014	7.5	3 ～ 5	250 ～ 350
1	17 Days	5mm	-0.005/-0.014	8	4 ～ 6	100 ～ 200
1	17 Days	5mm	-0.005/-0.014	8	4 ～ 6	250 ～ 500
1	17 Days	5mm	-0.005/-0.014	9	3.5 ～ 6.5	100 ～ 200
1	17 Days	5mm	-0.005/-0.014	9	3.5 ～ 6.5	250 ～ 500
1	17 Days	5mm	-0.006/-0.017	10	5 ～ 7	100 ～ 200
1	17 Days	5mm	-0.006/-0.017	10	5 ～ 7	250 ～ 500
1	18 Days	7mm	-0.006/-0.017	12	4 ～ 9	100 ～ 200
1	18 Days	7mm	-0.006/-0.017	12	4 ～ 9	250 ～ 500
1	18 Days	7mm	-0.006/-0.017	13	8 ～ 10	100 ～ 200
1	18 Days	7mm	-0.006/-0.017	13	8 ～ 10	250 ～ 500
1	18 Days	7mm	-0.006/-0.017	15	9 ～ 10	200 ～ 500
1	18 Days	7mm	-0.006/-0.017	16	10 ～ 12	200 ～ 500
1	18 Days	8mm	-0.007/-0.020	20	12 ～ 15	200 ～ 500

Specification table

H	T	Part No.		L											V
H	T	Type	D	L											V
8	3	D-ESD (1.2344 equivalent Hardened)	4	100	*125	*150									1.5
			4	100	*125	*150	*175	*200							2	2.5
			4.5	100	*125	*150									1.5
				100	125	*150	175	*200							2
				*100	*125	*150	175	*200							2.5
10			5	100	*125	*150	*175	*200							2	2.5
			5	100	125	*150	*175	*200	250	*300					3
			5.5	100	*125	150	175	200							2	2.5
				100	*125	*150	175	*200	250	300					3
				100	125	*150	175	*200	250	300					3.5
12	5		6	100	*125	*150	*175	*200	250	*300					2	2.5
				100	*125	*150	*175	*200	250	*300	350	*400	450		3	3.5
				*100	*125	*150	*175	*200	250	*300	350	*400	450		4
			6.5	*100	125	150	175	200	250	300					2.5
				100	125	150	175	*200	250	300	350	*400	450		3
				100	125	150	175	200	250	300	350	400	450		3.5
				100	125	*150	175	*200	250	300	350	*400	450		4
			7	100	125	150	175	200	250	300					2.5
				100	125	150	175	200	250	300	350	400	450		3	3.5
				100	125	*150	175	*200	250	*300	350	*400	450		4	4.5	5
			7.5	100	125	150	175	200	250	300					3
				100	125	150	175	200	250	300	350				3.5	4.5
				100	125	150	175	*200	250	*300	350				4	5
14			8	100	125	*150	*175	*200	250	*300	350	*400	450		4
				100	125	150	175	200	250	300	350	400	450	500	4.5	5.5
				100	125	*150	*175	*200	250	*300	350	*400	450	*500	5	6
			9	100	125	150	175	200	250	300	350				3.5	4	4.5
				100	125	*150	175	*200	250	*300	350	400	450	500	5	6.5
				100	125	150	175	200	250	300	350	400	450	500	6
16			10	100	125	*150	175	200	250	*300	350	400	450	*500	5	6	7
				100	125	150	175	200	250	300	350	400	450	500	5.5
				100	125	150	175	200	250	*300	350	400	450	*500	7
18	7		12	100	125	150	175	200	250	300	350	400	450		4
				100	125	150	175	200	250	300	350	400	450	500	5	6.5	7
				100	125	150	175	*200	250	*300	350	400	450	500	8	9
			13	100	125	150	175	200	250	300	350	400	450	500	8	9
			13	100	125	150	175	*200	250	*300	350	400	450	500	10
22			15					200	250	300	350	400	450	500	9
			15					*200	250	*300	350	400	450	500	10
			16					200	250	300	350	400	450	500	10	12
			16					*200	250	*300	350	400	450	500	11
26	8		20					200	250	300	350	400	450	500	12
26	8		20					*200	250	*300	350	400	450	500	15

Order Example


Part No.	-	L	-	V
D-ESD 6.5	-	125	-	2.5

Alteration


Part No.	-	L	-	V	-	(KC・WKC…etc.)
D-ESD 8	-	500	-	4.5	-	KC4.5

Basic information

Brand	MISUMI	Product composition	Single sleeve	Material	EN 1.2344 Equiv.
Surface treatment	No	Concentricity between the hole and shaft diameters	◎0.08	Inner dia. tolerance	H7
Tapered or not	No	Technical Standard	DIN

Configure

27Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- D-ESD
Clear
Head thickness
- 3mm
- 5mm
- 7mm
- 8mm
Clear
Shaft diameter tolerance
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
Clear
D/P (Shaft diameter)(mm)
4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

12

13

15

16

20
Clear
V (Hole diameter)(mm)
1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

9

10

11

12

15
Clear
L (L dimension)(mm)
[100-200/25mm Unit(s)][200-500/50mm Unit(s)]
Clear
Filter by CAD data type
- 2D
- 3D
Clear