Înregistrați-vă
Criterii de filtrare
  • Material
    • Steel
    • Stainless Steel
  • Surface Treatment
  • [D] Diameter (Mounting Side)(mm)
  • ISO Tolerance (Mounting Side)
  • [P] Diameter (Head)(mm)
      [1.5-20/0.01mm unități]
    • ISO Tolerance (Head)
      • [L] Length (Pin)(mm)
          [2-40/1mm unități]
        • [B] Length (Head)(mm)
            [2-20/0.1mm unități]
          • CAD
          • Est. zile de expediere
            • Toate
            • În 6 zile lucrătoare

          Locating pins, Centring pins / round / small, chamfered flat head / mounting variant selectable

          Cod piesă:

          S-au găsit. 264 candidați nedefiniți.
          Cantitate:

          Desen de ansamblu și tabel de specificații

          Back to the Category Locating Pins / Positioning Pins / Centring Pins

          Technical Drawing - Locating Pins / Positioning Pins / Centring Pins

           

          Small Flat Head/Standard/P,L,B Configurable:Related Image

          Available dimensions and tolerances can be found under the tab More Information.

           

          Basic Properties (e.g., material, hardness, coating, tolerance) - Locating Pins / Positioning Pins / Centring Pins

           

          Material
          No.
          MaterialSurface TreatmentHardnessType
          Press FitTapped
          EN 1.2510 Equiv.-Treated Hardness: 60 ~ 63HRCKFFSAKFFSTA
          EN 1.2510 Equiv.Hard Chrome PlatingTreated Hardness: 50 ~ 55HRC
          Plating Hardness: 750HV ~
          GKFFSAGKFFSTA
          EN 1.2510 Equiv.--BKFFSABKFFSTA
          EN 1.4301 Equiv.--SKFFSASKFFSTA
          EN 1.4301 Equiv.Hard Chrome PlatingPlating Hardness: 750HV ~HKFFSA-
          EN 1.4037 Equiv.-Treated Hardness: 50 ~ 55HRCCKFFSACKFFSTA

          Further specifications can be found under the tab More Information.

           

          Composition of a Product Code - Locating Pins / Positioning Pins / Centring Pins

           

          Part Number-P-L-B
              
          Type D Tol. P
          Tolerance
           D
          KFFSA G S 10-P8.00-L10-B8.0

           

          Alterations - Locating Pins / Positioning Pins / Centring Pins

           

          Small Flat Head/Standard/P,L,B Configurable:Related Image

           

          General Information - Locating Pins / Positioning Pins / Centring Pins

           

          Selection details of receiving pins/locating pins/ centering pins

          - Material: steel, stainless steel, aluminum, plastic
          - Coatings: burnished, nickel-plated, hard chrome-plated, polished, hard chrome-plated and polished, clear anodized
          - Heat treatment: carburized, quenched
          - ISO tolerances mounting side: m6, n6, p6, g6, h6, h7
          - Head diameter: 1 to 30 mm
          - Basic form: wide head, narrow head, cylindrical, with collar, with hole, with flange, double guide
          - Assembly side form: fit, external thread, internal thread, circumferential groove, notch, flat surface
          - Head shape: round, diamond-shaped (sword shape), triangular
          - Tip shape: fastened, rounded, conical, round, spherical, flattened, ball attachment, projectile-shaped

           

          Description/Basics

          centering pins are used to fix the position and limit the degrees of freedom of the objects to be positioned. The precisely manufactured centering pins enable highly precise positioning of the assembly parts. centering pins can position objects as side stopper or center them by insertion. This allows positioning them in the X, Y and Z axes.

           

           centering pint as workpiece stopper

          Application example: centering pin as work piece stopper - (1) work piece, (2) threaded receiving pin

           

          A straight centering pin is only sufficient for the X and Y axis to determine the position of an assembly part. In order to additionally adjust the position in the Z axis, a centering pin with a collar can be used. This combination can reduce the variety of components, since there is no need for an additional support pin.

           

          Positioning pin with collar

          Application example for a centering pin with collar

           

          In most cases a plug-in connection uses a centering pin to protect the work piece or the application during multiple joining and positioning. The centering bushings protect the component from unwanted wear, especially if the objects to be placed are made of a soft material. Therefore, positioning bushings make an application more maintenance-friendly. Wear should always be considered when planning an application. The material and the surface coating of centering pins should be selected according to the application.

           

          Positioning bushing - receiving bushing –  centering bushing
          Application example for a centering bushing - (1) centering bushing

           

          Function

          If objects cannot be placed straight, but slightly inclined on centering pins, a round or chamfered head shape can be used. This helps ensure that the objects do not jam with the centering pins and the process runs smoothly. A round or chamfered head shape is also advisable for applications that are highly repetitive (cycles).

           

          Receiving pin with collar - threaded receiving pin - receiving pin with collar - receiving pin with thread

          Application example for an inclined infeed - (1) centering pin rounded head, (2) workpiece

           

          For the highest possible positioning accuracy centering pins should be used in pairs as much as possible. The respective distance between the centering pins also influences the position accuracy. If it is chosen large, it can improve the accuracy of the object’s positioning. If there is a large distance between the centering pins (B), one of the locating pins should have a diamond-shaped head (sword pin), since a sword pin almost prevents tilting. The use of a third centering pin in an L-shaped (triangular) arrangement may improve the positioning accuracy even further. In order to ensure that the centering pins are not interchanged, centering pins with different diameters should be selected.

           

          Sword bolts - sword pin with thread

          Application example for a sword pin - (1) sword pin (diamond-shaped), (2) centering pin (round)

           

          MISUMI offers various mounting variants for centering pins in order to keep applications maintenance-friendly. Centering pins with internal threads can be interchangeably fastened with a screw through the mounting plate from underneath. If access to the underside is difficult, a centering pin or sword pin with external thread can be used. The assembly and disassembly of the centering pins can thus be easily designed by means of the various mounting versions.

           

          Threaded locating pin - external threaded locating pin - internal threaded locating pin

          Centering pin with external thread/ centering pin with internal thread

           

          Areas of Application

          centering pins are used in work piece carriers as well as the highly accurate positioning of components in test benches. centering pins enable highly precise positioning of objects with all degrees of freedom, thanks to the versatile and highly configurable shapes. The wide variety of MISUMI centering pins offers a suitable shape for every application. Centering pins are used for thin sheets as well as for heavy and complex components. This means that centering pins can be used across almost all industries of plant engineering and mechanical engineering. In many applications, centering pins are indispensable, as they enable a highly accurate positioning of the components.

           

          Materials

          The MISUMI centering pins are available in the following materials: steel, stainless steel, aluminum, plastic . Pins made of steel and aluminum are available in both hardened and coated versions. With a high number of cycles, the use of a hardened material is recommended, as these have a higher wear resistance.

           

          Corrosion resistance

          The following salt water spray test was performed on the raw material (see table) of the centering pins and mounting pins. Corrosion resistance was determined based on the test times of 48 and 96 hours.

           

           

          EN 1.4305 equivalent

          EN 1.4301 equivalent

          EN 1.4125 equivalent

          EN 1.2510 equivalent

          Before the test

          48h

           centering pin –  centering pin - sword pin - sword pins –  centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

          96h

          An image containing food.  Automatically generated description

           centering pin –  centering pin - sword pin - sword pins –  centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

          centering pin salt water spray test (according to JIS Z2371)

           

          Shear load in comparison

          During a test procedure, the shear load of a centering pin was tested with different steels. The tested centering pin was based on JPBB8-10 and was tested for a shear load in a device (see figure). The following table lists the test results for comparison purposes.

           

          Receiving pin –  centering pin –  centering bolt
          Application example for the shear load of receiving bolts

           

          Materials

          Shear load

          Hardness

          EN 1.2510 equivalent

          65 kN

          60 ~ 63 HRC

          EN 1.4301 equivalent

          27 kN

          10 ~ 20 HRC

          EN 1.4125 equivalent

          56 kN

          50 ~ 55 HRC

          Comparison table for shear loads on receiving pins, reference values

           

          Coatings

          MISUMI locating pins are available in burnished, hard chrome-plated or anodized to protect them from corrosion. Locating pins that have to withstand many cycles can be hard chrome-plated. The hard chrome plating provides a high surface hardness and provides the locating pin with high wear resistance. The selectable polished surface also ensures good surface roughness of the cylinder pins and helps to achieve good sliding properties. Aluminum locating pins are translucent anodized to protect them from corrosion and wear.

           

          Dimensions

          Locating pin - locating pin with wide head - locating pin large head

          Locating pin with wide head

          two-stage locating pin - stepped locating pin - double locating pin

          Locating pin, two-stage

          Locating pin - locating pin with narrow head - locating pin small head

          Locating pin with narrow head

          Locating pin with collar - locating pin

          Locating pin with collar

          Locating pin - cylindrical locating pin

          Cylindrical locating pin

          Locating pin - locating pin with through-hole - locating pin with fastening hole - locating pin with countersunk

          Locating pin with fastening hole

          Locating pin with flange - locating pin

          Flanged locating pin

          Locating pin - locating pin with flange - locating pin with cone

          Conical flanged locating pin

            

            

          Instructions for Use / Installation Information - Locating Pins / Positioning Pins / Centring Pins

           

          Maintenance

          To facilitate maintenance for the centering pins, V-shaped wear grooves can be applied to the centering pin. The 0.2 mm deep grooves serve as a wear indicator of the usable surface. This makes the visual wear on the centering pin comprehensible and makes it easier to maintain the accuracy of the device. The wear grooves of the centering pins are only available with hardened and round centering pins.

           

           centering pin –  centering pin - sword pin - sword pins –  centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

          Example of a centering pin with wear groove (red)

           

          Application Examples - Locating Pins / Positioning Pins / Centring Pins

           

          Locating bolt - locating pin - locating bushing with collar

          centering pin/ centering bushing with collar - (1) centering pin, (2) centering bushing

          Locating bolt - locating pin - locating bushing

          centering pin/ centering bushing - (1) centering pin, (2) centering bushing, (3) mounting plate

          Locating bolt - locating pin –  centering pin

          Workpiece carrier with centering pin - (1) circuit board/printed circuit board, (2) centering pin

          Locating bolt - locating pin –  centering pin - mounting pin

          Workpiece carrier with centering pin and positioning pin - (1) centering pin, (2) positioning pin

          Positioning pin with cone - locating bolt with cone - locating pin with cone –  centering bolt two-stage locating pin two-stage - locating bolt two-stage

          Two-stage centering pin with cone - (1) centering pin, (2) workpieces

          Positioning pin with cone - locating bolt with cone - locating pin with cone –  centering bolt two-stage locating pin two-stage - locating bolt two-stage

          Two-stage centering pin with cone and internal thread - (1) centering pin, (2) workpiece

             

             

          Supplementary Article

           

          Positioning pin/spacer bolt

          Locating pin - DIN 6321 - DIN6321 - support pins - receiving pins

           

          Centering pins for fixtures

           centering pin - locating pin - locating bolt - receiving pin - receiving bolt

           

          Centering bushings/test bushings

          Locating bushings - receiving bushings

           

          Clamping technology

          Quick clamps - tension lever

           

          Push-Down Clamp

          Spannvorrichtung - Haltevorrichtung - Federspanner

           

          Industrial Applications

           

          3D printer industry
          Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde
          Automotive industry
          Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde
          Pharmaindustrie
          Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde
          Packaging industry
          Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde

           

          Lista codurilor de piese

          Număr de articole
          Cod piesă

          Type (Mounting Side)

          Material

          Surface Treatment

          Heat Treatment

          [D] Diameter (Mounting Side)

          (mm)

          ISO Tolerance (Mounting Side)

          [P] Diameter (Head)

          (mm)

          ISO Tolerance (Head)

          [M] Diameter (Screw)

          (mm)

          [L] Length (Pin)

          (mm)

          [B] Length (Head)

          (mm)

          RoHS?Cantitate minimă per comandă
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          2
          0.005/0
          1.5 ~ 2
          0.005/0
          -
          2 ~ 4
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          3
          0.005/0
          1.5 ~ 3
          0.005/0
          -
          3 ~ 6
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          4
          0.005/0
          2 ~ 4
          0.005/0
          -
          4 ~ 8
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          5
          0.005/0
          2 ~ 5
          0.005/0
          -
          5 ~ 10
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          6
          0.005/0
          2 ~ 6
          0.005/0
          -
          6 ~ 12
          4 ~ 12
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          8
          0.005/0
          3 ~ 8
          0.005/0
          -
          8 ~ 16
          6 ~ 15
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          10
          0.005/0
          3 ~ 10
          0.005/0
          -
          10 ~ 20
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          12
          0.005/0
          5 ~ 12
          0.005/0
          -
          12 ~ 24
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          13
          0.005/0
          6 ~ 13
          0.005/0
          -
          13 ~ 26
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          16
          0.005/0
          10 ~ 16
          0.005/0
          -
          16 ~ 32
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          20
          0.005/0
          13 ~ 20
          0.005/0
          -
          20 ~ 40
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          2
          0/-0.005
          1.5 ~ 2
          0.005/0
          -
          2 ~ 4
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          3
          0/-0.005
          1.5 ~ 3
          0.005/0
          -
          3 ~ 6
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          4
          0/-0.005
          2 ~ 4
          0.005/0
          -
          4 ~ 8
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          5
          0/-0.005
          2 ~ 5
          0.005/0
          -
          5 ~ 10
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          6
          0/-0.005
          2 ~ 6
          0.005/0
          -
          6 ~ 12
          4 ~ 12
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          8
          0/-0.005
          3 ~ 8
          0.005/0
          -
          8 ~ 16
          6 ~ 15
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          10
          0/-0.005
          3 ~ 10
          0.005/0
          -
          10 ~ 20
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          12
          0/-0.005
          5 ~ 12
          0.005/0
          -
          12 ~ 24
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          13
          0/-0.005
          6 ~ 13
          0.005/0
          -
          13 ~ 26
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          16
          0/-0.005
          10 ~ 16
          0.005/0
          -
          16 ~ 32
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          20
          0/-0.005
          13 ~ 20
          0.005/0
          -
          20 ~ 40
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          2
          g6
          1.5 ~ 2
          0.005/0
          -
          2 ~ 4
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          3
          g6
          1.5 ~ 3
          0.005/0
          -
          3 ~ 6
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          4
          g6
          2 ~ 4
          0.005/0
          -
          4 ~ 8
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          5
          g6
          2 ~ 5
          0.005/0
          -
          5 ~ 10
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          6
          g6
          2 ~ 6
          0.005/0
          -
          6 ~ 12
          4 ~ 12
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          8
          g6
          3 ~ 8
          0.005/0
          -
          8 ~ 16
          6 ~ 15
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          10
          g6
          3 ~ 10
          0.005/0
          -
          10 ~ 20
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          12
          g6
          5 ~ 12
          0.005/0
          -
          12 ~ 24
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          13
          g6
          6 ~ 13
          0.005/0
          -
          13 ~ 26
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          16
          g6
          10 ~ 16
          0.005/0
          -
          16 ~ 32
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          20
          g6
          13 ~ 20
          0.005/0
          -
          20 ~ 40
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          2
          h7
          1.5 ~ 2
          0.005/0
          -
          2 ~ 4
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          3
          h7
          1.5 ~ 3
          0.005/0
          -
          3 ~ 6
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          4
          h7
          2 ~ 4
          0.005/0
          -
          4 ~ 8
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          5
          h7
          2 ~ 5
          0.005/0
          -
          5 ~ 10
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          6
          h7
          2 ~ 6
          0.005/0
          -
          6 ~ 12
          4 ~ 12
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          8
          h7
          3 ~ 8
          0.005/0
          -
          8 ~ 16
          6 ~ 15
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          10
          h7
          3 ~ 10
          0.005/0
          -
          10 ~ 20
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          12
          h7
          5 ~ 12
          0.005/0
          -
          12 ~ 24
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          13
          h7
          6 ~ 13
          0.005/0
          -
          13 ~ 26
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          16
          h7
          10 ~ 16
          0.005/0
          -
          16 ~ 32
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          20
          h7
          13 ~ 20
          0.005/0
          -
          20 ~ 40
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          2
          m6
          1.5 ~ 2
          0.005/0
          -
          2 ~ 4
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          3
          m6
          1.5 ~ 3
          0.005/0
          -
          3 ~ 6
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          4
          m6
          2 ~ 4
          0.005/0
          -
          4 ~ 8
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          5
          m6
          2 ~ 5
          0.005/0
          -
          5 ~ 10
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          6
          m6
          2 ~ 6
          0.005/0
          -
          6 ~ 12
          4 ~ 12
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          8
          m6
          3 ~ 8
          0.005/0
          -
          8 ~ 16
          6 ~ 15
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          10
          m6
          3 ~ 10
          0.005/0
          -
          10 ~ 20
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          12
          m6
          5 ~ 12
          0.005/0
          -
          12 ~ 24
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          13
          m6
          6 ~ 13
          0.005/0
          -
          13 ~ 26
          6 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          16
          m6
          10 ~ 16
          0.005/0
          -
          16 ~ 32
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          20
          m6
          13 ~ 20
          0.005/0
          -
          20 ~ 40
          7 ~ 20
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          2
          p6
          1.5 ~ 2
          0.005/0
          -
          2 ~ 4
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          3
          p6
          1.5 ~ 3
          0.005/0
          -
          3 ~ 6
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          4
          p6
          2 ~ 4
          0.005/0
          -
          4 ~ 8
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          5
          p6
          2 ~ 5
          0.005/0
          -
          5 ~ 10
          2 ~ 10
          10
          1 bucăți
          Straight (Press-Fit)
          [Steel] EN 1.2510 Equiv.
          No Treatment
          No Treatment
          6
          p6
          2 ~ 6
          0.005/0
          -
          6 ~ 12
          4 ~ 12
          10
          1 bucăți
          Preț unitar (fără TVA)(preț unitar cu TVA incluse)
          Dată de expediere standard
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare
          -
          ( - )
          6 zile lucrătoare

          Informații detaliate

          Informații de bază

          Desen de ansamblu și specificații

          Back to the Category Locating Pins / Positioning Pins / Centring Pins

          Technical Drawing - Locating Pins / Positioning Pins / Centring Pins

           

          Small Flat Head/Standard/P,L,B Configurable:Related Image

           

          Specification Tables - Locating Pins / Positioning Pins / Centring Pins

           

          ■Tolerance Selection
          D
          or
          P
          Standard GradePrecision Grade
          MPGHSAB
          m6p6g6h7---
          1.50
          ~
          3.00
          +0.008
          +0.002
          +0.012
          +0.006
          -0.002
          -0.008
          0
          - 0.010
          0
          - 0.01
          + 0.005
          0
          0
          - 0.005
          3.01
          ~
          6.00
          +0.012
          +0.004
          +0.020
          +0.012
          -0.004
          -0.012
          0
          - 0.012
          6.01
          ~
          10.00
          +0.015
          +0.006
          +0.024
          +0.015
          -0.005
          -0.014
          0
          - 0.015
          10.01
          ~
          18.00
          +0.018
          +0.007
          +0.029
          +0.018
          -0.006
          -0.017
          0
          - 0.018
          18.01
          ~
          30.00
          +0.021
          +0.008
          +0.035
          +0.022
          -0.007
          -0.020
          0
          - 0.021
          The unit price of Precision Type is the price of Standard Type multiplied by 1.1.
          Hard Chrome Plating products are not available in Precision Grade Tolerance.

          ■Press Fit
          Part NumberP
          0.01mm Increment
          L
          1mm Increment
          B
          0.1mm Increment
          C
          TypeD ToleranceP
          Tolerance
          D
          KFFSA
          GKFFSA
          *
          BKFFSA
          SKFFSA
          HKFFSA
          *
          CKFFSA
          M
          P
          G
          H

          *A
          *B
          S
          M
          P
          G
          H

          *A
          *B
           21.50~2.002~42.0~10.00.1  
           31.50~3.003~62.0~10.0
           42.00~4.004~82.0~10.00.5
           52.00~5.005~102.0~10.0
           62.00~6.006~124.0~12.0
           83.00~8.008~166.0~15.01
          103.00~10.0010~206.0~20.0
          125.00~12.0012~246.0~20.01.5
          136.00~13.0013~266.0~20.02
          1610.00~16.0016~327.0~20.03 
          2013.00~20.0020~407.0~20.0
          Hard Chrome Plating products are not available in Precision Grade* (precision tolerance).

          ■Tapped
          Part NumberP
          0.01mm Increment
          L
          1mm Increment
          B
          0.1mm Increment
          M* Tightening Torque
          N • cm
          C
          TypeD ToleranceP
          Tolerance
          D
          KFFSTA
          GKFFSTA
          BKFFSTA
          SKFFSTA
          CKFFSTA
          M
          P
          G
          H
          S
          M
          P
          G
          H
           64.00~6.00 8~124.0~12.0M3  98 50.5
           6TM2.6- 4
           86.00~8.0011~166.0~15.0M5 461 81
           8TM4 225 6
          10 7.00~10.0011~206.0~20.0M5 461 8
          12 7.00~12.0012~246.0~20.01.5
          13 8.00~13.0013~266.0~20.0M81911102
          1610.00~16.0016~327.0~20.0123
          2013.00~20.0020~407.0~20.0
          Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
          Note the strength of under-head part. >> P.1566 Please confirm pilot hole depth on >>P.1566. Holes may go through.
          * The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P. 2297.) Not applicable when using locking materials or lock washers.

           

          Alterations - Locating Pins / Positioning Pins / Centring Pins

           

          Small Flat Head/Standard/P,L,B Configurable:Related Image