HDAMN (Cast Iron Asymmetrical Flanged Type)
Lubrication-Free
HDAM
Lubricated
Accuracy: JIS B 1558
JIS B 1514
JIS B 1559
Bearing Inner Diameter Tolerance: H7 (Clearance Fit)
Operating Temperature: -15 to +100°C
[ ! ] A grease fitting is included with the lubricated type.
Grease Fitting Nominal Diameter: 1/4-28UNF (Unified Standard)
Components | [M] Material |
(1) Housing | [ M ]EN-JL 1030 Equiv. |
(2) Bearing Track Ring | [ M ]EN 1.3505 Equiv. |
(3) Rubber Seal | [M]Nitrile Rubber |
(4) Set screw | [ M ]EN 1.7220 Equiv. |
Part Number |
HDAMN15 HDAM12 |
Part Number | F | F1 | F2 | C | W | J | t | A | A1 | d | B | S | Mounting Screw Nominal | Basic Load Rating (N) | M1 | Weight (g) (Reference) | ||
Cr (Dynamic) | Co (Static) | |||||||||||||||||
Type | D | |||||||||||||||||
(Lubrication-Free) HDAMN (Lubricated) HDAM | 12 | 110 | 27 | 42 | 52 | 62 | 32 | 13 | 33.3 | 25.5 | 10 | 31 | 12.7 | M8 | 12800 | 6650 | M5 × 0.8 | 600 |
15 | ||||||||||||||||||
17 | ||||||||||||||||||
20 | ||||||||||||||||||
25 | 116 | 45 | 56 | 68 | 34 | 13 | 35.8 | 27 | 10 | 34.1 | 14.3 | 14000 | 7850 | 700 | ||||
30 | 130 | 29 | 50 | 65 | 78 | 40 | 40.2 | 31 | 38.1 | 15.9 | 19500 | 11300 | M6 × 0.75 | 900 | ||||
35 | 144 | 32 | 55 | 70 | 90 | 46 | 15 | 44.4 | 34 | 42.9 | 17.5 | 25700 | 15300 | 1300 | ||||
40 | 164 | 41 | 60 | 78 | 100 | 50 | 16 | 51.2 | 36 | 12 | 49.2 | 19 | M10 | 29100 | 17800 | M8 × 1.0 | 1800 | |
45 | 174 | 43 | 65 | 80 | 106 | 54 | 18 | 52.2 | 38 | 32500 | 20400 | 2100 | ||||||
50 | 184 | 46 | 68 | 86 | 112 | 58 | 54.6 | 40 | 51.6 | 35000 | 23200 | 2400 |
·Features: Only one side has a two-bolt flange, suitable for space saving.