HALDER Lifting Eyebolts

?* Information on days to ship and prices

• 

  Threaded Lifting Pins, self-locking

  HALDER

  Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
  All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
  
  [Operation]
  The threaded elements are unlocked by pressing the button.

  3D CAD data available

  Starting from∗ ：	175.17 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Lifting Pin Self-Locking

  HALDER

  [Features]
  · Corrosion resistant
  · Heat resistant to 250°C
  · Locating· Bushing use one from 22350.0900 to 0.0936 (for d1 = 8, 10, 12, 16).
  · Fitting for hanging that is speedy and simple to use yet solid.
  · The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally.
  · A tap hole is not required for the item to be hung, only a H11 hole is needed.

  3D CAD data available

  Starting from∗ ：	67.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball Lock Connectors, self-locking, with holder, compact construction

  HALDER

  Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.
  The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood and one version that can be mounted into plastic.
  As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.
  
  [Operation]
  The balls are unlocked by pressing the knob.

  Starting from∗ ：	6.71 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Lifting Pin, Self-Locking, Stainless Steel

  HALDER

  [Features]
  · Has high corrosion and weather resistance enabling use outdoors
  · Pin part uses hardened stainless steel and so has high strength
  · Operating temperature range is to a maximum of 250°C
  · Locating· Bushing use from 22350.0900 to 0.0936 (d1 = 8, 10, 12, 16) as well.
  · Fitting for hanging that is speedy and simple to use yet solid. The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally. A tap hole is not required for the item to be hung, only a H11 hole is needed.

  3D CAD data available

  Starting from∗ ：	121.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking, with rotatable shackle

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  3D CAD data available

  Starting from∗ ：	303.41 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking, for centre holes according to DIN 332

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  3D CAD data available

  Starting from∗ ：	189.97 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking, with rotatable shackle - INCH

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  Notes

  • This product is manufactured in INCH dimensions.
  

  3D CAD data available

  Starting from∗ ：	311.03 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Locating· For Bushing Lifting Pin

  HALDER

  This bushing is a reliable holder for the safety of the lifting pin EH22350. [Features]
  · Mounting is simple and reliable.
  · Can be mounted to products made of various material.
  · Can be used in narrow areas or blind holes.
  · High corrosion resistance
  · Wear resistant

  3D CAD data available

  Starting from∗ ：	34.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball Lock Connectors, self-locking, holder / Bushing holder, function Nominal mm / mm / mm

  HALDER

  Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.The ball lock connector is maintenancefree, soundless and secured against loss.

  Starting from∗ ：	14.09 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking - INCH

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  Notes

  • This product is manufactured in INCH dimensions.
  

  3D CAD data available

  Starting from∗ ：	193.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...