Digital Height Master, Inch (Part Numbers)
This is a standard model with a digital display, that offers you the following benefits:
- It gives you all the essential specifications required for a versatile height standard.
- You can use it to calibrate and set height gauges and other measuring instruments.
- Models have two measuring faces on the same level, one facing up and the other down.
- It gives you all the essential specifications required for a versatile height standard.
- You can use it to calibrate and set height gauges and other measuring instruments.
- Models have two measuring faces on the same level, one facing up and the other down.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
515-375
Basic information
| Product Category | Measuring equipment | ABS / INC (INC ZERO) | Yes | Auto Power OFF After 20 Min. Non Use | Yes |
|---|---|---|---|---|---|
| Battery Life | Approx. 1.8 years | Block Pitch Accuracy | Range ≤ 310 mm : ±1.5 µm310 < range ≤ 450 mm: ±2.5 µm450 < range ≤ 610 mm: ±3.5 µm | Block Step(inch) | 1 staggered |
| DATA (output with Cable) / Hold (display value) | Yes | Data Output | Yes | Digital Step(inch) | 0.0001 |
| Feed Error(µin) | ±100 | Graduation(mm) | 0.002 | Inch-Metric | Inch |
| Low Voltage Alarm | Yes | Mass(kg) | 9.5 | Micrometer Adjustment(mm) | 20 |
| Micrometer Feed(mm) | 0.5 | Parallelism of Blocks | Range ≤ 310 mm: 2 µm310 < range ≤ 610 mm:2.5 µm | PRESET | Yes |
| Range(inch) | 0.5 - 12 | Retrace Error(µin) | 100 |
This page is Digital Height Master, Inch, part number 515-375.
You can find the detail information about specifications and dimensions on part number 515-375.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.