CoroMill Plura HD, Carbide Solid End Mill (without Square Center-Cut, Hardness: 30 HRC or Less) (Part Numbers)
- Volume Discount
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 2N342-0600-PC-1730 |
| 2N342-0800-PC-1730 |
| 2N342-1000-PC-1730 |
| 2N342-1200-PC-1730 |
| 2N342-1400-PC-1730 |
| 2N342-1600-PC-1730 |
| 2N342-2000-PC-1730 |
| 2N342-2500-PC-1730 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shank diameter (d) (mm) | Overall Length (L) (mm) | Neck diameter (D₄) (mm) | Usable length (mm) | Maximum Cutting (mm) | Corner Chamfer Width | |
|---|---|---|---|---|---|---|---|---|---|---|
135.05 € | 1 | Available | 8 Days | 6 | 57 | 5.7 | 20.00 | 13 | 0.10mm | |
188.37 € | 1 | Available | 8 Days | 8 | 63 | 7.6 | 25.00 | 18.00 | 0.10mm | |
237.04 € | 1 | Available | 8 Days | 10 | 72 | 9.5 | 30.00 | 22 | 0.15mm | |
320.48 € | 1 | Available | 8 Days | 12 | 83 | 11.4 | 36.00 | 26 | 0.15mm | |
385.38 € | 1 | Available | 8 Days | 14 | 83 | 13.3 | 38.00 | 30.00 | 0.15mm | |
512.86 € | 1 | Available | 8 Days | 16 | 92 | 15.2 | 42.00 | 34.00 | 0.25mm | |
765.50 € | 1 | Available | 8 Days | 20 | 104 | 19 | 52.00 | 42.00 | 0.25mm | |
1,051.75 € | 1 | Available | 8 Days | 25 | 121 | 24 | 63.00 | 52.00 | 0.25mm |
Loading...
Basic information
| work material | General Steel / Cast Iron | Number of flutes(sheet) | 5 | Type | Square |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Shank diameter tolerance | h6 | Corner Chamfer | 45° |
| Maximum Ramping Angle(°) | 7 |
Configure
Basic Attributes
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Neck diameter (D₄)(mm)
-
Usable length(mm)
-
Maximum Cutting(mm)
-
Type
- 2N342-□-PC-1730
Filter by standard shipping days
-
- All
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.